Airport Connection Dropping Off

Has anyone else had trouble with their Airport connection dropping off all of the sudden during a long download or transfering files across the network? If this is a common problem...I hope Apple is working on it.

I am getting the same thing. After starting a transfer of file, after awhile, it will state the wireless network has been change or comprimised (excuse my spelling) and the airport will be disable and enable in a minute. Then the finder stops responding, I cannot force quit out it and must restart the computer.
iMac, 2ghz Intel Core Duo, 2GB DDR2 667mhz, 250 GB HDD   Mac OS X (10.4.5)  

Similar Messages

  • Airport connection dropping off when computer sleeps

    Starting with the latest 10.4.8 update my airport connection drops when the computer goes to sleep. No amount of configuring will get the computer to recognize my airport. Turning off the power to the airport, waiting, and re-connecting does no good. The only way to get wireless is to restart. Once restarted the airport connection is re-established without any configuration and continues to be fine until the computer goes to sleep. Hard wiring ethernet works at all times without problems.

    thanks,
    i read the doc, looked in the system prefs where my re-connect was set to "preferred" and there was only one wpa network listed. i deleted it from the list then re-added per the apple document. will see if this works.
    in my own mind i don't think this is the solution but am keeping an open mind. the weird thing about my situation is that after the computer sleeps there are no available networks under the airport menu. i know in fact there are 4-6 in my area. after restarting the 4-6, including mine, networks are all there and my network has been connected to.

  • Cellular connectivity drops off. Re-booting restores cellular connection for minutes or hours, but eventually drops off again to "NO Service."

    cellular connectivity drops off. Re-booting restores cellular connection for minutes or hours, but eventually drops off again to "NO Service."

    Hi there larsmith2004,
    You may find the troubleshooting steps in the article below helpful if you are experiencing issues with the cellular data connection on your iPad.
    Get help with the cellular data connection on your iPad (Wi-Fi + Cellular Model)
    -Griff W.  

  • Macbook airport connection drops and locks my computer

    So... I think my problem tops them all. Ive done alot of searching and ive found no topic relative to mine.
    - My intel macbook has an airport extreme that can succesfully connect to my schools network or my girlfriends network or my network at home. However...
    Many times a day... as soon as i make my connection active by going on a web browser.
    My Airport drops connection and locks my computer... only the mouse is avaliable, but
    anything else i try to click.. i end up with the spinning beach ball. Only solution i can find
    thus far is to force shutdown my computer and restart... Now i cant do a PRAM reset or
    start up in safe mode. I dont know how to solve this...
    Can anyone help me with this? It is incredibly annoying as i have to force shutdown my computer over 6 times a day which is... bad ... for my computer. More bad clusters.
    Thanks much ... G

    My problem is a variation on yours.
    I don't lose the airport connection at all. I can connect to my Airport Extreme base station and surf the Internet without a any hassle. I can see the other computers connected to said AEBS. Network drives are mountable.
    HOWEVER, as soon as I start to transfer a file or folder from or to a mounted network drive, the transfer hangs. The only solution is to power-off Airport to get the Mac to acknowledge losing connection to the network drive. Otherwise I would continue to stare enlessly at a frozen progress bar.
    Hopefully 10.5.2 will address the issue.

  • Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

    I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site.  Then used web part to show only the  ubsite's reports - using connection to the main list.  Problem is, the connection
    is dropping off and showing all the reports on the main list that are confidential.  this has happened 3 time lately.  Could someone explain why it happens some times?  I had to fix it by adding the web part again and connecting it
    Thanks, Subathy.

    Hi George,
    If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
    lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
    Thanks 
    Daniel Yang
    TechNet Community Support

  • WVC54GCA Wireless connection drops off everyday.

    I have to restart the camera everyday beacuse it looses it wireless connection. I don't have a lenght of time it stays connected. I'm using a Linksys WAP54G connected to a RVS4000 router.  I see others are haveing the same problem.  My laptop stays comnnected so I don't think it is the WAP. 

    You shouldn't have to do this, if you give each camera a fixed IP.
    I have 4 cameras, I'm using one on a cable and the other 3 wirelessly.
    The wireless ones  all drop off and fall asleep at anytime during the day/night, but the one on thr cable doesn't.
    I think, it's a communications/handshaking problem within the wireless network. When the wireless signal fluctuates too much, the cameras don't come back.
    I solve this with a ping to the cameras. The first ping usually comes back dead with 100 % packet loss.
    The second ping may take 3000 ms.
    The third ping usually gets them back to normal, around 2-3 ms.
    All is good after that (for a while).
    I don't seem to have that problem, when the cameras are streaming. Sometimes I get a short break in the stream after a while. I've put this down to heat developing in the camera, but I'm not sure.
    Anyway, Ithink, a static IP is a must for these cameras, if you use them wirelessly.
    Cheers

  • Why does my mac mini wifi connection drop off?

    After an idle period my WiFi connection on the Mac Mini drops off and needs to be clicked on & modem selected to connect back on.
    No other devices on the network are affected in this way. iPhones, PC's, iPad, & android tablets have no problems staying connected.

    Could be due to interference
    Re: 2012 Mini Bluetooth/USB3 Interference
    Wi-Fi and Bluetooth: Potential sources of wireless interference - Apple Support
    http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference

  • MacBook Pro Airport connection drops out

    I have a new and really cool MBP.
    I have a 2 year old Airport Express connected to a Motorola Cable Modem creating my wireless home net.
    I also have a 2 years old iBook G4 with no problem connecting to the airport.
    My new MBP has no problem too when is connected to the AC. BUT when I run my MBP from the battery, the connection drops out randomly.
    It's annoying and I cannot find any helpfull support or working solution at Apple.com nor at the other similar thread on this forum. I've tried some proposed solutions. But none worked more than some minutes (which mean that actually they didn't work).
    I have some questions about all this:
    1) Anybody knows if this is a Hardware or a Software issue?
    2) Apple officially said anything about this problem?
    3) Can I use my purchase warranty in order to demmand a replacement?
    4) Is there any official or unofficial solution that really works?
    Please, help. I think it's very stupid to have a nice and really expensive laptop without real wireless capability,
    Who want a wireless connection if you aren't able to use it when you are not connected to the AC????
    If I was running Vista on Dell or HP laptop I would understand. But on a Mac???
    COME ON APPLE!!!!!
    This is the 2nd BIG problem I am facing with my new MBP since I bought it on July. I am frustrated and tired. First I couldn't use Motion 3 for like a month because of a bad update. Now I realize the wireless capability is crap.
    I have the feeling that the older Apple Computers are better... at least they work!

    I had the same problem on my MacBook Pro for the last month or so after "updating" to 10.4.10. Yesterday I tried Loki's fix but couldn't connect at all after that. So I did an archive/install of 10.4.9 and it works better than ever before. I get full signal and it is a lot snappier and faster. The problem is likely in the 10.4.10 update, hopefully Apple will get that fixed in 10.4.11

  • Airport connection drops under load.

    Hello Community!
    I have some serious Airport connection woes - whenever I heavily use the airport connection it seems to drop out every now and then. The intervals have no visible pattern, but the dropouts are directly linked to the amount of traffic going trough the Airport card.
    The dropping is quickly and the Airport connection icon goes from the full 5 bars to greyed out and back. This happens at an increasing rate when it has happend for the first time after an restart.
    Here's a screencast I took to illustrate the problem: [www.verpeiltaber.net/airport.mov] (Quicktime, 1.30MB)
    It also drops out (invisibly) when I Skype-Out, which is extremely annoying as I pay money for that and then the other side cannot hear me anymore after such a dropout. Strangely it never kills the entire call tough. It never happens when the computer is tethered to a LAN-Cable.
    I have reinstalled Leopard from scratch just two weeks ago. I upgraded from Tiger before and had the problems with that version of the Leopard install aswell. Tiger didn't exhibit the problems - which leads me to believe that this is a software issue.
    The Router is a D-Link 524 with the newest aviable firmware, and has been resetted multiple times. Other computers using the same WLAN work without any hitch.
    This issue has popped up in my office WLAN, which uses a Lucent Router, aswell.
    I'm pulling my hairs out here - help me please!
    Edit: All the latest updates are installed, like the recent Time Machine & Airport update. No third party extensions or mods are installed. The issue is operating-system - wide.

    I have been having the same problem since upgrading to 10.5.2 and it's driving me nuts! Momentary disconnections every 10-15 minutes making messenger, iChat, etc. completely useless.
    I purchased a 15" macbook pro for my partner 2 weeks ago - it's having the exact same issues. I'm thinking of returning the machine as I've tried everything. I have no problems with any other machine connected to my router.

  • Airport Connection 'Drops' on Mac Pro Running 10.5.6

    I have read the many incidents on this forum of Leopard problems / connection inconsistencies via Airport & a a wireless router.
    It has become almost impossible to sort the wheat out from the chaff with regards to solutions for this problem.
    I have tried the following 'solutions':
    Deleting potentially conflicting / out of date preferences,
    Clearing / deleting caches using Onyx,
    Repairing Permissions,
    Creating a new 'location' in Network Preferences,
    Using Open DNS service
    The connection still drops at least once every hour as detailed in my Bug Report (sent via online form) below:
    Any updates on this? Is there a definitive solution, yet?
    I don't have the option to rollback the operating system with Time Machine... my Time Machine drive failed just before this. Fortunately, all of my documents are backed up elsewhere.
    If you need more info, feel free to ask.
    Thank you!
    Bug Report below:
    Hello,
    I have a Mac Pro (profile copied below).
    I'm running Leopard 10.5.6
    This set-up connects to the internet via a Sky (UK) ADSL wi-fi router (only a matter of months old).
    Since upgrading to 10.5.6 I have been experiencing drops in my internet connection every 5 minutes - 1 hour.
    Drops = the airport signal strength signal drops from 5 to 1 or 2 bars [but doesn't drop to no bars] and the connection 'fails' -- i.e. downloads stop, pages fail to load, I can't access e-mail accounts.
    The connection does reinstate itself, but is much more unstable & from that moment drops much more frequently.
    This wasn't happening until I upgraded to 10.5.6
    I have a MacBook Pro (one of the original models) and that experiences no connection problems at all, connecting to the same router (the MacBook Pro is also running 10.5.6)
    This is incredibly frustrating.
    It has rendered my £2500 system useless for work.
    I need a solution, badly.
    On your own support forums, it appears that there are a number of people suffering similar problems.
    Will you please offer a solution / a fix ASAP.
    If you need any more information, please do not hesitate to contact me.
    Many thanks.
    Adam Walton
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 6 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP11.005C.B08
    SMC Version: 1.7f10
    Serial Number: CKxxxxxxxxx
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0
    Current Wireless Network: SKYxxxxx
    Wireless Channel: 1

    I had a similar problem which I've fixed!
    I have four machines here which can connect to my Netgear DG834N via Aiport. (I say can because they normally connect via ethernet.) My MacBook Pro always used to be fine when connected wirelessly but recently, not aware of any changes I've made, it connects for about 10 seconds then disconnects. All other machines are fine and hold the connection.
    This is what I tried before finding my solution:
    1) Deleted all references to the network in the keychain and remade them.
    2) Created another user to try
    3) Changed channels on the router even though I can't see any neighbour's networks.
    4) Made sure computer and router were up to date with firmware/software.
    I'm assuming that it has to be a computer problem as the PowerMac, iMac and iPod Touch have no issues at all. However, the cure was in the router.
    I run with SSID broadcast turned off, WPA2 encryption and MAC address filtering. Allowing broadcast of the SSID cures my problem. Turn it off and the computer connects then drops it ten seconds later. Turn broadcast on and it maintains the connection. I've tried it all afternoon, leaving it connected for about 30 minutes at a time before turning SSID broadcast off again. Works every time! Broadcast SSID - fine, no broadcast - drops after ten seconds.
    Now, if only I knew why! And why only the laptop?

  • Read this if your Airport connection drops

    I just got off the phone with support. I noticed that many other people are having this same issue, where if there is no network traffic, the Airport drops its association to the AP. They are unaware of others having this problem. So, if you're having this problem, you need to call support and tell them, or it's not going to get fixed.
    We troubleshooted for about 30 mins, ran a hardware test, and found nothing. It definitely only happens when there is no network traffic, if I start a continuous ping, the connection never drops. I've tried it on my Airport Express, a Linksys WRT54G, a NetScreen 5GT-Wireless, and an Airespace network. I read on some other forums that MBP users were having the issue, and it seems to have surfaced in 10.4.5, and continues to exist in 10.4.6.
    Bottom line, if you're having the problem, stop posting here and pick up the phone. It won't get fixed unless they create tickets for the issue.

    I think i have figured out the problem between the networking (airport or ethernet) on linksys routers and the macbook. For some reason the macbook only kills the router when it goes on standby or when you shutdown. Think it has to do with the way the new airport card is disconnecting from the router that is causing for the whole router to drop. What i did was check on the box where it says to disconnect from ap before logging off. Which means you also have to set the macbook to log off the user account when it goes on standby that way the airport will properly log off. I think its not an issue related with the atheros card on the new macbooks but with osx itself. Especially considering that when i boot up windows on the macbook the wireless works fine after a shutdown or standby.

  • Airport connection drops when using external monitor

    I just bought a new monitor to use as a 2nd display for my Macbook. Problem is, as soon as I plug it in, my wireless connection just kills over and dies a horrible death, but as soon as I unplug my MiniDisplay to DVI adapter, it works great.
    I've been searching around and there were a few topics on this, but it didn't really look like anyone had a definitive answer for what to do. Some suggested that the DVI cable wasn't shielded and that was causing RF interference, but my DVI cable has the little round plugs at each end.
    Is there any other possibilities to fix this?
    Thanks

    I was having this same problem for quite some time, and several Genius Bar people were not able to diagnose the problem. I checked back from time to time on the net to see if anyone had figured this out, and someone now has. For me, it was as simple as changing the channel option of the airport express from automatic to a manual selection...in my case "6." I've seen a couple posts on this now and some switch from 11 to 6, or vice versa. Mine was set up for automatic selection, so I first manually selected 11. That didn't help, but selecting 6 fixed things immediately. Here's the thread that helped me: http://discussions.apple.com/message.jspa?messageID=11051427
    and since I found it's not that easy if you don't know how, here are directions for changing the channel on your airport express:
    http://forums.macrumors.com/showthread.php?t=379142

  • Airport connection drops about once a day..

    is the problem in my macbook or in my airport?? when i go to look at the airport, the green light is still on. help would be appreciated.
    MacBook   Mac OS X (10.4.8)  

    Hola -
    If you go to your System Preferences/Network/Airport and check the box "Show Airport status in menu bar" you'll be able to see the strength of the signal in your top menu. 4 bars will equal a strong signal. Monitor this throughout the day ...if it's working fine for most of the time then I'd suspect the wireless router as the problem. Also, if the signal is very weak (1-2 bars) then you may indeed lose your connections at times.

  • My Airport connection drops whenever the Mac sleeps or reboots

    My iBook on the same network doesn't do this.
    I guess it's a settingI'venot got right, rather than a fault as such.
    Any ideas?
    Thanks
    iMac Dual Core   Mac OS X (10.4.8)  

    See if you can find a solution in KB 304482, Mac OS X 10.4.8: AirPort does not auto-connect to existing networks after restart or wake from sleep.

  • Airport Express Dropping Off Completely

    I've viewed other posts with similar problems, though I'm still unsure of how to solve my problem specifically.
    I set up and connect my Airport Express, and it'll work fine for about 2 or 2.5 days. Then I'll fire up my PB and notice I won't have a connection. I'll have to reset the Airport Express and cycle through the Setup Assistant. This has happened about 4 times now. At my old place, I never had a problem. My internet connection is fine, and connect without a problem when connecting directly through Ethernet.
    I downloaded iStumbler, and noticed my connection signal is between 55% - 65%. I manually set my channel to 1, far away from others around me (the next closest is 6). I've noticed there are about 3-5 other wireless networks around me, some are always active, others popup sporadically. The highest signal I've seen from others is 40%. I enabled Internet Robustness and have Transmission Power set to 100%.
    I've yet to see how these new settings work out, but should I be changing/altering any other settings? Any info or advice is greatly appreciated. This is the first time I've had problems with my Airport Express in about a year of use.
    PowerBook G4 17"   Mac OS X (10.4.9)   1.67 GHz PowerPC G4

    hi paulimausi,
    i have a similar problem. A new AExpress and i am constantly loosing wireless connection between my AE and my network.
    I also use a linksys router but a 110.
    How much did you reduce you lease time by...i have tried at 5 min!?

Maybe you are looking for

  • OS 10.4.11 and HP Officejet 4500 compatibility issue (scanning)

    Hi there, I am having a compatibility issue with a G4 (OS 10.4.11) and a HP Officejet 4500 (all-in-one). (Sorry if this is a little long, but there are many specs and many attempts listed here). Problem: I cannot scan from the computer (upon opening

  • Add a new table to an existing Print Layout Designer report

    Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales

  • Firefoz tells me to download the latest version of Adobe Flash to see any video. I did and it's still telling me...

    When I opened Firefox today, when I clicked to watch a video, it told me that I needed to upgrade to the latest Adobe Flash which I did. That did not solve the issue. I can watch video on other browsers but not Firefox. What do I do to get Firefox to

  • Customer Ageing - Report Painter

    Hi,    Can any tell whether we can achieve the customized reports for the customer ageing (Txn: S_ALR_870121276) through report painter. If so can i get any help for the steps to be followed /material regarding this. Regards, Nagendra Prasad.J

  • Flex Builder Projects

    Flex Builder does not have an "Open Project" choice on the menu. We'd like to check the flex project into our source code control and share the environment, however we cannot find a way to "open" the project on a machine other than the one it was cre