Airport Card can not find the Airport Extreme Station

My problem is, that my PowerMac G5 with an Airport Card can not find the Airport Network from the Expreme Station. But I can see all other wlan-networks.
With me MacBook Pro I have no problems, I have an normal connection to the Station.

JanSo wrote:
My problem is, that my PowerMac G5 with an Airport Card can not find the Airport Network from the Expreme Station. But I can see all other wlan-networks.
Welcome to Apple's discussion groups.
In AirPort Utility how is your AirPort Extreme configured in the AirPort panel, Wireless tab, Radio Mode list? If it's set to 802.11n only the AirPort card in your G5 probably doesn't support that.

Similar Messages

Airport utility can not find my airport express...

Airport utility can not find my airport express...
I was trying to connect a PC (Windows XP) laptop to my wireless network via the airport express.
I have a Mac with an airport that I use to get internet in my other room. I am trying to get internet on the laptop too.
I somehow manage to erase my network & now my airport utilities won't even scan/recognize my airport??
ANY help would be appreciated, mac helpline wanted $59 to help & I live in a small northern community where they do not have anyone that will address a Mac issue!!
Thanks for your time.

Thank you SO MUCH Tesserax for taking the time to help!
I powered everything down, slowly powered everything else up from the modem to the airport then the computer. I then reset the airport & rescaned it through utilities. I set up a new network & voila! wireless up & running again.
I am going to try to connect the laptop to the network now.....well, mabey tomorrow night, I've had enough for 1 evening!
I will update....or possibly be begging for more help...we'll see!
Thanks again for your time!

Airport Utility can not find air port extreme base station

I am running XP home on my computer and have an air port extreme base station connected to it wired. I have no problem connecting to the internet yet more times then not the air port utility can not find the base station. On occasion it will find it but most of the time it can not. Rebooting does not help.

I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

My airport utility can't find the airport device.

Everything is connected. I bought the device about eight months ago and have used it successfully to set up wireless networks twice. Now i have a DSL modem, and there was an error that the IP was in use. So i followed some tips online to reset both devices, restart, etc. Currently i have everything connected and plugged in, including with an extra ethernet cable from my laptop to the airport's wan port. However, NOW the airport utility can't find the device and it's just sitting there blinking amber slowly. The modem is all lit up and green and appears to be working. ***? is the airport express broken?

adubatowka14 wrote:
I got the AU to find my AE by connecting them with an ethernet cable.
How are you configuring up the Express once you have AU working with it? Please provide us with what you want/need to have.

My computer can not find the airport device

I think I have tried everything, but my computer does not find the device in utilitys. The problem I have is that I-tunes does not find the speaker that is connected hvis mye airport express. But sometimes it works...
I have connected express to broadband and it is lighting green (my Zeppelin is working just fine with it). But when I start utilitys, does it not find the device.
What options do I have, what can I do different?
Thanks for all help I can get :-)
Mads

Hello
We still have the same problem...
Is there anyone out there who can help?
Thanks
Mads

My computer and phone both can not find the airport wireless connection even though the status light is green whats going on?

I have cox as my internet provider and the last couple weeks i have been having a ton of connection problems. The status light on my airport express is green but my computer is saying the connection is timing out and my phone is having issues connecting to the internet even though it says it is still connected to my wireless network. is it my airport express or something else?

Manually mount the TC in the computer..
In finder use Go/Connect to server.
Type in the name of the TC or its IP address.. I recommend you use all names of SMB standard.. short no spaces and pure alphanumeric. That will give you much less trouble.
So AFP://TCname.local (where you use the TCname replaced with the actual network name of the TC. local is the domain by default.
You can use alternative AFP://TCIPaddress like AFP://10.0.1.1 (default IP of TC as router). This is only useful when the TC has a static IP.
Make sure ipv6 is set to link-local in all the network adapters in the computer and the TC.
Then go to TM preferences and you should see the TC listed as a possible target for TM.
Read Pondini for other issues.
http://pondini.org/TM/Troubleshooting.html
eg C9 about long names.
A1 to get log info from TM
A4 to reset the TM setup.

The airport utility does not find my Airport Extreme. I tried to reset the base, but I can`t make it. What can i do?

The airport utility does not find my Airport Extreme. I tried to reset the base, but I can`t make it. What can i do?

Please perform a Factory Default Reset exactly as follows:
Pull the power plug from the back of the AirPort Extreme (AEBS)
Wait a minute
Hold in the reset button first and continue to hold it in for at least 7-8 more seconds while you simultaneously plug the power back in to the AEBS
Release the reset button after the 7-8 second hold period
Allow 30-45 seconds for the AEBS to restart
Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the AEBS
Open AirPort Utility to see if can now see the AEBS

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

In new iPad 4g, when sim card is not inserted, I can not find the enable 4g tap in the setting-cellular data tap, can some one please tell me if this is normal and if so, then when it appears, thanks

If the SIM is out of your phone, find my phone needs a data connection, so could use wifi - IF in range of a wifi and one that it can join (ie. a known network or one that is wholly open so no login required). Your phone could also simple be turned off, so not findable, or it may have been restored (plugged into iTunes and restored as new) again, making it permanently unfindable. Honestly, for someone stealing an iPhone, this is likely the first thing they do - restore as new and it is theirs forever.
Find my iPhone is tied to the users iCloud account - the find function is part of the iCloud account's services and it communicates with the iCloud servers over a data connection - either wifi or 3G.
Have you set up your iCloud account on your replacement phone, and is it working properly on that phone?

HT1218 where can i find the airport ulitity option in iphone 4s ..

where can i find the airport ulitity option in iphone 4s ..

Right where you find other Apps for the iPhone.....in the App Store.
AirPort Utility on the App Store on iTunes

Mac mini can not find the NAS

In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

My airport utility does not find my airport express device

My airport utility does not find my airport express device

In order for the AirPort Utility on your iOS device to find the Express, both need to be connected to the same Wi-Fi network. By default, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. Can you iOS device find this network?

Airport utility can't find my airport base station

Im trying to set up a wireless internet at home. I have a comcast cable internet connected to motorola sb120 cable modem and I connected an ethernet cable from the modem to my aiport base station. when I open the airport utility in my macbook (also from my iphone 4s) the airport utility can't find the base station. the base station has a solid green ligh on and the modem "llink" light is binking amber. If I connect the ethernet cable frm the modem to my macbook I can get the internet with out any problem ...please help me set up my wireless internet with airport base station. ty.

Suggest that you try the following:
1) Reset the cable modem. There is a reset button on the back or bottom of the device. Check your documentation for the modem for exact details. In general, you press the reset button for a few seconds and then power down the modem completely.
That means pulling the power plug from the back of the modem or the AC wall plug
Leave the modem powered off at least 30 minutes
2) Perform a Factory Default Reset on the AirPort Extreme using the instructions in this document
Resetting an AirPort Base Station or Time Capsule FAQ
3) Then power off the AirPort Extreme
After 30 minutes.....
4) Connect the Ethernet cable from the cable modem to the WAN port (circle icon) on the AirPort Extreme
5) Temporarily, connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme
7) Power up the modem and let it run for 5 minutes by itself
8) Power up the AirPort Extreme the same way
At this point, the AirPort Extreme should be slowly blinking amber
9) Open AirPort Utility (I assume that you have AirPort Utility 6.0) and click on Other Base Stations, then click on the Base Station xxxxxxx representing your AirPort Extreme to start the setup process
AirPort Utility should suggest that you configure the AirPort Extreme to "Create a wireless network". Accept that option and enter the required wireless network name that you want and passwords
Follow any more prompts as required and AirPort Utility should configure the device for you
Wait 25-30 seconds for a green light
10) Disconnect the temporary Ethernet cable from your Mac to the AirPort Extreme
11) Log on to the wireless network that you named during the setup process
12) Report on your results

Computer can not find the wifi internet

Goodmorning,
I have a mac book pro (with lion) and wifi internet at home. All of a sudden my computer can not find my network although it is available and working as an i pad and a mobile are working via this wifi network.
I tried 'create a network' and 'join other network' but it looks like the computer can not find the wifi network. My computer has internet access via cable, but just by plugging in the cable wihtout changing the settings (switching off the wifi).
Any idea what to do ?
Thanks

The Mac on cable uses Ethernet. Wi-Fi uses AirPort. Try and delete your Airport setting and re-enter your configurations again.

VISA Assistant can not find the instrument.

I tried to control Agilent 34970A through RS232,
but the VISA Assistant can not find the instrument,
and there is no respond when I send a command to
the instrument. I am sure that the instrument is
good, and is set to RS232 interface, the cable is
right(verified), and the parameter such as baud
rate is the same as the computer.
(I am using LabVIEW 6.1)
Can anyone give me an explain about my problem?
Thank you very much!

> "VISA Assistant" is the name of a utility that ships with Agilent VISA. I am not sure if it can work with NI-VISA.
Agilent VISA does work with NI-VISA -- provided everything is installed correctly. A user may wish to use both Agilent VISA and NI-VISA together if they have a mix of IO cards. If NI-VISA is present, then Agilent VISA should be installed in the side-by-side mode, and NI-MAX should set the Passport to On. Then LabVIEW will see all the Agilent cards, and Agilent VISA Assistant will see all the NI-Cards. (The last time I tried this though, NI-MAX didn't see the Agilent cards.)
What was not mentioned in the original question is what VISA configuration is being used. If more specifics are provided a more specific answer can be given.
[email protected]

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

Airport Card can not find the Airport Extreme Station

Similar Messages

Maybe you are looking for