Airport can not be activated. Other mac computers in home all function properly using my apple router.

How can I get airport activated?
Software Versions:
  Menu Extra:          6.2.2 (622.2)
  configd plug-in:          6.2.5 (625.6)
  System Profiler:          6.0.1 (601.1)
  Network Preference:          6.2.2 (622.2)
  AirPort Utility:          5.5.3 (553.20)
  IO80211 Family:          3.2 (320.1)
  Interfaces:
en1:
  Card Type:          AirPort Extreme  (0x14E4, 0x8C)
  Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.42.4)
  Locale:          FCC
  Country Code:          X0
  Supported PHY Modes:          802.11 a/b/g/n
  Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
  Wake On Wireless:          Supported
  Status:          Off     I check it ON in airport utility and Nothing happens, airport stays OFF
My other mac computers in home still have wireless contact with my network.

You do realize you don't turn on Airport on your MacBook Pro with Airport Utility???  You actually turn it on on the menu bar.  There should be an icon that looks like a V with a semicircle on top.  Click on that, and turn WiFi on.  Or you can go into System Preferences>Network, click on Wi-Fi on the left hand side, then turn on Wi-Fi. 

Similar Messages

  • Can not connect to other macs on the network.

    Hi,
    I am having an issue with a G5 Tower running 10.5.8 failing to connect to other macs on the network. I try to connect to our xserver and any other mac I get an error message that reads ‘EMSG_CONNECTION_FAILED’.
    Anyone have any ideas?
    Many thanks in advance,
    pvteyes99 

    Turns out the 'node' on the hub had failed completely, ethernet cable was OK.

  • HT1420 how can I authorise more than 5 computers in home sharing?

    How can I authorise more than 5 computers on home sharing?

    Welcome to the Apple Community.
    What are you trying to do, use homesharing with more than 5 computers or authorise more than 5 computers. You can't authorise more than 5 computers.

  • 2 Mac can not see each other via airdrop under the same airport/timecapsule.

    I have 2 iMac in my home with a TImeCapsule (gen4).
    The wifi is on both 2.4G and 5G with the same SSID.
    iMac A is working on 2.4GHz, iMac B is working on 5GHz.
    So they can not see each other via airdrop, meanwhile they can see each other  in the left panel of Finder.app
    Is it a known issue of AirDrop?

    Hi Kirby Zhou,
    Welcome to the Apple Support Communities!
    It sounds like you would like to utilize file sharing between computers, not necessarily AirDrop. Please refer to the attached article for information on the file sharing process. If this is not what you are looking for, please let me know. 
    Share your files with other Mac users - Mac Help
    Best regards,
    Joe

  • My iMac can not see my mini Mac via Airport extreme using host name, only via IP address. What am I doing wrong ?

    I have an iMac and a mini Mac attached to the same Airport extreme. It would appear that Bonjour works because I can see the hostname of the mini Mac server in Finder on the iMac.
    But if I type in the host name (myminimac.private) in the Safari browser at the iMac it can not find the mini mac. However if I type in the IP address of the mini mac server it can see the see it.
    It used to work but I must have done something to mess it up.
    Anybody any suggestions ?

    You have the wrong card. You need the original AirPort card for your G4.
    ...how the **** do i get the Superdrive to open up so i can put in a CD/DVD?
    If the keyboard has a media eject key, press that. If not, hold down F12.

  • I can not connect with pocket mac to my computer

    I can not connect with pocket mac to my computer

    I can not connect with pocket mac to my computer

  • I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x m

    i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x mas and that is tomorrow

    AdaS_VZW,
    I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
    I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
    What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
    I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
    Shawn

  • Interface Manager Material Transaction can not be activated

    Hi hussein,
    One of the interface managers for INVENTORY module can not be activated.
    I tried to activated it using:
    Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
    Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface"
    Then after the job is completed, I checked the manager but it is still "inactive" status. :(
    Its log says:
    +---------------------------------------------------------------------------+
    Inventory: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    INCTCM module: Process transaction interface
    +---------------------------------------------------------------------------+
    Current system time is 07-DEC-2009 14:57:19
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output is not being printed because:
    The print option has been disabled for this report.
    +------------- 1) PRINT   -------------+
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed successfully
    Current system time is 07-DEC-2009 14:57:21
    +---------------------------------------------------------------------------+Please help.....
    Thanks a lot
    msk

    Hi yxes;
    Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
    Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface" Related Cm is Up? If yes please follow below and see its helpful:
    The print option has been disabled for this report.
    Regard
    Helios

  • How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    What OS are you running.. this is usually only a problem in Mavericks.
    If so I recommend you mount the hard disk manually..
    Use Go, Connect to server.
    Type in the IP address if static.. eg
    AFP://10.0.1.1
    Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
    Type in
    AFP://TCname.local Where TCname is replaced with the actual name.
    You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
    Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

  • You can not authorize more than 5 computers

    I have music on my MacBook Pro, in iTunes, that I want to use, but it comes from an old account, that I don't use anymore, and some computers/iPods that are really not working. When I want to ear those musics/songs, I receive this message, when trying to enter the account, old, not the actual one: "you can not authorize more than 5 computers"
    What can I do?

    I quote:
    You can deauthorize all computers connected to your Apple ID if you've reached the maximum five authorizations:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
    (end quote): once done you can then re-authorise computers as needed.

  • HT4623 Dear AppleCare,  My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.  But when I am back in China  using local carrier,  Can not be activated

    >
    >>Dear AppleCare，
    >>My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.
    >>But when I am back in China  using local carrier,  Can not be activated
    >>I can't believe that !
    >>>Details:
    >>>SN:F1*******8GL
    <Personal Information Edited by Host>

    Sorry to tell you this but this is not AppleCare.
    This is a forum of users just like yourself who do their best to help other users.
    We are not able to help you with your problem

  • HT204053 why is my phone number can not be activated for iMessage?

    why is my phone number can not be activated for iMessage?

    Got this from another post.  General>settings>network>reset.  Then try.  Worked for me.  Good luck!

  • Can't see the other Mac on the network

    I have a iMac G5 and a MacBook Pro connected via wirelss at home. Sometimes I can't see the other Mac in the Network folder, however I can connect to the other Mac (even I can't see them in the network folder) by afp the IP address via Safari... I have enabled the "personal file sharing" option in both of the machine.
    Help please.
    Samuel

    Sam,
    I've had the same problems numerous times myself: the other Macs don't show in the network folder. Why? I'm not too sure myself, I've been given several possible explanations by the geniouses in San Francisco. However, the best trick to connect is via the Finder 'Go to' menu. The very last item should say something like "Connect to server..." -which is the same as the 'Command-K' combination of keys. That'll bring up a list of the last few servers on the network, and al you have to do is choose the one you want, and voilà!
    * Guy

  • When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

    When I try to exit a video on the internet I received a screen asking if I was sure I want to leave. It to not have a confirmation tag. But it has prevented Safari from shutting down. Now I can not turn off my Mac? How do I reset?

    What kind of videos are you watching? 
    You need to force quit Safari, but hitting Command-option-esc, and force quit Safari. 

  • HT1267 I have a factory unlocked Iphone 4S, it worked fine but it was lossing the signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later??

    I have a factory unlocked Iphone 4S, it worked fine but it was often lossing  signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?

    yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
    and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
    trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
    no worries

Maybe you are looking for

  • ITunes 7.5 and OSX 10.4.11 - CANNOT CONNECT TO iTUNES STORE

    After a recent upgrade to iTunes 7.5 and OSX 10.4.11, I can no longer connect to the iTunes store. I have tried reinstalling iTunes 7.5 (and Quicktime - just in case!). I have also tried Keychain First Aid. Still it is broken. Please help me with thi

  • PHP Image Gallery with Images placed every other paragraph

    Currently I have multiple images that where uploaded to the details page of Post 1. Every other paragraph I have an image displayed. With say 5 images. What I would like is that the user can click on the image and open up a gallery (on the same page,

  • How to Save Agent Output in Local Disk in OBIEE 11g on linux

    Hi I am using OBIEE 11.1.1.6.2 I want to schedule some reports which will run everyday night and the Output to be saved in my local disk I read this article http://obiee1000.blogspot.in/2012/01/actions-in-agents-part-1.html ...but this solution is on

  • Writing SOAP messages into JMS message

    I have a system that has WSDL "contracts" for messaging, and we want to use a JMS infrastructure to send SOAP messages. From all the clients that I have seen generated they all want to talk HTTP, or use their own way of using JMS. What I would like t

  • How to make a search in a form

    Hi I have a form with a lot of items(name date,age,height) that i can use to make a search . I found many problems for the search , infact i had to create many cursors, one for each case. For example i would search for age and height or just from dat