AirPort and MacBook Pro Internet Issues

I have two unrelated issues with my network set-up.
My ISP is AT&T U-verse, however I use an AirPort Extreme as my main router. The Extreme network is extended by an AirPort Express so that a PC on the far side of my house can receive the connection. In this part of the house, my MacBook Pro can receive the signal, but the PC running Windows 7 with a Linksys Wireless-G USB Adapter will not connect. This is a new problem, as this computer used to be able to connect (but with a weaker signal than my MacBook) up until about two weeks ago.
The second issue is with my MacBook Pro (2011 model running Lion). Sometimes, when the computer wakes from sleep, I am told that my IP address is in use by another device on the network and that I should enter a new IP address (no idea how to do that). I am unable to get on the Internet when this message is displayed and I have to reboot my AirPort Extreme in order to get back online. I think that when my MacBook wakes from sleep, it is being duplicated on the network because once I was told that the Shared name of my computer was already used and that it would change to Anthony's Macbook Pro 2. It also seems to only happen when the MacBook falls asleep while still open.
If it helps, these are the devices connected to my network: MacBook Pro (2011, OS 10.7), iMac (2006, OS 10.6.8), PC (Windows 7), PlayStation 3, Wii, iPhone 3G, iPhone 3GS
Thanks in advance!

Also, just found out that the two iPhones also will not connect to the Express, just my MacBook.

Similar Messages

  • WRT310N v1 and MacBook Pro wireless issues

    Hi all,
    I've been having ongoing wireless issues with my WRT310N v1. I have a macbook pro (early 2009) with mac os 10.5.8. I have cable internet, with a DHCP connection. I have a computer and PS3 hardwired through the router, and they work flawlessly. The wireless, however, has never been what it should be. Internet loads slow, even though the connection speed is pretty good (not as fast as hardwired devices, but close).
    Here are the wireless settings:
    wireless config: manual
    network mode: mixed (the Macbook can get wireless-n, by iPhone is only g)
    Radio band: standard 20 mhZ
    wide channel: 9 (can't change this with this config, unless i go wide channel at 40 mhZ)
    standard channel: 11
    SSID broadcast: enabled
    I've got WPA2 security, with AES encryption. I've set the Beacon interval to 75, and left the Fragmentation and RTS thresholds at default. The firewall is activated, and "filter anonymous internet requests" is disabled.I'm wondering if I'm losing so much speed by broadcasting a mixed signal, instead of just G or just N. I've tried transmitting only in Wireless-N, but there's no noticeable change (and the iPhone can't connect at all). 
    Any input at all would be really appreciated. I'm hoping I don't have to fork over $30 to linksys just to get tech support. Thanks in advance.
    Solved!
    Go to Solution.

    Well its not necessary to power cycle your router everytime whenever you make any changes on your Router. But if you re-configure all the settings on your from scratch, then its better to power cycle your router.

  • MacBook Pro Internet issue

    Hello,
    I bought my MacBook Pro about 3 months ago (my first Mac) and I am having some pretty annoying internet/connectivity issues.
    The issue I am having is that I suddenly lose internet service randomly. The bars on the top right of the screen will still show full, yet I can't connect. I contacted my ISP and they came over to my house and replaced my cable modem. I also bought a new router (Netgear) since my last one was old.
    I still am having the same issue. Also, when it is working it only works if I am maybe 15 feet from my router. If I go any further in the house I lose service again.
    Any help would be much appreciated.
    Thanks

    Access the router's admin area and try changing the channel to 9. Then I would try using OpenDNS servers.

  • WRT54G XBOX360 and MacBook Pro detection issues

    I have been having some issues detecting my Linksys WRT56G wireless router from my MacBook Pro and an Xbox 360 that is using a Linksys wireless gaming adapter. I haven't had this issue before until I taken it to my friends house on the weekend so I can browse/play wirelessly (my friend doesn't have a Wireless router) and when I installed it back into my house, this issue occurs. My MacBook Pro was able to detect my wireless connection and was able to browse the internet but after a few hours I abruptly disconnect and I can no longer find my wireless connection. The only time I can make this work is by resetting my router every time I cannot find my wireless connection. My Xbox 360 does the same thing but it even gets worse when the XBOX360 and my MacBook Pro are using wireless connection -- we only stay connected for only a few minutes.This is what I have done so far:
    1) Restarted computer, reset Linksys WRT56G, reset DSL modem, reset Linksys Wireless Gaming Adapter, DHCP renew/release.
    2) Installed the latest firmware using Linksys Upgrade and EasyLink.
    3) Reset Linksys WRT56G everytime I get disconnected and can no longer find a wireless connection.
    Please I really need help. I have had this issue for a week and I am so frustrated. Thank you so much and I really appreciate your help.
    Message Edited by aeroform on 09-04-2008 10:57 PM

    Ok, my MacBook Pro and XBOX360 can no longer detect my wireless connection. Even after several resets...

  • Magic mouse and Macbook Pro Sleeping issues

    Since I upgraded to Lion a few months ago, I've noticed that occasionally my Macbook Pro (early 2010) won't sleep when I close the lid. I think I've narrowed down (at least one of) the cause(s): if I turn off my bluetooth Magic Mouse after the lid is closed, the computer won't sleep. In fact, it will run hotter and hotter with the lid closed and, when I open the computer, it's non responsive, necessitating a hard reboot. I've checked the pmset log and I see the EHC2 (bluetooth mouse) waking the computer immediately after the clamshell sleep. Has anyone else seen this problem (I've seen similar things on the foroum, but not quite the same) and does anyone know what to do about it?

    Repair disk permissions. Open this app:
    Applications > Utilities > Disk Utility.app
    Ensure your current volume is selected in the left hand column. Click 'First Aid' (if its not already selected), then 'Repair Disk Permissions' at the bottom.
    Ignore the various warnings that come up in the 'Details' window, so long you get a message at the end saying 'Permissions repair complete'.

  • Macbook pro internet issues

    my computer has been taken in three times for internet issues. each time they say it is fixed. I have rest my safari several times, all the internal parts have been checked and are said to be in perfect working order, and i have had the entire profile of my computer wiped clean, having to reinstall everything. now it is doing this and will stay on this gray screen for up to a half hour, until the box that says safari has quit working, or the flash player plug in has quit working. Has anyone else had this problem, if so any help would be great, casue I really do not want to take the computer in again only for them to tell me its fine. 

    my computer has been taken in three times for internet issues. each time they say it is fixed. I have rest my safari several times, all the internal parts have been checked and are said to be in perfect working order, and i have had the entire profile of my computer wiped clean, having to reinstall everything. now it is doing this and will stay on this gray screen for up to a half hour, until the box that says safari has quit working, or the flash player plug in has quit working. Has anyone else had this problem, if so any help would be great, casue I really do not want to take the computer in again only for them to tell me its fine. 

  • 15" Macbook Pro internet issue

    I'm terrible at keeping up with updates, so I did a few updates yesterday and afterwards ran into a pretty obnoxious problem.
    Everytime I close the lid to put my Pro asleep and return to it, whether it be an hour later or just a few minutes, my interent does not want to work.
    Airport says it is connected to my home wifi network, but there is no internet connection. Safari gives me the error message "failed to open page because you are not connected to the internet" and suggests I troubleshoot the connection. When I do a network diagnostic, all options are green and it says that I am connected to the internet. Airport in the network menu also comes up green and says that I am connected and lists an IP address. Safari still says no connection, Chrome and Twitter also report the same thing.
    Switching networks (I have a few networks around my location that I am allowed to use) does not solve the problem, the same exact situation occurs on any network I connect to.
    The only way I have been able to solve the problem is by connected to another network, then doing network disgnostic and changing the connected network to my home network. After doing the diagnostic, everything works fine.
    I can fix it, but this is pretty obnoxious. Anyone have any suggestions?

    sorry to tell you this but there are loads of us with this issue and it seems to be affecting anyone with 10.6.5 and later.
    Nothing you can do except complain and harrass their tech dept as i have done, then they might take it seriously and admit tey have a software issue.
    unbelievable seeing as they cost so much.
    email them and keep your fingers crossed! good luck

  • IMac and Macbook Pro Networking Issue

    Just recently both of my Macs have developed a wierd networking issue.  I am sharing folders on my Windows server (WHS), now this odd slow issue appeared when using a file from the server.  It acts like my network is really slow when opening a file, but my windows machines work fine on it.
    I have not made any changes to the server, I am running a Gigabit Cisco network (not linksys) in my home and this thing has got me stumped.  I installed an anti-virus on the iMac and it found nothing.  Either wired or Wireless I see the same results but only related to the Mac's..... does anyone have an idea what might be doing this?  I am kinda a Mac noob in most aspects so I am looking for any help here.

    It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue. 

  • AEBS, TimeMachine and Macbook Pro

    Ok guys, this is hard to describe but I will give it my best. Please bear with me.
    Since about April, my airport and macbook pro (08 model) simply wouldnt work properly.
    Took the airport to the apple service centre, and he simply replaced the airport for me
    All problems solved, until tonight. The exact problem came back.
    All firmware/software is up to date.
    Its like this. Everything will work great for ages and then my timemachine airdisk will simply dissappear with resulting errors - cannot find disk etc. <-Annoying.
    The mac connects to the airport extreme over wireless N only (5ghz) on startup, SOMETIMES. Other times the AEBS will simply not appear in the wireless network list. If I connect to my wireless modem (billion 7401vgp), the airport is suddenly in the list inside Airport Utility. I can open the advanced config etc and change settings. The aebs is not frozen. The light is green on the base itself and in airport utility.
    Sometime later, it will come back to the wireless network list, and all is good, except for the airdisk.
    Other times, all will work fine the moment i get home, and then randomly and suddenly, the AEBS will lose the net, and a few moments later, will disconnect and the mac will fall back and connect to the wireless modem, which is good for the net, but i bought an AEBS for the wireless N speeds (around 270-290mbit most of the time)
    Obviously the first base station was not the problem. I have tried anything and everything but cannot force faults to replicate. iStumbler shows this is the only 5gig network in the area, and only sometimes can see 2-3 other 2.4gig networks.
    Any and all help greatly appreciated.
    /rant

    See page 33 of the Motorola SURFboard SB4220 User Guide for multiple users setup with this modem. By default, the device connected to either the USB or Ethernet port will get it's IP address from the modem's DHCP server. In turn, when you connect the AEBSn to the modem's Ethernet port, it would get one of these addresses; however, the AEBSn providing NAT & DHCP services itself, will create another subnet of IP address to devices connected to it.
    To allow all devices to be on the same subnet, just connect the PC, via Ethernet or wirelessly, to the AEBSn instead of it's USB connection to the modem.

  • Airport, 10.5.8, and MacBook and MacBook Pros and slow internet

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    If you have Macbook or MacBook Pro, and have upgraded to 10.5.8, you may experience slower than normal airport connection due to a bug found in the original 10.5.8 installer. Apple has released this update for MacBooks and MacBook Pros to address the issue:
    http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro
    To amend what Apple has stated, the System Profiler will indicate you have one of these three MacBook/Pro CPUs:
    o MacBook3,1
    o MacBook4,1
    o MacBookPro4,1
    If you have certain third party routers the update above will not help. In which case, it is recommended that you contact the third party router manufacturer for a firmware update, and find out also if others have your exact same router, and have found a resolution with your issue.
    Wireless issues can be caused by the following:
    1. Interference on the same wireless channel.
    2. Single channel connection from some third party routers not being strong enough to deal with interference. Apple Airport Express, Extreme, and Time capsule wireless routers all support dual channel connections, and also support networking with Windows as well as Mac.
    3. Bad router tables in your router.
    4. Power surges.
    5. Interference from microwaves, or 2.4 Ghz non-cell wireless phones, whose signal is not tempered with channel hopping.
    6. Distances less than 2 feet may have many overlapping wireless waves causing interference from the wireless router.
    7. Distances greater than 150 feet from the wireless router.
    8. Walls with numerous pipes, improper ground wiring, file cabinets with numerous papers between the computer and the router.
    9. Run the hardware test that came with your computer, it may indicate an issue on the logicboard which could also impact your wireless card.
    10. Improper security on your wireless connection. Setting up a WPA2 connection is preferred over WEP, which is preferred over no password.
    11. 802.11n is a draft standard, meaning not all routers support it the same way.
    12. Data corruption in the wireless cache settings, caused by improper system maintenance:
    http://discussions.apple.com/thread.jspa?threadID=1772235
    13. Migrating wireless settings with the Migration Assistant from a PowerPC to Intel Mac, or vice versa. It is better to follow these tips to avoid those problems:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Not everyone will get this problem.
    14. Apple Airport and Time Capsule firmware updates can be found on:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/
    This is the 1st version of this tip. It was submitted on August 14, 2009 by a brody.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    "this tip ready for consideration"
    Please put in:
    http://discussions.apple.com/category.jspa?categoryID=140
    http://discussions.apple.com/forum.jspa?forumID=1222
    http://discussions.apple.com/category.jspa?categoryID=218
    http://discussions.apple.com/category.jspa?categoryID=190
    and any other forum or category you feel is appropriate.

  • Airport extreme loses internet connection all the time with imac and macbook pro

    I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

    Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
    And are there usually full bars?

  • My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

    Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

    Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
    I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
    Playing light, locally hosted steam sidescrollers  like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
    Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
    It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
    Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

  • Blackberry curve 8320 and MacBook pro address book issue.....

    I have a BB Curve 8320 and MacBook pro and am currently using PocketMac for synching. My address book contacts have all been copied onto my blackberry except for the e mail field on each of the contacts. Very strange- names, addresses, phone numbers- all okay...no e mails???? Any thoughts. No other issues also with calendar synchs, etc.

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • Imac and Macbook  Pro reset parameters issue

    Looking for advice please.
    Both my Imac and Macbook pro have not resonded upon startup and I have had to reset the paramters on several occassions.
    Can anyone advise why this may have happened.  Both computers less than 4 months old.
    Thanks

    Sometimes files get corrupt or lose their permissions this is normal part of most operating systems. When you lose permissions to a file it will not let you read or write to that file.  This can cause problems with your system because to do work on your system you need to have access to read and write to some files. 

Maybe you are looking for

  • Cut/copy and paste on the iPad I get extra text

    When I cut/copy and paste on the iPad I get extra text symbols like "%". Is there a way to just copy the text without the extra stuff? If I copy from Safari and paste into an email I have to go and erase all the extra text.

  • Extract Pantone color from the PDF using c#.

    hi i have an requirement to extact pantone color from PDF. So i had decided will  go for acrobat.dll or illustrator library to get pantone and other color from the PDF.Can you please help me out how to proceed and get pantone color from PDF using c#.

  • Importing and sorting text file

    I am importing a text file. Now i need to run and if function, so I can sort the text data between positive and negatives. import java.util.Scanner;               //Needed for Scanner Class import java.io.*;                              // Java API C

  • Diagnosing java.lang.OutOfMemoryError: PermGen space

    I am getting this error on our test instance: Exception in thread "Thread-96425" java.lang.OutOfMemoryError: PermGen space (We are using JDK 1.5.0_03) What tools can I use to inspect the contents of PermGen? In particular, is there a way to see all t

  • Can't re-install apps

    when i had bought my new mac about one month ago i purchased Angry Birds with my own apple id. i had uninstalled it because i had beaten it and when the new update came out. wanted to re-install. but i cant. when i click install in the apple id enter