Airport Card (Powerbook) not seeing network after Update

Using software update, I updated the Airport file. Somehow it seems to have knobbled my airport card and which now wont recognise my netgear dg834gt modem.
I've been trying to fix this for two days now. grrr.
Is this update for Base stations and Express units only? hmm.
Is it possible there may be a shift in the password access? Maybe I need to reconfigure the router? I am currently trying all possibilities.....
I'm on a Powerbook 1.25 @ 10.3.9 - and have reinstalled the essential system software, but I think this screwed things up even more. My main Admin name has also been changed to 'root' ?
The router seems to be fine, (connected via ethernet right now) but the airport just wont find the network and i'm sitting right next to it -- ??
All was fine before -- but now it sleeps. boo.
Am looking all over all help sites and forums but can find no answers yet -
thanks for any assistance in adv.
J.

Update;
Things are looking v. dodgy for PB. have archived and installed, but still a dead Airport. Can this all have been done by an airport update?! -- hmm. Maybe a full erase & install will help. Maybe its something stoopid I've not done in my Airport network prefs...?
Airport Pref. 1 is set to 'Automatic'
TCP/IP is set to 'DHCP'
Apple talk is 'off'
Proxies -- all are not ticked. (is this correct?) Passive FTP box is ticked.
Am reconfiguring Netgear as should be done - restarting, P.B., etc...
The more this goes on, the more i'm feeling somethings blown up in the ariport card. grrr.
Thnx for any help in adv.
J.

Similar Messages

Powermac G4 AGP Airport card (b) not seeing network

I have a friend who has an older Powermac G4 (with AGP graphics card) that has an installed original Airport Card (b only). he would like to connect to his home network (other newer mac computers and HP printer) wirelessly using the Airport card. He is running Mac OS X 10.4.11 on this computer
because he needs access (only on this computer) to Mac OS Classic, and this version of the operating system is the last version to support
Classic.
The troubleshooting I have done has only resulted in "your Airport card must be bad"
Hopefully, there are other options as well, but I have not yet found them. And, being that this computer is so old, it is also not a frequent or new/hot topic.
Any and all help would be most appreciated. My friend is very ill and trying to get this connection working for his wife before he dies, so time is of the essence.
Thanks in advance for the help,
Marc

Hello,
Is the Router they're trying to connect to maybe 802.11n only? Some have a setting to allow 802.11b/g or not.
Is the Router using WPA2? The 802.11b card can only do WEP or WPA, & the very 1st 802.11b card needed a firmware update to even do WPA.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining the Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Airport card can not see network.

I have recently moved. I had no issues with the my network on my G5. We moved, I bought an Airport Extreme and set it up through Qwest DSL. My G4 laptop, my iphone, my roommates G4 laptop and his dell laptop all successfully see and login into our network just fine. However my G5 doesn't see any network available. Like I said, in our old spot, everything was fine. Any Suggestions? Thanks in advance.
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Current Wireless Network: wireless network not available

I've been experiencing similar difficulties with connecting to my wireless router and dropping signal connections.
It almost seems to be in the same vein as SCSI voodoo. One day it works and another it doesn't.
One thing that seems to reduce the problems is to use only WEP protocol. I have rarely been able to connect using any of the stronger schemes, although my wife and daughter using pro laptops have few problems with connections.
My G5 does not have an external antenna, which I suspect is part of the problem.
Mike

Iphone is not detecting network after updating, i m not able to configure it

my iphone is not detecting network after updating, i m not able to configure it

To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

My iPhone 4 can not find network after updating to 7.0.6

my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

Airport card not seeing networks after IP address clash

Hi - I have a wireless network that works fine, just reset it up again and my two mac laptops connect perfectly well to it, as they always did. The reason I set it up again was that my desktop intel mac pro (my main computer) was giving an error message, that another device on my network had the same IP address as my Airport card, and that it therefore couldn't connect to my wireless network (which has been set up so that the various devices are given their own IP addresses automatically in Bridge Mode). I have never seen this before. I repeatedly tried 'renew DHCP lease' in system preferences - it had no effect so I set up the network again from scratch to see if that would help. Still nothing. The mac pro cannot see either of the two Airport Extremes in my network using airport utility and nor will it connect to the new network when I put in the name and password - again, I have tried repeatedly. The Airport icon in system preferences is orange.
The airport card has never reported any problems and Apple hardware test (as well as the programme that came with Applecare) indicates that it's working normally. There are also no hardware problems with the Mac Pro according to the same tests.
Does anyone on this forum know what I can do to connect the Mac Pro to the wireless network? (I don't have the option of trying to use it as the computer that sets up the network, as it's located a long way from the telephone connection, so that is done using Airport Utility via one of the laptops).

Deleting the keychain with Keychain access worked.
I still can't click on options nor see preferred networks, but now the new keychain I made is finally staying around after reboot and auto connecting me to my home network.
Thank you for the help. I did accidentally delete ALL my keychains, but that's just as well as I probably had other clutter in there as well.

I could not see photos after updated with ios 6(used wi-fi)

I have upgraded with ios 6 on 21-Sep-2012, after that I could not see my photos on my phone 4.
I used apple id for icould buy not able to verify.
thanks,
umapathi

Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi and my device was in sleep mode, I wouldn't get any notifications.
On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
It's not crippling my device but it's really annoying and it's not the way it should behave.

HT4628 I did the security update on 4-2-13 and now my airport card will not turn on. OS 10.6.8 Intel imac 4,1 core duo. My macbook pro did not have this issue and wifi here is working on that. Is there a setting that was changed? Thank you!

Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.

Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update

M93P Tiny - Bios Update - Does not want to boot hdd, usb, cd rom or over network after update
Bios
FBKTB0A
3/31/2015
The bios shows updated and i can go into the bios but the ram amount and frequency does not show rite and it also does not want to boot any of those items.
Please advise.
Thank You

Hello all,
I, too, found this oversight on the part of Lenovo to be quite distressing. It is possible to upgrade the X61 BIOS with a USB thumb drive. I have provided directions at http://ubuntuforums.org/showthread.php?t=817897
The above tutorial is aimed towards Ubuntu Linux users. However, I believe that users of Vista should be able to follow along. Please let me know if you have any questions... the process is simple enough that it should be possible with any OS out there right now.
Mike

My airport card is not picking up a wireless signal?

Hi there,
I just bought an original Apple Airport card for my PowerMac G4 (mirrored doors)(1.25ghz). I installed a brand new D-Link wireless router w/ rangebooster on a PC located in the basement. The airport card is recognized by my mac, but it doesn't see any networks, even when I manually enter the name of the network I created when I installed the router to the PC. I'm wondering if it's not picking up a signal because the PC is located 2 floors below the mac. D-Link customer service say that shouldn't be the problem at all (with the model I have), and that it may be a problem with the installation/configuration of the AirPort card.
Is there a driver/update I should install along with the airport (original) card?
If anyone has any tips/knowledge on this matter, it would be greatly appreciated.
Thank You!

Hi-
You might take a look at the following help site:
http://www.macwireless.com/html/help/index.html
As Forrest mentioned, you may just have a location problem. If so, a booster may be your answer.
The following firmware may help:
http://www.apple.com/support/downloads/airportexpressfirmware611formacosx.html
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

Airport Utility does not see Airport Extreme Base Station

Purchased Airport Extreme yesterday at Apple Store to replace old Netgear Router. Wanted wireless network to work with 2 identical HP Laptops running XP with SP3 and 2 iPod touches, and possible future purchases of iPad 2 and Apple TV. Installed Airport Utility software from CD on Dell Studio running Windows 7. Connected Airport Extreme to cable modem and Dell Studio. Ran Airport Utility software to configure Base Station but it did not recognize the Base Station. Base Station had blinking amber light. Did have internet connectivity on Dell Studio, and wireless internet connectivity on 2 iPod touches, and on one HP Laptop. No wireless internet on other HP Laptop. But wireless internet connection was unsecured and Airport Utility did not see Airport Extreme so could not configure it to make it secure. Contacted Apple Customer support. After 30-40 minutes of attempting several different possible fixes only able to use Airport Utility to configure Airport Extreme remotely, wirelessly, from one HP Laptop, not the Dell Studio that is directly connected to the base station. Now that the base station is configured the network is secure. However, second HP Laptop cannot connect to primary wireless network. I created password protected "Guest" network using Airport Utility, and laptop is able to connect to this Guest network. From reviewing forums am now able to configure Airport Extreme with Airport Utility by using "Configure other" on Dell computer. But utility cannot find device by scanning. Would like to find way to (1) have Airport Utility on Windows 7 Dell see Airport Extreme by scanning and not using "configure other," and (2) have 2nd HP Laptop connect to primary network and not "guest' network. Any assistance would be greatly appreciated. Thanks.

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

Airport Card can not find the Airport Extreme Station

My problem is, that my PowerMac G5 with an Airport Card can not find the Airport Network from the Expreme Station. But I can see all other wlan-networks.
With me MacBook Pro I have no problems, I have an normal connection to the Station.

JanSo wrote:
My problem is, that my PowerMac G5 with an Airport Card can not find the Airport Network from the Expreme Station. But I can see all other wlan-networks.
Welcome to Apple's discussion groups.
In AirPort Utility how is your AirPort Extreme configured in the AirPort panel, Wireless tab, Radio Mode list? If it's set to 802.11n only the AirPort card in your G5 probably doesn't support that.

Airport Card (Powerbook) not seeing network after Update

Similar Messages

Maybe you are looking for