Airport connection drops about once a day..

is the problem in my macbook or in my airport?? when i go to look at the airport, the green light is still on. help would be appreciated.
MacBook   Mac OS X (10.4.8)  

Hola -
If you go to your System Preferences/Network/Airport and check the box "Show Airport status in menu bar" you'll be able to see the strength of the signal in your top menu. 4 bars will equal a strong signal. Monitor this throughout the day ...if it's working fine for most of the time then I'd suspect the wireless router as the problem. Also, if the signal is very weak (1-2 bars) then you may indeed lose your connections at times.

Similar Messages

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • Airport connection dropping off when computer sleeps

    Starting with the latest 10.4.8 update my airport connection drops when the computer goes to sleep. No amount of configuring will get the computer to recognize my airport. Turning off the power to the airport, waiting, and re-connecting does no good. The only way to get wireless is to restart. Once restarted the airport connection is re-established without any configuration and continues to be fine until the computer goes to sleep. Hard wiring ethernet works at all times without problems.

    thanks,
    i read the doc, looked in the system prefs where my re-connect was set to "preferred" and there was only one wpa network listed. i deleted it from the list then re-added per the apple document. will see if this works.
    in my own mind i don't think this is the solution but am keeping an open mind. the weird thing about my situation is that after the computer sleeps there are no available networks under the airport menu. i know in fact there are 4-6 in my area. after restarting the 4-6, including mine, networks are all there and my network has been connected to.

  • WRT54G dies about once a day

    I have a WRT54G V6 with 1.02.5 firmware. About once a day it stops
    talking to the attached devices, both wireless and wired. They can't
    ping it or connect via HTTP. The WRT54G still has power. This was
    happening about once a month (tolerable) for some time. About a week
    ago, it started happening about once a day, at highly variable times
    of the day.
    Any thoughts on a solution, other than buying a new router.
    Chuck

    I also have this router, ver. 5 and I am having the same issues.  I have a computer wired directly to the router, with 2 other desktops, and a laptop that access it wirelessly.  One of the computers that I'm having the problem with is using a Linksys adapter.  All 3 wireless computers have had problems, and recently the computer that is directly attached to the router has started having problems.
    I tried changing the channel, no luck.  I have not updated the firmware because after looking around, that doesn't seem to help the problem.  It worked fine for 2 years prior.  Here's the kicker that happened today.  One of my computers could access the internet, while one of the others (the one with the linksys adapter) could not.  My wife was steadily working on her laptop, while the desktop that I was working on showed no signal.  I came down to the computer that is directly attached and looked at the DHCP list, and NOTHING is listed.  Even the computer that is directly attached.  Even as I type this, only 1 wireless computer is listed.  My other 2 are not, although they are running, and currently have internet access.
    Sometimes the signal is only lost for a minute or so, and sometimes I have to unplug it.  Just to be clear, I'm not just losing my internet, I am losing my wireless signal all together.  I'm sure its not an issue with walls or floors in the way because I have one of those computers less than 15 feet away in the same room as the router.  I'm also pretty sure that its not an issue with other electronics, because I live in a rural area and my 2 neighbors are over 200 feet from me.
    Here's another strange little tidbit regarding my connection.  If I go to Facebook on one of the wireless computers, that seems to trigger a dropped connection.  I don't think its possible, but I'll throw it out there for some of you smarter than me.  Is it possible that a particular website, or type of website could trigger anything?  I don't think it has anything to do with how much is transmitted, because I can log onto Netflix and watch a movie, and never have a problem.
    I hope Linksys monitors these message boards and can come up with a fix for this one.

  • Time Capsule flashes amber and loses connection at least once a day

    Hello,
    I got my Time Capsule a month ago. I had an old one from 2008 which I gave to a friend, so it was time to upgrade. I have no idea what's going on, but the Time Capsule flashes amber and I lose my Internet connection at least once a day, sometimes two or three times within a few hours.
    Is anyone else experiencing this? Any idea how to fix it?
    If it matters, I'm on a mid-2010 MBP running OS X 10.8.5.
    Thanks!

    You and everyone else.
    https://discussions.apple.com/thread/5140686?tstart=0
    It is not stable firmware.. or has issues .. with some modems.. or is just faulty.. pick one or two choices.
    There is no fix because this is really a bug.

  • Last week Firefox was crashing about once a day, now it has "not responding" after about 5 minutes on any site. Help please??

    Last week Firefox began "crashing" about once a day. Today it started not responding about 5 minutes after I sign in, no matter what site I am on. My son could not do any school work (online program) because it kept freezing. My computer is protected from malware and viruses (supposedly) I've downloaded the latest version of Firefox and ran a scan, nothing shows up. Please help. Thanks!

    Last week Firefox began "crashing" about once a day. Today it started not responding about 5 minutes after I sign in, no matter what site I am on. My son could not do any school work (online program) because it kept freezing. My computer is protected from malware and viruses (supposedly) I've downloaded the latest version of Firefox and ran a scan, nothing shows up. Please help. Thanks!

  • Airport Connection Dropping Off

    Has anyone else had trouble with their Airport connection dropping off all of the sudden during a long download or transfering files across the network? If this is a common problem...I hope Apple is working on it.

    I am getting the same thing. After starting a transfer of file, after awhile, it will state the wireless network has been change or comprimised (excuse my spelling) and the airport will be disable and enable in a minute. Then the finder stops responding, I cannot force quit out it and must restart the computer.
    iMac, 2ghz Intel Core Duo, 2GB DDR2 667mhz, 250 GB HDD   Mac OS X (10.4.5)  

  • Airport Connection 'Drops' on Mac Pro Running 10.5.6

    I have read the many incidents on this forum of Leopard problems / connection inconsistencies via Airport & a a wireless router.
    It has become almost impossible to sort the wheat out from the chaff with regards to solutions for this problem.
    I have tried the following 'solutions':
    Deleting potentially conflicting / out of date preferences,
    Clearing / deleting caches using Onyx,
    Repairing Permissions,
    Creating a new 'location' in Network Preferences,
    Using Open DNS service
    The connection still drops at least once every hour as detailed in my Bug Report (sent via online form) below:
    Any updates on this? Is there a definitive solution, yet?
    I don't have the option to rollback the operating system with Time Machine... my Time Machine drive failed just before this. Fortunately, all of my documents are backed up elsewhere.
    If you need more info, feel free to ask.
    Thank you!
    Bug Report below:
    Hello,
    I have a Mac Pro (profile copied below).
    I'm running Leopard 10.5.6
    This set-up connects to the internet via a Sky (UK) ADSL wi-fi router (only a matter of months old).
    Since upgrading to 10.5.6 I have been experiencing drops in my internet connection every 5 minutes - 1 hour.
    Drops = the airport signal strength signal drops from 5 to 1 or 2 bars [but doesn't drop to no bars] and the connection 'fails' -- i.e. downloads stop, pages fail to load, I can't access e-mail accounts.
    The connection does reinstate itself, but is much more unstable & from that moment drops much more frequently.
    This wasn't happening until I upgraded to 10.5.6
    I have a MacBook Pro (one of the original models) and that experiences no connection problems at all, connecting to the same router (the MacBook Pro is also running 10.5.6)
    This is incredibly frustrating.
    It has rendered my £2500 system useless for work.
    I need a solution, badly.
    On your own support forums, it appears that there are a number of people suffering similar problems.
    Will you please offer a solution / a fix ASAP.
    If you need any more information, please do not hesitate to contact me.
    Many thanks.
    Adam Walton
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 6 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP11.005C.B08
    SMC Version: 1.7f10
    Serial Number: CKxxxxxxxxx
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: Broadcom BCM43xx 1.0
    Current Wireless Network: SKYxxxxx
    Wireless Channel: 1

    I had a similar problem which I've fixed!
    I have four machines here which can connect to my Netgear DG834N via Aiport. (I say can because they normally connect via ethernet.) My MacBook Pro always used to be fine when connected wirelessly but recently, not aware of any changes I've made, it connects for about 10 seconds then disconnects. All other machines are fine and hold the connection.
    This is what I tried before finding my solution:
    1) Deleted all references to the network in the keychain and remade them.
    2) Created another user to try
    3) Changed channels on the router even though I can't see any neighbour's networks.
    4) Made sure computer and router were up to date with firmware/software.
    I'm assuming that it has to be a computer problem as the PowerMac, iMac and iPod Touch have no issues at all. However, the cure was in the router.
    I run with SSID broadcast turned off, WPA2 encryption and MAC address filtering. Allowing broadcast of the SSID cures my problem. Turn it off and the computer connects then drops it ten seconds later. Turn broadcast on and it maintains the connection. I've tried it all afternoon, leaving it connected for about 30 minutes at a time before turning SSID broadcast off again. Works every time! Broadcast SSID - fine, no broadcast - drops after ten seconds.
    Now, if only I knew why! And why only the laptop?

  • Macbook airport connection drops and locks my computer

    So... I think my problem tops them all. Ive done alot of searching and ive found no topic relative to mine.
    - My intel macbook has an airport extreme that can succesfully connect to my schools network or my girlfriends network or my network at home. However...
    Many times a day... as soon as i make my connection active by going on a web browser.
    My Airport drops connection and locks my computer... only the mouse is avaliable, but
    anything else i try to click.. i end up with the spinning beach ball. Only solution i can find
    thus far is to force shutdown my computer and restart... Now i cant do a PRAM reset or
    start up in safe mode. I dont know how to solve this...
    Can anyone help me with this? It is incredibly annoying as i have to force shutdown my computer over 6 times a day which is... bad ... for my computer. More bad clusters.
    Thanks much ... G

    My problem is a variation on yours.
    I don't lose the airport connection at all. I can connect to my Airport Extreme base station and surf the Internet without a any hassle. I can see the other computers connected to said AEBS. Network drives are mountable.
    HOWEVER, as soon as I start to transfer a file or folder from or to a mounted network drive, the transfer hangs. The only solution is to power-off Airport to get the Mac to acknowledge losing connection to the network drive. Otherwise I would continue to stare enlessly at a frozen progress bar.
    Hopefully 10.5.2 will address the issue.

  • MacBook Pro Airport connection drops out

    I have a new and really cool MBP.
    I have a 2 year old Airport Express connected to a Motorola Cable Modem creating my wireless home net.
    I also have a 2 years old iBook G4 with no problem connecting to the airport.
    My new MBP has no problem too when is connected to the AC. BUT when I run my MBP from the battery, the connection drops out randomly.
    It's annoying and I cannot find any helpfull support or working solution at Apple.com nor at the other similar thread on this forum. I've tried some proposed solutions. But none worked more than some minutes (which mean that actually they didn't work).
    I have some questions about all this:
    1) Anybody knows if this is a Hardware or a Software issue?
    2) Apple officially said anything about this problem?
    3) Can I use my purchase warranty in order to demmand a replacement?
    4) Is there any official or unofficial solution that really works?
    Please, help. I think it's very stupid to have a nice and really expensive laptop without real wireless capability,
    Who want a wireless connection if you aren't able to use it when you are not connected to the AC????
    If I was running Vista on Dell or HP laptop I would understand. But on a Mac???
    COME ON APPLE!!!!!
    This is the 2nd BIG problem I am facing with my new MBP since I bought it on July. I am frustrated and tired. First I couldn't use Motion 3 for like a month because of a bad update. Now I realize the wireless capability is crap.
    I have the feeling that the older Apple Computers are better... at least they work!

    I had the same problem on my MacBook Pro for the last month or so after "updating" to 10.4.10. Yesterday I tried Loki's fix but couldn't connect at all after that. So I did an archive/install of 10.4.9 and it works better than ever before. I get full signal and it is a lot snappier and faster. The problem is likely in the 10.4.10 update, hopefully Apple will get that fixed in 10.4.11

  • Airport connection drops under load.

    Hello Community!
    I have some serious Airport connection woes - whenever I heavily use the airport connection it seems to drop out every now and then. The intervals have no visible pattern, but the dropouts are directly linked to the amount of traffic going trough the Airport card.
    The dropping is quickly and the Airport connection icon goes from the full 5 bars to greyed out and back. This happens at an increasing rate when it has happend for the first time after an restart.
    Here's a screencast I took to illustrate the problem: [www.verpeiltaber.net/airport.mov] (Quicktime, 1.30MB)
    It also drops out (invisibly) when I Skype-Out, which is extremely annoying as I pay money for that and then the other side cannot hear me anymore after such a dropout. Strangely it never kills the entire call tough. It never happens when the computer is tethered to a LAN-Cable.
    I have reinstalled Leopard from scratch just two weeks ago. I upgraded from Tiger before and had the problems with that version of the Leopard install aswell. Tiger didn't exhibit the problems - which leads me to believe that this is a software issue.
    The Router is a D-Link 524 with the newest aviable firmware, and has been resetted multiple times. Other computers using the same WLAN work without any hitch.
    This issue has popped up in my office WLAN, which uses a Lucent Router, aswell.
    I'm pulling my hairs out here - help me please!
    Edit: All the latest updates are installed, like the recent Time Machine & Airport update. No third party extensions or mods are installed. The issue is operating-system - wide.

    I have been having the same problem since upgrading to 10.5.2 and it's driving me nuts! Momentary disconnections every 10-15 minutes making messenger, iChat, etc. completely useless.
    I purchased a 15" macbook pro for my partner 2 weeks ago - it's having the exact same issues. I'm thinking of returning the machine as I've tried everything. I have no problems with any other machine connected to my router.

  • Read this if your Airport connection drops

    I just got off the phone with support. I noticed that many other people are having this same issue, where if there is no network traffic, the Airport drops its association to the AP. They are unaware of others having this problem. So, if you're having this problem, you need to call support and tell them, or it's not going to get fixed.
    We troubleshooted for about 30 mins, ran a hardware test, and found nothing. It definitely only happens when there is no network traffic, if I start a continuous ping, the connection never drops. I've tried it on my Airport Express, a Linksys WRT54G, a NetScreen 5GT-Wireless, and an Airespace network. I read on some other forums that MBP users were having the issue, and it seems to have surfaced in 10.4.5, and continues to exist in 10.4.6.
    Bottom line, if you're having the problem, stop posting here and pick up the phone. It won't get fixed unless they create tickets for the issue.

    I think i have figured out the problem between the networking (airport or ethernet) on linksys routers and the macbook. For some reason the macbook only kills the router when it goes on standby or when you shutdown. Think it has to do with the way the new airport card is disconnecting from the router that is causing for the whole router to drop. What i did was check on the box where it says to disconnect from ap before logging off. Which means you also have to set the macbook to log off the user account when it goes on standby that way the airport will properly log off. I think its not an issue related with the atheros card on the new macbooks but with osx itself. Especially considering that when i boot up windows on the macbook the wireless works fine after a shutdown or standby.

  • Connection drops 10+ times a day...

    Hey, i have been with BT for over 5 months now and over the las month my connection has been dropping no less than 10 times a day. 
    Every time i looses connection i reset the modem, such a pain there has to be a reason. what should i check?
    i have BT Total Broadband Option 3.
    These are my stats, Could anyone help?

    welcome to the forum
    are you connected directly to the NTE5 master or test socket or to somewhere else? Do you have any phone extension sockets in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Airport connection drops when using external monitor

    I just bought a new monitor to use as a 2nd display for my Macbook. Problem is, as soon as I plug it in, my wireless connection just kills over and dies a horrible death, but as soon as I unplug my MiniDisplay to DVI adapter, it works great.
    I've been searching around and there were a few topics on this, but it didn't really look like anyone had a definitive answer for what to do. Some suggested that the DVI cable wasn't shielded and that was causing RF interference, but my DVI cable has the little round plugs at each end.
    Is there any other possibilities to fix this?
    Thanks

    I was having this same problem for quite some time, and several Genius Bar people were not able to diagnose the problem. I checked back from time to time on the net to see if anyone had figured this out, and someone now has. For me, it was as simple as changing the channel option of the airport express from automatic to a manual selection...in my case "6." I've seen a couple posts on this now and some switch from 11 to 6, or vice versa. Mine was set up for automatic selection, so I first manually selected 11. That didn't help, but selecting 6 fixed things immediately. Here's the thread that helped me: http://discussions.apple.com/message.jspa?messageID=11051427
    and since I found it's not that easy if you don't know how, here are directions for changing the channel on your airport express:
    http://forums.macrumors.com/showthread.php?t=379142

  • My Airport connection drops whenever the Mac sleeps or reboots

    My iBook on the same network doesn't do this.
    I guess it's a settingI'venot got right, rather than a fault as such.
    Any ideas?
    Thanks
    iMac Dual Core   Mac OS X (10.4.8)  

    See if you can find a solution in KB 304482, Mac OS X 10.4.8: AirPort does not auto-connect to existing networks after restart or wake from sleep.

Maybe you are looking for

  • Trying to connect to Oracle using Web App

    Hi Guys, I'm hoping someone here can help. This question goes out to anyone who has tried to connect to an Oracle database via web application written using Java Server Pages and Servlets. There is a specific file called the context.xml that contains

  • Error Compiliing:symbol  : class TextFileInput

    Greetings, I have two computers with the java compiler installed. On one, the program works perfect. On the other computer, it doent. Here is the error message I get when I compile the program: symbol : class TextFileInput location: class Project1   

  • Including a Frame in a web based Applet

    Hopefully a simple question is it possible to have a Frame in a Web based Applet, i need to have a canvas in the center with other components having to contribute before redrawing the canvas. Also is there a cos and sin and round fuction available as

  • Print formatted letter

    Hi, We have a form with a few text area fields. This is basically the information that we want to send to our customers. we don't want to save this information. All we want to do is let the user enter the information and then allow them to view the f

  • ITunes doesn't even start

    i installed a fresh copy of itunes 7 and it crashes before it even starts. i tried to uninstall quicktime and reinstall it and it still doesnt work. anyone have any ideas?