Airport and Time Machine difficulty

Does anyone know of any recent problems with AirPorts, AirPort software, Time Machines, or Time Machine software? I am experiencing problems with both and cannot diagnose the problem.
Airport: I have 3 cameras in my home that I have been able to view form outside the house (and Network) flawlessly for over a year. All of a sudden I cannot view the cameras from outside the house but when I am home and the wireless network is in range they work fine. I checked all of the settings and nothing seems different. I feel it may be a setting in the AirPort that is blocking me but I cannot prove that.
Time Machine: In an attempt to fix the problem above I planned on going back to a "good" point in the Time Machine to correct the issue. Apparently the Time Machine has not saved a backup since May 2013. It always appeared that it was working but I never really checked until now. I called support and was instructed to erase the drive and perform a fresh backup. The process never completes because it either locks up or claims that it will take thousands of days to complete the backup. I've tried this process several times as well as performing a more extensive erasing process. Same results. I just purchased an external drive and I am still having the same extended time problem. Before trying the external drive I was convinced that the Time Machine drive was bad. Now I am starting to think there is a Time Machine software issue.
Any insight or suggestions are greatly appreciated.

HDD = Hard Disk Drive.
I just wanted to make sure what you have. If I understand you correctly you then have a Time Capsule; an AirPort Extreme with a built-in HDD. If this is correct, then of course, it support Time Machine as a backup destination.
I am not aware of any current software issues for Time Machine; however, anything is possible.
At this point I would recommend that you check out Apple Support Communities Time Machine expert Pondini to go through some of his troubleshooting techniques.

Similar Messages

Airport and Time Machine new user questions

Background: Switched my business from PC to Mac June 07--and loving it! Upgraded to Leopard over the holidays and bought a 500Mb wireless backup drive. Setup was easy (thanks forum) and I backed up both MacBookPro's with this drive. Buffalo popped last week and Mac bias now runs deep and the local AppleStore had the the 1 TB model in stock.
My connection is: Cable modem (T-W Roadrunner service)-->Time Capsule-->Linksys/Vonage modem. (USB connection from TC to HP 6210 computer). All computers are .n wireless access.
I have had things happen in my environment that I don't understand and can't figure out how to address:
1.) Download/Upload speed according to Speakeasy is 7,000 kbpd down and 700 plus up. Very happy with this and this is an improvement over my old Linksys router.
2.)However my Vonage was set on medium bandwidth and calls are now garbled whereas the old router they were clear. I changed the Vonage bandwidth to high and the calls are OK.
3.) Software updater called for an update download and the forecasted download time was 8 hours!!!! Web browsing seems to work fine and if anything faster.
4.) When I send e-mail about~80% of the time the e-mail fails "on the selected server". I can try again or choose my .mac account or another account and it goes. sometimes I choose the same account and it goes.
I don't understand and have played with manual configuration only to mess things up so nothing works at all. My server is a Pop server. Any ideas?
Time Machine:
-Initial backup was extremely fast and at least 2x faster then the initial B/U on the Buffalo. Incrementals are un-noticeable now.
-Our second MacBook required the preferences file to be wiped out (corrupted) and the Genius told me all I had to do was repoint Time Machine back to Time Capsule. It currently see's her old backups but does not generate new backups. I don't understand this. If it can see the drive and restore works (we restored mailboxes after renewing preferences) why won't it backup? If I do repoint to TC do I lose the previous backups?
Everything is working but just not as seamless as I would have expected and re-sending e-mail and slow downloads makes no sense to me. Help me if you can.
Thanks;
Boomerang

Boomerang,
Your email issue could have something to do with DNS settings not being in the TC...
Repointing your MacBook to the TC should not have any impact on the previous backups... i.e. it will not delete them.
I am an Apple Consultant in Austin, TX (member of the Apple Consultants Network). Visit my site and keep my info around if you ever need anything. www.mymacplus.com

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

"No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message.

Using airport extreme, an external HD and time machine for wireless backups

Hey All,
The whole reason I bought my airport extreme was to plug an external HD into and use it for backups. Then came time machine and Leopard, and now time capsule!!!
Does anyone know if you can use your airport extreme with an external HD attached and time machine in the same way as time capsule for wireless backups!??? The guy in the Apple store I spoke to says you should be able to if you mount the HD (a little cumbersome); I used to be able to mount the HD in Tiger, but cant in Leopard!!
Thanks!
Message was edited by: Fleery

Fleery wrote:
Does anyone know if you can use your airport extreme with an external HD attached and time machine in the same way as time capsule for wireless backups!???
No. Time Machine is supported in 3 configurations:
1. a directly attached HD
2. Time Capsule
3. A HD connected to a Mac with OS X 1.5 Server
I tried both 1 & 3 and they work perfectly.
The guy in the Apple store I spoke to says you should be able to if you mount the HD (a little cumbersome); I used to be able to mount the HD in Tiger, but cant in Leopard!!
Bogus. That is NOT a supported configuration. It will work for a while and you will eventually start to get errors when Time machine backs up, and they are not recoverable.

Airport extreme and external WD HDD and time machine help plz!

Hi, i have used the AEB with my WD external hard drive perfectly before, but after i moved to a different country, i tried to hook it up again, it does comes some problems now, and i think its because of the new updates.
first of all, i have 2 external HD which are connected to each other via firewire, 1 tb and 500 gb wd hard drives. i hook it to my AEB and it doesnt show on my desktop anymore! so my time machinese couldnt find the HD, next is, i used airport utility, and it detects only 1 of the HD not both, so i tried to hook the usb to my laptop and it shows 2 HD connected with 1 usb connection, so i wonder whats going on here, need help, desperately needs to back up thanks!
i want the old school way, which is the plug and play usb then it shows on my desktop via AEB, it worked i know, cuz i did it before, somehow, now it doesnt, im sure its the update, but at the same time, i cant downgrade as well, im sure there is some solution for this auto mount via AEB and time machine issue in this new 7.2.3 firmware thanks!

Welcome to the discussions!
All you probably really need to know is that +Apple does not support Time Machine backups to a drive attached to the USB port on the AirPort Extreme+ due to likely corruption issues. The odd thing about this issue is that problems won't necessarily occur immediately as most users who have had difficulties with this approach (including me) find that backups work OK...for a time.
The best advice we could offer is that if you decide to try this anyway, make sure that you have another backup plan in place for your important files.
Time Machine backups will be supported if you use the Time Capsule, or if you use a drive that is directly attached to the computer that supports Time Machine.
Message was edited by: Bob Timmons

Setup Time Capsule as wireless device and Time Machine with Ethernet?

I'm running the latest version of Airport Utility (6.3.4) with a TC a1254 and Macbook Pro platinum late 2007.
I have a modem/router Ryge model Wa41r.
Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
I tried letting it configure itself, it held the wifi signal for over 5 min then turned off. Never that way worked again.
Then I configured with other examples seen in Apple communities and expert Apple pages, but it conflicted with my routers signal. I turned off the Wireless Lan Interface and it turned off the Ethernet cable with the connection as well. I tried giving my TC different IP address.
So my Time Capsule gives me this status in flicking amber: Internet connection and Conflicting DCHP Range. (when I connect to my Mac the Internet works)
And strangely the wireless signal appears in my Macbook but not in my Android Phone.
Works fine doing backups when asked via ethernet.
Also when I go to check on it on Airport Utility in other wifi devices it appears but says "Device Not Found - device name- was previously part of your network. Check that is still in range...etc"

I would like to help you but you need to clear up some things..
A Time Capsule is plugged into the network by ethernet.. you back up to it using wireless or ethernet.. it should make no difference which.
When you say this..
Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
I cannot understand.. The Time Capsule plugs into the main modem router.. and should be in bridge mode..
Time Machine is not hardware.. it is the backup software on the computer.. there is no way you can connect Time Machine with ethernet cable. .you can connect the computer with Ethernet Cable..
But you need to clarify please.
If you wish to connect TC to the Modem router by wireless this is not possible. It must connect by ethernet.
You can connect your computer to it using either wireless or ethernet.
And strangely the wireless signal appears in my Macbook but not in my Android Phone.
It is likely the wireless name is not valid.
Make sure all names are short, no spaces and pure alphanumeric. 2-20 characters.. Do not use the Apple recommended names.. they can be totally wrong.
Also the password for wireless should be 8-20 characters but same rules.. pure alphanumeric mixed case and numbers.
Start again.
Factory reset the TC.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Plug it into the main router by ethernet.
Do the setup via the airport utility in a Mac or iOS device.
Follow the setup instructions above.
Then you can connect to the TC LAN ports by ethernet or use wireless on the computer.
Your modem WA41R. I cannot find details in English . .they are all Spanish so we may be having difficulty of language here.
But if the modem is working as router the TC has to be in bridge mode.. it will not work properly in router mode.
So you should see it set as bridge here.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac?
The question pretty much says it all.
I have a Mac Mini with an attached 3TB Hard Drive used for Time Machine Backups.
I have an Airport Extreme base station which services that machine plus several others.
I would like to backup my new iMac and a MacBook Pro to the Mac Mini.
What do I need to do on the mini to export that hard drive so that it can be used as a Time Machine target from the other systems?
All systems are running 10.6.8.

Well you would have to do backups over a network which is much slower and has highest chance of becoming corrupt. I think your best option would be to get an apple time capsule to act as a network and back if thats how you wanna do that

ICloud and time machine not compatible

after installing iCloud, time machine will show me all of my backups but not let me restore any backup info at all. also my email account won't work on my mac pro but does work on my iPhone. anybody else having these kinds of issues? and time machine continues to do backups as scheduled, now just as read only files!
can icloud be dumped from system. I'd rather have all my info than have icloud.

I've had similar problems, with a hard drive connected to an Airport Extreme (essentially same setup as Time Capsule). I eventually found I was creating these problem. If you change any settings relating the disk, i.e. rename the disk, change access permissions etc, Time Machine can no longer connect to the disk. You can get Time Machine to recognise the disk again if you open TM preference and select the Change Disk option. You might have to mount the disk in finder for TM to find it. But once you reselect the disk TM will work again.
I am not saying that you did change any options, but I did this in the past not realising the consequences.
Keith.

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

Lets start over...
Please restart the network.. shut down everything..
Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
Does the TC show up in Airport utility? Are you running wireless or ethernet?
If you still have issues.. plug the TC directly into the computer by ethernet.
Do a full factory reset of the TC.. and see if it now shows up.
Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
You take a screen shot of the TC opened in finder.
eg..
My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture.

Snow leopard and time machine

Hi, I'm using an iMac 21.5" middle 2010 with Mac OS X snow leopard and Time machine on a Time Capsule with 2 GB.
Since yesterday the control light is permanantly flashing yellow, but nevertheless time machine is working an signed a complete bachup, last 2 hrs before.
I'm not sure, if all is correct. Can anybody help?
Many thanks
scharamer

It may just be telling you about the latest firmware update.
Start AirPort Utility (in your Applications/Utilities folder).
Click Manual Setup
Click directly on the word Status (2nd line) and AirPort Utility will indicate what's wrong.
If your network seems to be working OK, the flashing light might indicate that an update for your AirPort device is now available.

Backing up photos on iMac using external hard drive and time machine

How do i back up photos from my imac using an external hard drive and time machine
Thanks in advance

Apple explains how to use Time Machine in http://support.apple.com/kb/ht1427.
Setting up and using TM is very simple to do, connect any external HD (format as Mac OS Extended (Journaled) using Disk Utility ) and your computer shoudl ask if you want to use that EHD for a Time Machine backup. If you have any questions visit your local Apple Store or reseller and they can answer how to setup and use TM and also should be able to offer suggestions on EHDs. My personal preference is OWC (www.macsales.com) Mercury Elite Pro due to the build quality and OWC's level of support.

Cannot Find Photos on External Hard Drive Using iPhoto and Time Machine

Hi everyone,
This is my first time posting on this forum and am really hoping for some help! I have a 2006 PowerBook G4 that is running iPhoto and Time Machine, and I've used an external hard drive to backup everything on the computer via Time Machine. When I plug the external hard drive into my newer 2010 MacBook Pro, I follow this path to try to access the photos:
     External Hard Drive > Backups.backupd > PowerBook G4 12" > Latest > Macintosh HD > Users > Me > Pictures > iPhoto Library
When I click "iPhoto Library", I get the following message:
     "The iPhoto Library is a Time Machine backup, and so cannot be used as the main library. Relaunch iPhoto with <option> key held down to choose another   library."
So, I do as the error message says and I hold down the "option" key and iPhoto launches and says:
     What Photo Library do you want iPhoto to use?
In this case, I choose "Other Library..." and again follow this path:
     External Hard Drive > Backups.backupd > PowerBook G4 12" > Latest > Macintosh HD > Users > Me > Pictures > iPhoto Library
When I choose this, I again get the following message:
     The iPhoto Library is a Time Machine backup, and so cannot be used as the main library. Relaunch iPhoto with <option> key held down to choose another   library.
So as you can see, I'm feeling a bit like I'm chasing my tail in trying to open these photos. I did follow another user's advice and confirm that all photos are infact on the hard drive by using the "control" button and clicking "iPhoto Library" under the pictures folder, and choosing "Show Package Contents". All looks to be in tact in the "originals" folder when showing package contents, however, I just can't find a way to actually view the photos in iPhoto. I really don't want to import all the photos to my current MacBook Pro, because I'd like them to live on the external hard drive (which is formatted for Macs) so that I can browse the photos on the external drive, rather than housing it on my computer.
One other thing I tried was opening iPhoto on my MacBook Pro and going to File > Browse Backups... which essentially opens Time Machine and shows me the photos on my MacBook Pro but gives me no option to view them from my External Hard Drive.
Any super users out there willing to lend me some help?
Thanks!

The iPhoto Library is a Time Machine backup, and so cannot be used as the main library. Relaunch iPhoto with <option> key held down to choose another   library.
You can have an iPhoto library on an external drive and use it from different machines
and you can have a Time Machine backup
The two can not be on the same volume - and iPhoto can not access the TM backup - it must be restored to use it
LN

Can Superduper and Time machine write to the same external volume.

I just setup a 750 GB external drive single partition using firewire 800. Any problem with superduper and time machine writing to the same volume?
Ron

Can Superduper and Time machine write to the same external volume.
Yes, they can write to the same partition.
I am doing this, and can report no problems so far. TM still backs up and SuperDuper is bootable.

Airport and Time Machine difficulty

Similar Messages

Maybe you are looking for