Airport and Windows Vista Ultimate 64

Tomorrow I plan on buying windows vista ultimate for my Mac pro. I bought it in late 2008. I am wondering will I be able to get wireless internet with it. Or should i just get Vista ultimate 32? Thanks for the help

BTW i plan on using the Vista partition for gaming only

Similar Messages

  • My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

    my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
    How to enable iTunes in the Windows XP Firewall
    EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
    How to enable iTunes in the Windows Vista and Windows 7 Firewall
    Message was edited by: b noir

  • Burning issues with itunes and Windows Vista Ultimate

    I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
    Thanks

    paul's onto it.
    if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
    here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
    GEAR drivers

  • Oracle Database 11g Release 1 (11.1.0.6.0)  and Windows Vista Ultimate

    Hi,
    Hoping someone who has already tried/installed can let me know whether the installation of Oracle Database 11g Release 1 (11.1.0.6.0) will work on Windows Vista Ultimate (32bit) or knows whether it does or doesn't?
    Thanks.
    Tony.

    For this kind of information , check Oracle certification page
    Certify - Oracle's Certification Matrices

  • I tunes 7.3  and Windows Vista ultimate 64 bit ( not 32-bit) compatibility

    Dear All,
    I tried succesfully to sync my I tunes with my HP Laptop with the Windows Vista Ultimate OS 64 bit not 32-bit version.Has anyone been able to sync it succesfully?
    If not does anyone know of a patch or when apple is going to come up with a version of Itunes that would take care of this incompatibility?
    Mo

    Hi,
    Try disabling your antivirus software. This seems to work for alot of people Tell me if this works for you as well.
    xxmitchxx90

  • ITunes and Windows Vista Ultimate 64-bit

    Is there an iTunes version that is compatible with the 64-bit version of Windows Vista Ultimate? If so, can you please let me know?

    I have iTunes 7.3.2.6 running on Ultimate Vista 64. I initially had problems with it recognizing my DVD-RW but eventually found a solution in this group related to the GEAR drivers.
    The only problem that remains is not recognizing the current user as administrator unless you "launch as administrator." But this has not affected performance.
    BTW, when application developers list "32-bit Vista" under system requirements, this does not mean that 64-bit Vista versions can't run it, it only means that it's not a 64-bit app. Vista 64 is designed to run 32-bit apps.
    Message was edited by: erazoner

  • AirPort Disk - Issue with Windows Vista Ultimate

    I setup an AirPort Extreme network, with a shared USB Drive and so far I've only found one issue.
    When attempting to create new files and renaming them, or rename pre-existing files on the shared USB Drive using Windows Vista Ultimate I get the following Yes/No dialog:
    "The Z:\ folder does not exist. The file may have been moved or deleted. Do you want to create it?"
    Then there's information about the mapped drive. If I click "Yes" in the dialog, then the dialog goes away for a moment then pops back up. I can't create a new file directly on the shared AirPort Disk, nor can I modify or create and rename new files on the disk without getting stuck in the loop.
    I can, however, create a new file locally on the Vista box and copy it up, and I can even create a new directory locally with files and copy them up without issue.
    Now, the issue does not happen when I use my MacBook or my XP machine. This issues seems to be a Windows Vista issue only, and I haven't seen anyone else reporting it.
    Here's information about the disk share implementation:
    - The disk is password protected (turning on accounts really breaks the ability of Windows Vista to work with the disk)
    - The disk is Mac Formatted with Case Sensitivity, and Journaling
    This works like a top for OS X and Windows XP, just not Vista. I'd like to getting working properly for all machines.
    If anyone's got some advice on this one, I'd love to hear it.

    Here's a little more information regarding the issue:
    - It's an AirPort Extreme Wireless Router with Firmware ver. 7.1
    - The Windows Vista Ultimate PC has the most recent Microsoft patches to-date, and has the most recent Apple Airport Utilities Software to-date.

  • Windows Vista Ultimate and Error -42018

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

  • I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

    I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
    Microsoft Windows Vista Ultimate Edition (Build 6000)
    Dell Inc. Studio 1535
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0020AEDC02A7C4B8
    Current user is an administrator.
    The current local date and time is 2012-04-17 17:05:40.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
    Description:          Dell Wireless 1397 WLAN Mini-Card
    IP Address:          192.168.0.118
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Tue Apr 17 16:59:28 2012
    Lease Expires:          Wed Apr 18 16:59:28 2012
    DNS Servers:          192.168.20.254
                        192.168.30.217
    Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
    Description:          Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-17 17:04:26.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: Optiarc DVD+-RW AD-7640S, Rev HD14
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device Service not found.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller.  Device is working properly.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    This should get your itunes store connection working.
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Windows Vista Ultimate and Oh Crap!

    Hello All,
    This post is a bit of a question and a bit of advice. I am a System's Analyst / Network Engineer. I have a lot of experience with computers, Windows, and Mac OS. Eight days ago I started working with a client on a brand new PC with ALL the bells and whistles. The PC is an HP Pavilion running Windows Vista Ultimate, RAID 1 (Mirror), Removable Media Drive, Great Sound via X-Fi, Great Video via Nvidia PCI-X, and SATA (Obviously since it's running a RAID array).
    I got everything setup and running great and as the last step installed iTunes and Quicktime. My client has a few thousand songs, a ton of TV shows, and a whole mess of movies ALL purchased thru iTunes store. Nothing is pirated, stolen, or illegal on this computer. Now, here's where it gets good.
    I did the import in a few stages to make the data transfer a little faster. I did music, then TV, then movies. I tested a song and it worked great. I went to play a TV show and the computer slowed to a halt. I let it go like this until activity started on the machine again. It took about 5 minutes and then iTunes crashed. A second later the computer blue-screened and rebooted.
    As soon as the reboot occured the RAID array came up in a failed state. I had to rebuild the array and get back into Windows. I tried again with the TV show, had the same result, tried again with a movie, and again had the same result. I called HP and they told me to fresh install the OS so I did. Again, same result.
    This has been going on now for a few days with several different tests and several array rebuilds and OS installs. I would have had HP replace the computer or the motherboard but NOTHING else on the entire PC was causing this problem and diagnostics showed no hardware issues. There is/was no reason to suspect faulty hardware or software other than iTunes and/or Quicktime.
    Today I ran the final tests and a fresh rebuild. I found some documentation stating that iTunes had some compatibility issues with Vista and decided to try some other videos that I could run in Media Center. They worked flawlessly. I'm left thinking that these problems are specifically iTunes / Quicktime and will move forward accordingly. Apple has stated that they are working with Microsoft to develop a new version of iTunes that is fully compatible with Vista and I have chosen to wait until that version comes out before installing it again.
    My question is if any of you have experienced issues like this? If you have, do you have any advice or things you did to make it work? Please comment here as I will be watching this post to see your responses.
    My advice is to be very cautious when installing iTunes in Vista, especially with this sort of configuration. I've seen iTunes work fine in Vista before but this is the first time I've worked with a configuration like this. Please be aware of the potential problems. As I've stated earlier, everything else is working perfectly.
    Thanks for your time and sorry for the long post. Have a great day!
    HP PavilionCTO D4790Y   Other OS   Windows Vista Ultimate, 4 gigs of RAM, 256 Meg GeForce 7500LE PCI-X, RAID 1 SATA with 250 gigs

    Thank you for the great responses, guys! This is exactly the kind of feedback I was hoping to get.
    Rain-Man, your post is EXACTLY what I was hoping for. This computer is also running WD drives. I had a feeling that WD might have been some of the issue but it only happened on the SATA RAID config. The computer I set up right behind this PC (on another desk) is EXACTLY the same but does not have a RAID 1 setup and runs perfectly with iTunes.
    Also, there is a Hauppauge TV tuner running in this PC and, in retrospect, I think may be conflicting with codecs. God forbid you would have multiple codecs installed on one PC....
    I'm not going to sit here and bash WD or Hauppauge, but I'm not a big fan of either of these devices. One of the other things that bothers me is that the RAID is controlled by "Intel Matrix" which is the default software RAID controller in this HP product. There isn't any real control in the management console. All you can do is rebuild a failed array or view an existing configuration. That doesn't really say, "AWESOME" to me. Being an HP product I'm assuming this is pretty standard because it was the default software controller installed on this system.
    Any way you look at it, I really appreciate the posts here. I agree that there is an issue that Apple needs to address. WD or not, the fact that people are having problems getting iTunes to work in Vista needs to be resolved. We pay for our music and our shows and our movies and deserve to have them working and not getting deleted, corrupted, or damaged when we try to play them or transfer them. I love the fact that Apple is incorporating new technology into their products but we pay for that technology and it should work.
    If I hadn't backed up my client's iTunes folder I would have lost everything he paid for. He's a pretty cool guy but how would you feel if you lost a couple grand worth of music, TV, and movies? I would be pretty upset.
    In the end, I think RAID or drive configuration on this PC is one of the major issues. It's something to do with the SATA controller and Vista combined with iTunes / Quicktime. I'm not exactly sure how that could be but I believe it's something Apple / Microsoft needs to investigate...
    Please keep the posts coming as I will be checking here regularily for updates. Thanks for your input and I hope we're able to resolve this issue soon.
    Dell 5100C, Toshiba Satellite P25, Custom Build, iMac G5, Dell SC Power Edge   Other OS  
    Dell 5100C, Toshiba Satellite P25, Custom Build, iMac G5, Dell SC Power Edge   Other OS  

  • Window Vista Ultimate Updates - Error 80071A91 and 490

    I can't update Windows Vista because of these errors, and I can't find any info on how to fix them other than buying registry software.  Will this help?  Any ideas?  I have a T61p w/ Windows Vista Ultimate.
    Thank you!

    Quicktime doesn't open either and sends same error message

  • Can't burn cd's using iTunes 7.3 and 64-bit Windows Vista Ultimate

    Every time I try to burn a CD I get the following error:
    "Disc Burner or Software Not Found"
    I have checked Device Manager and no problems with the disc burner there. I've even burned cd's from Windows Media Player(and dvd movies with other programs), but I would prefer using iTunes 7.3 to burn cd's. From reading the discussions it is my understanding that iTunes cd burning functionality doesn't work with 64-bit versions of Windows XP and Windows Vista. Is there a fix for this? Please advise.

    Here's how to get Itunes to work in Vista and XP64 bit:
    Start Menu -> All Programs -> Accessories -> Right Click on Command Prompt -> Run As Administrator.
    Type “cd C:\Windows\SysWOW64″
    Type regsvr32 vbscript.dll
    If you don’t do Run as Administrator, the regsvr32 will fail. Also, be careful to run the command in SysWOW64, not System32! System32 on a 64-bit system actually contains the 64-bit system libraries.

  • Windows Vista Ultimate on iMac 24" Experience

    I wanted to share my experience installing Windows Vista Ultimate on my new iMac 24" with Bootcamp 1.2.
    Background: My iMac is a 2.16 Dual Core with 1GB memory, 128MB of video memory, and bluetooth keyboard and mouse. It has the latest and greatest version of OS X and Bootcamp 1.2.
    Experience: I installed bootcamp with no problems. I followed the setup wizard, creating the windows drive cd, and partitioned my hardrive with ease. I placed the Windows Vista Ultimate dvd in the drive and restarted my Mac. To my suprise, Windows Vista setup loaded recognizing the bluetooth keyboard/mouse and proceeded to install. The installation took about 15 mins.
    Conclusion: I was quite impressed with Vista's speed. When I double clicked the applications they bursted open. The new Aero interface was incredible. The colors were vibrant and bright. I was expecting Vista to run dog slow with the hardware configuration but it was quite the opposite. The configuration was no problem for Vista. I know Vista has the ability to use unused ram dynamically for video so maybe that was it.
    I know some people will get mad but I found myself switching back and forth looking at OS X and Vista. Reason is the speed was noticeably quicker in Vista. I did discover that Vista uses a "prefetch" technology which stores files of the recently used applications. It allows them to load commonly used applications faster.
    Anyway, I thought I would share my experience. Best part was Bootcamp 1.2 and Vista Ultimate (30 days) are free. Back to OS X.

    Compare the price of vista ultimate to tiger, and you might notice something...
    Okay, maybe that version might be beautiful (the graphic art) but all clean and clear, it is still running on a failing foundation, aka windows platform.
    I suppose I would share your opinion on speed when seeing it, but I want to mention that, when I experienced Windows XP with a previous bootcamp version, I also noticed that windows was verrry speedy. A friend of mine installed the same cd of xp on his computer with exactly the same config-specs as mine, only difference was: it was a non-apple machine and mine is (ofcourse).
    Guess what we both experienced, there was no way that the speed was the same, although they both had same configs (and then I mean not only for ram, but every aspect). Don't ask me how that is possible (maybe that, for recognizing mouses and stuff the so called plug and play system of microsoft gets overwritten by the driver from mac you need to install to run windows on mac?) but I know it is just true.
    To me that proves once again that mac is just way better. (and for your information, I've been working with windows for 8 years, until last year July, so I'm not just a un-XP'd anti-microsoft apple fan) but that anti-microsoft might in fact become true.
    And just a little Tiger tumb up;
    Now ofcourse, can't blame you for that because on a desktop you won't see all of that, but have you seen what happens with your battery life of a macbook or macbook pro when running both xp or vista on it? **** man, I have 4 hours battery-life when running os X with "best performance" settings, airport and bluetooth out, mighty mouse with cord (ofcourse, the bluetooth is out), ethernet cable plugged-in, full brightness. When running XP, that changes to 2h 26min, same config. Now, there vista is heavier in a graphical way, you see the battery life under vista shrinking to 2h 01min...

  • Windows vista Ultimate does not recognize ipod

    Hello,
    I have Windows Vista Ultimate and whe I plug my 30GB 5G Ipod it asks for the driver. It does not appear nor on explorer nor itunes.
    I have itunes 7.1.5 installed.
    i did try reseting the ipod but still the same problem.
    I did try my Ipod on an XP computer and it works.
    have anyone solved this compatibility problem or knows how to solve it?

    perhaps try MarkTaylor46's technique from the following post:
    http://discussions.apple.com/thread.jspa?threadID=892874&tstart=15

  • Live! Cam Voice - Microphone compatibility w/ Windows Vista Ultimate

    I recently got the Live! Cam Voice for my computer with Windows Vista Ultimate. And for some reason the built in microphone won't work at all - even the voice recorder, the Yahoo! Messenger in which it was built for and Windows Live Messenger. However the actual webcam works fine. Is there anyway to get the microphone to be compatible with Ultimate?

    HELLO CREATIVE!!!
    CAN YOU MAKE THIS CAMERA USEFUL?
    NEED NEW DRIVER!

Maybe you are looking for

  • Running in Query Mode

    Dear Friend I got this message "FRM-40208: Form running in query-only mode. Cannot change database fields." This happened only when I run the program through the application menu program But when I run the program alone it is not give this message an

  • TS1702 PrintDirect Application Upgrade does not reauthenticate on iPad Air.

    Hi Can anyone assist me please. I purchased the PrintDirect Application for both my iphone 5S and new ipad air, both are running latest IOS software. The app. is downloaded first as a free app, then with purchase of an in-app upgrade to obtain full f

  • Displaying Picture Upsidedown

    Is there any easy way to turn a picture upside down with the LabVIEW Full Development System? I am using LabVIEW as a user interface in a vision research application where we display an preprogrammed image on a remote display and on the front panel.

  • Moved Library to External HD - No Playlists in itunes now

    I have moved my itune library to an external hard drive. itunes finds the music. It plays the music and updates the ipod. I do not have my playlists. I have tried to use consolidate library in itunes. Still no playlists. Is there a way to move the pl

  • 10.1.0.2 to 10.2.0.4

    Hello all, my database version is 10.1.0.2 and i want to upgrade to 10.2.0.4 which is running on windows 2003 server(32 bit), and select * from v$timezone_file; is version:2 so is it possible to upgrade directly from 10.1.0.2 to 10.2.0.4 ? if anybody