Airport and Buffalo Airstation

I have an Airport card installed in one Pismo and Buffalo Airstation in another. The airport card is able to recieve a wi-fi network signal, but the Buffalo AirStation reports "There was an error joining the Airport Network linksys".
What am I doing wrong? Both computers are identically configured for Airport. When I switch cards the Airport card equipped computer is able to access the network and the Buffalo card doesn't.
I welcome your thoughts.
Thanks.
cornelius

Duane:
Thanks for getting back to me, and for confirming my guess. The Airstation card worked when I used it at my son-in-law's, receiving a signal from his Airport Extreme base station. So, I am pretty sure the card works. Question now is, where should I look for incompatibility or misconfiguration?
cornelius

Similar Messages

Buffalo AirStation G54 and Airport Express Primer

A long time back there was a very good primer on how to set up Airport Express using a Buffalo AirStation G54 as a base station. I can't find it using the search feature. Does anyone know where that primer is or have access to the steps required to set these two devices up?
There was info on the discussions site here and a link to a site with detailed instructions and photos.
Thanks!
JoeL

If you want to configure the Airport Express as a wireless client, just follow David Lovell's instructions posted at the beginning of this discussion:
http://discussions.apple.com/thread.jspa?messageID=1113729&#1113729
If you want to configure the Airport Express to "extend" the Buffalo wireless router's network, you are pretty much on your own. I do recall someone having posted instructions quite some time ago, but that discussion has long since been purged from the discussions server.

Buffalo AirStation WLI-CBG54HP High Power Wireless CardBus in G3 Powerbook

Hi,
I have a G3 Powerbook (Pismo) and I’m running OSX 3.9 and have installed airport 4.1.
I want to get a wireless internet connection for this machine in the form of a PCMCIA card and one that will work with airport.
I’ve searched through some of the previous posts and found lots of relevant info (thanks to all concerned)
A number of posts suggest that the Buffalo Airstation WLI-CB-G54 works ok with this setup but I would like to know if anybody has any experience with the newer high powered version (WLI-CB-G54HP) and is there any reason to think that this one will not work when the standard one does or should they essentially be the same card?
If anyone can help me out here i’d be very grateful.
Barry
PowerBook G3500mhz Mac OS X (10.3.9)

The list referenced above does not reference the card in discussion...the HP variety.
I have just put a WLI-CB-G54HP into my G4 portable (fully updated 10.4.6), and I can tell you that there is no joy. There is no LED, though the card icon pops up on the toolbar above, and it has "Power Off Card" in black, the card stays cool and doesn't appear to be on at all. "Unknown Vendor" and "Access Control" are both gray'd out.
I just checked and the card also doesn't do anything but pop up the icon in my G3 (Pismo? Brown keys...firewire) running OSX Server 10.4.6.
I have used several earlier versions of this card which always worked the instant they were popped in. I have sold many of them to other happy users since they have a hole in the back for an external antenna...a great feature. I have also plugged in the Buffalo USB Wireless device and it doesn't do a thing either.
I expect that we still need to learn the reality of the chip manufacturer.
Meanwhile, the wifi to ethernet converter and router seem to work superbly.
internetmarine
Powerbook Mac OS X (10.4.6)

Is there a way to create a shared net conn. between Airport and Ethenet?

Is there a way to create a shared internet connection between one airport computer and another via ethernet?
I have one computer (lets call this computer 'A') connected to the net via Airport which connects to a router, which is directly connected to my ADSL line.
However, my other computer (computer 'B') is not located within range of this wireless router.
Is there a way for me to send my internet connection via computer A to computer B, via an Ethernet cable or Airport connection or otherwise?
ADSL---Wireless Router---(Airport)---Computer A---(Ethernet)---Computer B

Is there a way for me to send my internet connection via computer A to computer B, via an Ethernet cable or Airport connection or otherwise?
Yes, it's called Internet Sharing, and here's how to set it up...
To setup for Internet Sharing (Wireless to Wired):
Enable Software Firewall (Computer A)
System Preferences > Sharing > Firewall
o Click Stop to start the software firewall
Setup the Network
ADSL Modem > (Ethernet cable) > (Ethernet port) Wireless Internet Router > (wireless) > (AirPort Card) Computer A (Ethernet port) > (Ethernet cable) > (Ethernet port) Computer B
Setup Port Order (Computer A)
System Preferences > Network > Show > Network Port Configurations
o Verify that "AirPort" and "Built-In Ethernet" are enabled.
o Verify that "AirPort" is at the top of the list, followed by "Built-In Ethernet."
o Click "Apply Now."
Configure the Internet Connection (Computer A)
System Preferences > Network > Show > AirPort > TCP/IP
o Configure IPv4: Using DHCP
o Configure IPv6: Automatically or Off
Enable Internet Sharing (Computer A)
System Preferences > Sharing > Internet
o Share your connection from: AirPort
o To computers using: Built-In Ethernet (checked) (Note: Uncheck all other entries in the list.)
o Click Start

Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

How do I clean up my new FIOS connection?
The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

Airport and internet sharing turns off by itself

Hi everyone, I have an imac that I purchased earlier this year, and I use internet sharing to get internet for my ipod touch. Until a few months ago, this worked fine but now airport and internet sharing turn off every time I restart the computer and I have to turn both back on every time. Is anyone else experiencing this problem or know hot to fix it?

Hi and Welcome to Apple Discussions...
Download and install the v10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
One of the "fixes" includes: - compatibility and reliability issues when joining AirPort networks.
After the installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

Late 2005 - Airport and Bluetooth - won't work together

Hi everybody!
I have a problem with my Powermac G5 (late2005).
I have the Airport Extreme with Bluetooth 2.0+EDR card installed.
WLAN and Bluetooth work both if operated separately.
But when Airport is activated and running and I turn on Bluetooth (and connect for example my Magic Mouse) Airport breaks down. - I loose my connection and can't see any other wireless networks.
Switching to another Airport channel din't help.
Does anybody have an idea what to do?
Thanks a lot!
Chris

I just started trying BT.
I allready had a look at the cabling and read about it, that it doesnt matter how the calbes are connected to the airport card.
I don't think I can put anything between the antennas.
The late2005 has the build-in antenna (for Airport and BT)...
But I will have a look if I can place anything between an I will change the cabling...
Thanks so far!
Chris

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

My apple tv keeps losing internet connection. I'm going from modem to airport and from airport to apple tv. I've replaced the modem and the apple tv and it still does it. Internet to my laptop via the airport wifi is fine and never drops out.

I keep having to restart it every time I want to use it. Sometimes I have to restart it multiple times. The cord goes from the cable modem to the airport and then from the airport to the apple tv. I've replaced the apple TV and I've replaced the modem and the problem persists. I assume it has to be the aiport? But the wifi from the airport works fine.
I tried bypassing the airport and going straight from the modem to the apple tv and it wouldn't work. That makes no sense to me.
I had a friend over to try and figure it out and he couldn't. Any idea what could be the problem??

The Ethernet cable from the modem should be connected to the AirPort's WAN (circle of dots) port and a second Ethernet cable should be connected between the AirPort's LAN (opposing arrows) port and the Ethernet port on the Apple TV. Is this the case?
If so, what is the make & model of the modem that the AirPort is connected to. Also what is the exact model of both the AirPort and the Apple TV?

I have an Airport Extreme, it's only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again."

I have an Airport Extreme, the light is only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again." I've tried my iphone 4 with the same result. I've tried the utilty on my pc and same result. The airport is producing a great wireless signal and working to all devices. I really just want to get in and set the password.

eddiedaly wrote:
I have reset several times with no success.
When you did those resets, did you continue to hold in the reset button until the status light blinked several times? If you didn't, then you didn't do a full reset.
Here's what I do to reset an AirPort base station: I unplug it, press in the reset button, then, while continuing to hold in the reset button, I plug it in. (Yes, doing this can be easier for people with more than two hands!) I then watch the status light and wait until it flashes rapidly several times.
I have a Time Capsule that I couldn't configure at one point. To recover from that I had to unplug it for many hours. You might try unplugging your unit overnight.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your original message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Airport and Printer Not working: Please Help!

I'm considering of trowing out my printer or the airport extreme, or my mac pro. The thing is, I don't no which one, So one more try; hope someone can help me!
My printer (Epson SP 2400) is working fine via USB directly and from my old G4 (also via Airport).
I can print from my Mac Pro, via Airport and then via the G4, but not directly from Macpro-airport.
I've got the latest update for every software, read all the articles on this forum (did the http://ftp.easysw.com/pub/cups/contrib/FixAirportPrinter.dmg solvers).
I hope I missed one trick and that someone can get me out of this frustration!
THANKS!

do you have printer driver v6.12, if not here's the link
http://www.epson.com/cgi-bin/Store/support/SupportLeopardDetails.jsp?BV_UseBVCoo kie=yes&oid=54861#stage1
did you contact epson? try them too..

Airport problems after 8/12 airport and security update

My MacBook Pro which had been working flawlessly since I got it last year received the airport and security updates distributed today. After the reboot my airport turns itself off after a few minutes and will not come back on and the computer seems to be running hotter than usual. Booting from a recent clone of the drive without the updates did not fix the problem and the card turned itself off a few minutes after the reboot and will not come back on.
Anyone having similar problems after the update?

Does your problem occur only when unplugged. If so, then maybe this update is for you: http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro. Check it out, but use your own judgment in installing; not much info is provided.

I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

Airport and Buffalo Airstation

Similar Messages

Maybe you are looking for