Airport cant see the network its created

Did the update today...unsure that has anything to do with it, as the problem hapopened before.  Anyway, I've reset a few times - to factory and hot reboot.  Nothing!!!!!!
Help -

If you reset the AirPort to factory defaults, then you'll need to search for a wireless network with a name like Apple Network xxxxxxx to be able to "see" the AirPort Extreme.
There's no security on this network, so no password is required.
You will need to log on to this network first if you want to configure the AirPort device using wireless, then open AirPort Utility to reconfigure the AirPort device.
You can also temporarily connect a spare Ethernet cable from your computer to one of the LAN <-> ports on the Airport Extreme if you want to configure it using a wired connection.
Once the device is re-configured, you can disconnect the Ethernet cable.

Similar Messages

  • G3 recognizes airport card, but cant see the network

    I just bought an Airport Card for my 10.3 400MHz iMac. I plugged it in, it recognized the card, but it isnt seeing my wireless network. Whats going on?

    Did you connect the wire for the antenna to the AirPort card?

  • Setting up the I Pad for the first time I am stuck on the wi fi page it can see the network my pc cant see the i pad

    setting up the i pad for the first time i am stuck on the wi fi page it can see the network but my pc cant see it

    Since you have a modem/router, you must continue to use the Beetel modem/router on your network.
    The Time Capsule can connect to the Beetel modem/router using a wired Ethernet cable connection and produce a separate wireless network.  You would NOT want the Beetel router and Time Capsule to both try to produce the same wireless network if they are located close together, since this will likely create interference problems that may prevent devices from connecting to either the Beetel orTime Capsule wireless network.
    The exception to having the Beetel modem/router and Time Capsule produce the same wireless network would be if you can locate the Time Capsule at least a room or two away from the Beetel modem/router.  An Ethernet cable can be run up to 300+ feet or about 100 meters with no signal loss, so you should be able to locate the Time Capsule anywhere you want.
    Are you able to consider this option?
    Another option.....if you cannot locate the Time Capsule in another room......would be to configure the Time Capsule to use the same wireless network name and password as the Beetel network and turn off the wireless on Bettel modem/router.
    Important.....there is no guarantee that the printer will be able to connect to the Time Capsule wireless network, so you should expect to start over and set up the printer again.
    Yet another option would be to turn off the wireless service on the Time Capsule and use the Beetel wireless to back up your computers to the Time Capsule, which will act as a wired hard drive for the network. If you select this option, the Time Capsule can be located close to the Beetel modem/router.

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

  • I cant see the airplay icon on mi iphone 3gs

    i cant see the icon of airplay on my iphone 3gs i have a iphones 3gs wiht ios 5.1.1 i will like to use the airplay betewm mi iphone 3gs and my itunes on my pc , please help me with this NOTE I dont have a Mac i have PC with W7 but i read that is posible plesase help me , and itunes dont show me the icon , when i had a 3g he show me the icone but i cant see it 

    This is from the "Troubleshooting AirPlay" article:
    Resolution
    If the AirPlay icon doesn't appear
    Check for the AirPlay icon ( ) in the recently used apps section on your iOS device, or in iTunes on your computer (as in these articles about how to use AirPlay and how to use AirPlay Mirroring). The icon will only appear if your device or computer is logged onto a Wi-Fi network which has an AirPlay-enabled recipient, such as Apple TV (2nd generation or 3rd generation).
    If you are still unable to see the AirPlay icon, try one of the following steps:
    Verify that your AirPlay-enabled devices have the most up-to-date software or firmware.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    Verify that all your AirPlay-enabled devices are logged on to the same home Wi-Fi network (check the home network names on your devices to confirm).
    If trying to AirPlay, or AirPlay mirror, to your Apple TV (2nd or 3rd generation), ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay
    Check Internet or network connectivity on all affected devices.
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information). 
    The entire article is at http://support.apple.com/kb/TS4215

  • I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

    I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

    Hi Shlomi
    It worked!!! Thanks so much, I've been messing about with this for hours.
    As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
    Any thoughts you have would be much appriciated
    Rob

  • The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password.  I have an HP laptop

    The power went out and when it returned the network name and password was lost.  I can see the network in my connections and connect to it.  How do I get it back to the orginal name and password? I have an HP laptop. 

    Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
    If this occurs, your only option is re-configure the device again, just as you did originally.
    In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

  • Cant see the native groups on the forms and reports

    We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
    We did the migration for test environment, but didnt encounter this issue.
    For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
    I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
    We brought over the schema, migrate and register the applications, but the problem still persists.
    Has any one encountered issue like this, I would, I would really appreciate any suggestions.
    thanks

    Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
    When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
    Any idea would be highly appreciated.
    thanks

  • Cant see the document canvas just grey background

    CANT SEE THE CANVAS PS4 ?just built a new pc and my ps4 (previous hdd ) runs fine ( so the mob and video card seem all good ). I created a new os on a new hdd and installed ps4 everything seems fine but cant see the canvas , can draw on it but just see the grey backround ( i  can see it creating in the layers pallet). Illustrator works fine ..please help

    If all else fails try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
        A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • TS4006 cant see the device on find my iphone

    cant see the device on find my iphone.
    please help.

    Welcome to the Apple Community Billy
    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • The box I type questions in is black so I cant see the questions I am typing.  I use aol

    the box I type questions in is black so I cant see the questions I am

    This started recently.  I want to say I updated the Apple software.  I have restarted Mac.  And it is only on some sites.  I did some more checking and I think it might be a flaw with the new software.  Its just the boxes on some site like Chase, etc.

  • I registered for itunes account but in the verification mail I cant see the link

    I am trying to creat an itunes account for my friend but in the verification mail I cant see the link.. what can I do to fix it ?

    The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.

  • I want to rest my answer on appstor and i cant see the link to rest it

    i want to rest my answer on appstor and i cant see the link to rest it
    its not giving me the link pls send to me the link to my email        [email protected]
    thanks

    The link can't be sent in any way or made to appear without correctly answering two of the three security questions as documented in this article; if that's not an option, use the link in that article to contact the iTunes Store staff.
    (76579)

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

    I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
    The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!!  I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY! 

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

Maybe you are looking for