Airport and Distribution !??

Hi All,
I have a plan... Dangerous I know, however I'm not sure if it would work.
In the near future I will be in a situation where my internet will be coming from a shared source (will be a WiFi hotspot in a marina) I will most likely be issued a fixed IP address which i can connect using (along with the obvious WEP/WPA key). This of course means i can only only connect using one computer.
I have a redundant Mac Mini which I will be using to store media files on to share with my Macbook and my Girlfriends iMac.
What I want to do is use the Mini as a basic server, i.e share files and but most importantly share the internet.
My aim is to have the fixed IP address assigned to the mac mini (headless) and then distribute wirelessly using the internet sharing option, however you cannot share and broadcast using Airport Card.
Can I use an airport express connected to the mini using an ethernet cable to distribute wirelessly (but select ethernet in the settings) and pick up my network using the Airport Card?
Or is it a no go? I am sure there is a simple solution to this but I just don't have enough experience yet.
I have toyed with connecting the iMac and Mac Mini via ethernet and pick up wireless on one and distribute on the other, I am confident that would work as the chain would be;
Airport > Ethernet > Ethernet > Airport > Macbook
However it seems a bit Over the Top just to gain wireless on the laptop!!!!!!!!!!!!!!!!
Please help If you can, its VERRY frustrating.
Many Thanks in advance for your help!
Will

Wilburforce83, Welcome to the discussion area!
Can I use an airport express connected to the mini using an ethernet cable to distribute wirelessly (but select ethernet in the settings) and pick up my network using the Airport Card?
That should work but...
-> OS X's Internet sharing has really no options. So not all access may work from your MacBook.
-> You will need to configure the Mac mini so that web sharing is enabled. This will allow access from the MacBook to the Internet on the normal Internet ports.
-> You will want to configure the AirPort Express (AX) so that it is using a channel as far as possible from the one received by the Mac mini. That will reduce the amount of RF interference between the two.
I have toyed with connecting the iMac and Mac Mini via ethernet and pick up wireless on one and distribute on the other, I am confident that would work as the chain would be;
Although in theory that should work, I bet that you would run into problems since both Macs would be using OS X's Internet sharing.

Similar Messages

Is there a way to create a shared net conn. between Airport and Ethenet?

Is there a way to create a shared internet connection between one airport computer and another via ethernet?
I have one computer (lets call this computer 'A') connected to the net via Airport which connects to a router, which is directly connected to my ADSL line.
However, my other computer (computer 'B') is not located within range of this wireless router.
Is there a way for me to send my internet connection via computer A to computer B, via an Ethernet cable or Airport connection or otherwise?
ADSL---Wireless Router---(Airport)---Computer A---(Ethernet)---Computer B

Is there a way for me to send my internet connection via computer A to computer B, via an Ethernet cable or Airport connection or otherwise?
Yes, it's called Internet Sharing, and here's how to set it up...
To setup for Internet Sharing (Wireless to Wired):
Enable Software Firewall (Computer A)
System Preferences > Sharing > Firewall
o Click Stop to start the software firewall
Setup the Network
ADSL Modem > (Ethernet cable) > (Ethernet port) Wireless Internet Router > (wireless) > (AirPort Card) Computer A (Ethernet port) > (Ethernet cable) > (Ethernet port) Computer B
Setup Port Order (Computer A)
System Preferences > Network > Show > Network Port Configurations
o Verify that "AirPort" and "Built-In Ethernet" are enabled.
o Verify that "AirPort" is at the top of the list, followed by "Built-In Ethernet."
o Click "Apply Now."
Configure the Internet Connection (Computer A)
System Preferences > Network > Show > AirPort > TCP/IP
o Configure IPv4: Using DHCP
o Configure IPv6: Automatically or Off
Enable Internet Sharing (Computer A)
System Preferences > Sharing > Internet
o Share your connection from: AirPort
o To computers using: Built-In Ethernet (checked) (Note: Uncheck all other entries in the list.)
o Click Start

No 'Sales and Distribution-data' in COMMPR01

Hi All,
I've download products from R/3 to CRM and eveything worked out fine, except the following: I don't see any 'tuples' assigned in the 'Sales and Distribution-tab' in COMMPR01. There is also no possibility to assign a tuple in this tab, because the button for 'assigning' is greyed out and I don't want to assign a tuple for every product manually.
Before downloading the products, I've created a org. chart which seems to be fine. In this org chart you can see the correct sales organization and distribution channel. Besides that: 'Obj. Permitted in Determination' is checked.
Can somebody help me with this issue? So how do I incorporate a tuple in the 'Sales and Distribution-tab'?
Kind regards,
Maarten.

Hi Maarten,
Please check the following:
- The value for attribute Tuple(distribution channel,division) in Attributes tab of scenario SALES is not maintained for transaction PPOMA_CRM (Maintain Organizational Model)
Also, the problem might be the buffer is not getting updated.
Please check the following steps in your system.
1.Check flag 'Obj. Permitted in Determination' checked on the attribute
tab in TA PPOMA_CRM for the organization Unit in question
2.Check the buffering for SALES/SERVICE is switched ON in table T77OMATTR
3.Report HRBCI_ATTRIBUTES_BUFFER_UPDATE be executed on a
regular basis -> Please see documentation of this report
I hope, this helps you.
regards
Srikantan

Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

How do I clean up my new FIOS connection?
The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

Airport and internet sharing turns off by itself

Hi everyone, I have an imac that I purchased earlier this year, and I use internet sharing to get internet for my ipod touch. Until a few months ago, this worked fine but now airport and internet sharing turn off every time I restart the computer and I have to turn both back on every time. Is anyone else experiencing this problem or know hot to fix it?

Hi and Welcome to Apple Discussions...
Download and install the v10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
One of the "fixes" includes: - compatibility and reliability issues when joining AirPort networks.
After the installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Product is not valid for Sales org and distribution chain

Hello friends,
When i am saving the trade promotions , i am getting error message
"Product XXXX is not valid for distribution chain XXXX, XXXX"
I have maintained sales organization and distribution channel in commpr01 under sales and distribution tab.
kindly help.
Regards,
Srinivas

Hi Srinivas,
the error is raised from the trade promotion CCA check - raised from method CL_CRM_MKTGS_PD_CCA_CHECK_HDLR~CHECK. There are the following checks performed:
* There are several checks to do based on the distribtion chain
* Execute the checks and identify which products fail which check
1. *   Determine if the product passes the distribution chain check
2. *   Determine if the product category 1 of the product assignment
   *   passes the product category check
3. *   Determine if the product category 2 of the product assignment
   *   passes the product category check
4. *   Determine if the product group of the product assignment
   *   passes the product group check
5. *   Determine if the sales status of the product is set to blocked
You may also need to check the sales and distribution data of the product category or product group of the mentioned product, if this is assigned to any.
best regards,
Johannes

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

Tax Conditions for Sales and Distribution using Jurisdiction Code in Canada

Hello everyone,
I would like to share with you a doubt relating taxes for Sales and Distribution in Canada.
The Tax conditions for Sales and Distribution in Canada are the CTX1 (GST - Canada), CTX2 (PST - Canada) and CTX3 (Base + GST). These are the Tax Conditions which appear when creating a Material or a Client for the Canada Region, and are also the ones included in the Canada Standandard Pricing Procedure.
I tried to apply the standard method of creating a Master Record for these conditions, but an error relating the Jurisdiction Code came out while releasing to accounting.
Does anyone one how to procceed? Which are the important issues with Finance Accounting to take in to account?
I would really appreciate any comment relating this issue.
Thank you very much in advanced.
Víctor

Dear Mr. Lakshmipathi,
In first place, thank you very much for your quick response.
I have tried many different procedures to get the aim, and among others, a new access sequence was created to allow the introduction of the Jurisdiction Code (UTXJ is not available for Sales Conditions) but once the Condition is created, it is not recognized when creating the Order ("pricing error: Mandatory condition CTX is missing"). Maybe it has something to do with the fact that these conditions are not included in the Finance Accounting Tax Procedure, where the conditions, which represent the same taxes but with different condition names, are defined for a certain Tax Code and Jurisdiction code.
Among the different SAP notes for the error relating the Jurisdiction code, there was one proposing to change the Condition Category from "D" (Taxes) to a value between "1 and 4". By doing this a new error appears while creating the order, saying that there are conditions in the Tax procedure (JRC1, JRC2)which are not included in the Sales Pricing procedure. By including this conditions in the Pricing procedure, the Tax Conditions existing in the Finance Accounting Tax Procedure are brought to the Order Conditions, in addition to the Sales Tax Conditions. And there is something more, each Tax Condition from the Finance Accounting Procedure appears twice, one with the application V (Sales) with value zero, and one with application TX (Taxes) with the value existing in the Finance Accounting Taxes Procedure. This is how at the end, the corresponding %value of the taxes is brought to the Invoice with the correct Tax Code, and the proper Jurisdiction Code, which is different for each condition.
Thank you very much for your time.
Víctor Liedo

Late 2005 - Airport and Bluetooth - won't work together

Hi everybody!
I have a problem with my Powermac G5 (late2005).
I have the Airport Extreme with Bluetooth 2.0+EDR card installed.
WLAN and Bluetooth work both if operated separately.
But when Airport is activated and running and I turn on Bluetooth (and connect for example my Magic Mouse) Airport breaks down. - I loose my connection and can't see any other wireless networks.
Switching to another Airport channel din't help.
Does anybody have an idea what to do?
Thanks a lot!
Chris

I just started trying BT.
I allready had a look at the cabling and read about it, that it doesnt matter how the calbes are connected to the airport card.
I don't think I can put anything between the antennas.
The late2005 has the build-in antenna (for Airport and BT)...
But I will have a look if I can place anything between an I will change the cabling...
Thanks so far!
Chris

BW for Sales and Distribution.

Hi All,
Can you please provide me some insights into Sales and Distributions and Pricing.
I would like to know the functional aspects of Sales and Distribution.
Please provide me inputs regarding the functionalities of SD and Pricing.
Thanks in Advance,
Sravani
Edited by: sravani kandy on Jun 7, 2008 8:02 PM

Hi,
SD Process Flow
the sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customeru2019s telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents u2013 the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge u2013 creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
Refer
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sap-img.com/sap-sd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Hope this helps.
Thanks,
JituK

Cin in sales and distribution

hi,
can any one tell me the role of CIN in sales and distribution, if possible
post some material regarding CIN configuration.
my e-mail id: [email protected]
thank you.

Hello Sriram,
CIN in other words "Country Version India" is basically used for taxation purposes. Every country has its own tax system..........so SAP has come up with its own country versions for taxation like CIN for India.
<b>The following is the detailed notes on CIN:</b>
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
<b>Reward if helps</b>
Regards,
Sai

New to Sales and distribution

HI all,
I am new to sales and distribution. Please send me some documents regarding project implementation in developent as well as support projects. And also, send me some documents.
thanks and regards
bhaskar
[email protected]

Hi Bhaskar,
Welcome to SDN.
Please check this online document.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDSLS/SDSLS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SD/SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
Hope this will help to start with.
Regards,
Ferry Lianto
Please reward points if helpful as a way to say thanks.

Regarding sales and distribution

how to create condition type with reference to an existing condition type

Hi,
To define Custom Z routine in Sales and Distribution module please follow the following steps.
o Transaction Code - VOFM (Maintain: Requirements and Formulas)
o Menu Path - Formulas --> Condition value.
o Go to bottom of the table control,
o Enter the routine number for Ex. 900 and some meaningful description,
o It will ask the Access key, enter the available access key. Now ABAP editor will be opened, you can switch off Modification Assistant from Menu EDIT &#56256;&#56518; Modification operation &#56256;&#56518; Switch off Assistant.
o In custom routine we can use KOMP structure, where we can get the pricing value,
o To access the whole condition record, we can use structure XKOMV. But to access this XKOMV structure we have to define one internal table of type INDEXED_KOMV and pass the structure XKOMV value to the new defined internal table.
o Depending upon the requirement you can refer KOMP or XKOMV structure in your code.
o The calculated result we have to pass to XWERT field, which will be display to the condition record.
o To activate the subroutine we have to first save the code and come out from the routine. In Maintain: Formulas Condition value screen, select routine to activate and select Edit menu &#56256;&#56518; Activate.
o After activating the custom routine, functional person will attach this custom routine to the condition type of the pricing procedure at AltCty column.
o Function person can define one field at Subto column for condition type, which we can use in our custom routine.
o For ex. We require to calculate the % discount depending upon the two condition type. To get the condition value for the both the condition type we have to select one field at Subto column. There are two types of fields, one is Copy value to and another one is Carry over value to. One store the condition value whereas second store Condition rate. Depending upon the requirement we can select the field type. Before using the Subto field please make sure that it is not referring to other condition type.
o To calculate the % you have to divide or multiply by 10000 not by 100 due to SAP current type.
This is an example of a code sample:
DATA: WORKFIELD(16) TYPE P DECIMALS 2.
CHECK KOMP-KZWI1 NE 0.
IF XWORKJ NE 0.
WORKFIELD = ( KOMP-KZWI1 - XWORKJ ) * 10000 / KOMP-KZWI1.
XKWERT = WORKFIELD.
ELSE.
XKWERT = 0.
ENDIF.
Regards,
Gaurav

How to know Sales Organization and distribution channel for a material

How to know Sales Organization and distribution channel for a created material

Hi,
For a single material means u can go mm03 7 select the material number 7 select the sales views then press f4 the details u can see.
For any number of materials u can go to se11 & give table name MVKE then select the required parameters & execute.
pandari

Airport and Distribution !??

Similar Messages

Maybe you are looking for