Airport and ethernet at same time

I've got a feeling this is one of those obvious questions which has an obvious answer. I noticed in the network pane of the preferences lists out every type of adapter available to me to connect to a network. I always leave my airport on even when I'm connected to a network with an ethernet cable. So my question is this, if my airport and ethernet are connected to different networks (in my office they're kept separate), which takes priority? Should I turn off one adapter? Just a curious mind.

Whichever network port is above the other in the list of available ports in the network preferences panel this will have priority.

Similar Messages

Using airport and ethernet at same time

I am networked from my intel macbookpro to a G5. I cannot connect to my airport at the same time i'm plugged into ethernet cable. Is there any way around this. This can be done when networking with mac based G5's. I guess it has something to do with the intel technology.

I guess it has something to do with the intel technology.
Actually no, you should be able to connect multiple interfaces (ethernet and wireless) concurrently.

Possible to use Airport and Ethernet at same time?

Short question: I want to use my wired Ethernet connection for my local area network to access my file servers and other computers on my network, and a wireless Airport connection for Internet usage.
Is this possible? How?
It seems that with both "on", I am connecting to both via Ethernet and it is forgoing the wireless network entirely even though it shows as connected to my wireless network.
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.3)

This is normally done like this.
Your Internet Service Provider furnishes you a Modem.
You run an Ethernet cabale from your ISP's Modem to the Wan Port, or uplink port on your wireless Router, ( You will have to purchase the Wireless Router.
Wireless Routers are available in 2 4 and 6 port varietys.
Anything you plug into the ports as many computers as you have ports for hard wired connections. This will allow for wired and wireless connections to the Internet and all can be used simultaniouslly.
Remember each machine you have connected will have to have the correct setting in the Network Preferences.
This can also be done with a Switch or a Hub each varys a little bit on the confiquration.. If you need more information be specific on exactly what all you are trying to hook up and what ISP you have the Modem they furnish, the exact router you are using and the number of machines and how they are set in the Network setting on each,
Normally any wireless router you purchase will give you a step by step on hoe to set it up, in the paper work that comes with them. Good Luck Don

WiFi and Ethernet at same time with Apple TV?

Will the following configuration work? WiFi Router upstairs is connected to the internet (DSL). Could I put a second wifi router downstairs acting as a relay, connecting it to an Apple TV via a short ethernet cable and connect to the Apple TV from my MacBook Pro via an ad hoc wifi network? I don't want to simply put the Apple TV into the network since that means traffic for the Apple TV would have to first go upstairs to that router and then be sent downstairs to the Apple TV. In short, I'd be using the Apple TV both to drive the TV as well as a router to the internet. Possible?
Ted Lee
Minnetonka, MN

Okay, I turned it off and back on and now the wifi symbol shows up instad of LTE. Must have been a glitch.
Also found out we must have dropped the block on external mail accounts at work.
So, problem solved.

I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I updgraded to Safari 5.1 and the problem is now worse. Any solutions?

I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?

I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it.

Airport modem and itunes streamed same time

Is it possible to be online with my wireless connection through (via a Netgear router) and at the same time to stream Itunes to airport express? Currently, my mac G4 asks me to choose one or other of the connections.

You must configure the Express to be a client on the Netgear's wireless network. You can use the Airport Setup Assistant to accomplish this. Make sure you do not specify that you want to extend the range of the wireless network: the Netgear router is incapable of supporting that feature.

Can you use 2 airport expresses at the same time?

I want to play my iTunes through my computer speakers and up to 2 airport expresses at the same time, to fill my house with music without having to blast it in any one room, but iTunes will only play on the computer's speakers or through the airport express, but not both.
Is there a hack to get it to play on multiple airports, like giving both airports the same identity or something?
I could acheive this with extra speakers and lots of wires running all over the house, but I'd like to avoid that.

From the Airport Express FAQ
http://docs.info.apple.com/article.html?artnum=108038#9
Question: Can iTunes send a single AirTunes stream to multiple AirPort Express stations?
Answer: Yes. With iTunes 6.0.2 or later, you can send an AirTunes stream to multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware 6.3. The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.

Internet via airport AND ethernet dropping?

I have a new uMBP 13". When I connect to my home network it is the only computer on the network that will drop it's signal every 10 minutes at least. It searches for the network and reconnects a few seconds later but I have to manually search for the network and select.
I tried it with just the ethernet cable and airport turned off and the same thing happens.
I have an iMac connected wirelessly to the Netgear G router also running snow leopard which works fine.
I know there are discussions about airport dropping but this is airport and ethernet so where do I start with solving the problem?
Thanks

Hello William.
I've had similar problems, as described above. I have called AppleCare; I have found other threads on the forum(s) dealing with AirPort dropping connections; I have found much discussion of the subject on the web. There is a problem, and there appears to be no solution. Here is my related situation.
I have a MacBook Pro with Snow Leopard; an oldish Netgear wireless router; and my wife is connected to this little LAN with my old iBook running Leopard. That machine, with Leopard, never loses a connection whereas my Macbook Pro with SL loses the Airport connection approximately every 24 hours. After talking with the ISP and Netgear I solved that problem initially by rebooting the router. Now, I find, I have only to turn AirPort off and then on again and the connection is reestablished.
Meanwhile, I tried switching over to ethernet. I turned Airport off, and ethernet on, with an automatically assigned DNS address. Again, to my amazement, the connection (with the internet) was dropped, again, about every 24 hours--long about 9:30 in the evening, for me. To reconnect ethernet to the web I only had to click "renew DHCP address" under the Advance tab in the network panel. I.e., the behavior was analogous to what I went thru with Airport.
I have to think that 1) since this doesn't happen to my wife's machine on the same network running Leopard, and since 2) the same thing happens whether I'm using AirPort or Ethernet to connect to the web, that this is something systemic in SL's networking innards.
I went over all of the router's connections and settings (no timing out issue), and I upgraded its firmware successfully. I've done all the usual troubleshooting gimmicks, and, of course, I've discussed this with AppleCare. They haven't the foggiest. Since the problem only recurs in a longish circadian cycle it's not something that can be dealt with over the phone.
I have to believe there's something wrong with the networking software in Snow Leopard. And, for what it's worth, if you do a search for this on Google there is a great deal of similar discussion.
Now my solution is simply to use Airport and to turn the program on and off via the menu bar. Unfortunately it raises cain with syncing--"Mingler" and iCal and iCal's system syncing software run away with the CPU. But that's another thread!
All the best,
Alarik

Airport and ethernet not working other computers are

I have a Mac Mini that I use daily. Today when I tried to get onto the internet the bars for airport in the menu bar were gone and a caution exclamation point was there. I restarted and that did not help. I then plugged in an ethnet cable and refigured the mini for ethernet. that did not work. I know the modem and router are working just fine and so is the ethernet since I have other computers on my home network and they all connect ok. Is the airport and ethernet card connected in that if one goes out so does the other? The mini is 2-1/2 years old. I have a Wii and a satellite box on the same shelf as the mini and they both connect to the internet just fine. is my mini toast?

In system preferences- network do you have show airport status in menu bar checked. To the left in network does airport show up. at the top in nework is it on.

Delete records in a table and at the same time print out for reference

I am working on a req to delete some records from a table and at the same time, record/print the deleted records in the outstream (DBMS_OUTPUT.PUT_LINE)
DECLARE
v_rec_po hst_po%ROWTYPE;
BEGIN
DELETE FROM hst_po po
WHERE abbrpoid = '&opportunity_code'
AND updatedby = (SELECT employeeid
FROM tes_employee
WHERE name = &emp_name)
AND audittimestamp BETWEEN TO_DATE ('&start_timestamp',
'DD-MON-YYYY HH24:MI'
AND TO_DATE ('&end_timestamp',
'DD-MON-YYYY HH24:MI'
END;
I was thinking of using returning into and then using DBMS_output to pull out the delted records, but there will be multiple rows deleted fro this statements. I am stuck here..Can anyone help

How about:
SQL> create table t
2 (x int)
3 /
Table created.
SQL> insert into t
2 select rownum
3    from all_objects
4   where rownum <= 10
5 /
10 rows created.
SQL> declare
2     cnt pls_integer;
3 begin
4     delete from t;
5     cnt := sql%rowcount;
6     dbms_output.put_line ('Removed: '||to_Char (cnt));
7 end;
8 /
Removed: 10
PL/SQL procedure successfully completed.Edited by: Alex Nuijten on Jun 4, 2009 8:58 AM

Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

You can try one thing. Follow these steps:
1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
2. Turn off the sound of the TV where you have connected the Apple TV.
3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
This should work correctly

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

How to collect form responses in adobe formscentral and at the same time receive form responses through email

My client wants to have the form that I created in FormsCentral to be able to collect email responses. So to do this, I downloaded the form as PDF then imported it into Acrobat. I created a button in Acrobat (this will be for the email response part). I used this script for that function:
// This is the form return email. It's hardcoded
// so that the form is always returned to the same address.
// Change address on your form to match the code below
var cToAddr = "[email protected]"
// First, get the client CC email address
var cCCAddr = this.getField("ClientEmail").value;
// Now get the beneficiary email only if it is filled out
var cBenAddr = this.getField("BennyEmail").value;
if(cBenAddr != "")
cCCAddr += ";" + cBenAddr;
// Set the subject and body text for the email message
var cSubLine = "Form X-1 returned from client"
var cBody = "Thank you for submitting your form.\n" + "Save the filled form attachment for your own records"
// Send the entire PDF as a file attachment on an email
this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr, cSubject: cSubLine, cMsg: cBody});
I got it from here: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address
I'm still kinda not sure how it works but I'm getting the idea. Now what I'm having trouble with is, how do I make it so that the user will be required to click on the scripted button and at the same time, also click on the FormsCentral's generated submit button? Because as I see it, the user can click on the scripted button but they can just close out the form without submitting it to FormsCentral.
Is there any way to make my idea work?
Any help is very much appreciated!
Thanks!

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?
I use the Open Explorer Windows to drag and drop the files, but the metadata are not copied. Thanks.

To maintain the metadata you'll need to use one of the third party tools that does this kind of migration. Metalogix has a product with a free trial that we have used before. (Don't remember whether the free version maintains metadata or not).
You can read about it here:
http://www.metalogix.com/Products/Content-Matrix.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is it possible to record and play at same time in swift, is there a option to record without storing the file

I am making a microphone, is it possible to record and play at same time in swift, is there a option to record without storing the file

Its pretty simple with FMS. You just need to do following things:
Publish using FMLE with following settings: (just telling which are needed , rest you configure based on your needs)
Video codec: H.264
Audio Codec: <of your choice>
Server ip: rtmp://<server-uri>/<app-name>
Stream Name: mp4:<stream-name>.f4v
Application : Server-side code
application.onPublish = function(myclient,mystream){
     mystream.record();
application.onUnpublish = function(myclient,mystream){
     mystream.record(false);
Have a client , which subscribes in following live mode:-
ns.play("mp4:<stream-name>.f4v",-1,0,true);   // this is subscribing in live mode
In this way even if file is recorded, your clients are subscribing in live mode so all will be in sync.
Now if you want to disallow any clients who will try to subscribe to "recorded" file when live event is going on, you can achieve using auth adaptor. (let me know if you want to enforce such requirement)
But i think above solution solves your primary problem. Also please let me know if there are any issues in getting it work , i have given bare minimum which is required.

Airport and ethernet at same time

Similar Messages

Maybe you are looking for