Airport connection to third party AP (3Com) problem (x-posting)

Hello,
I have the following problem. My home networking equipment consists of an ADSL router (with DHCP server enabled) and a separate wireless Access Point (3Com OfficeConnect).
Two windows laptops and my powerbook connect on this network. Connectivity is fine when connected to the ethernet outlets, and/or the AP is set to no authentication. However, when the AP is set to WEP 128-bit authentication, the windows laptops work fine, but the powerbook fails to get an IP from the DHCP server. In other words, airport connects fine, it seems to accept the WEP key, signal strength is excellent, but it can't get an IP address and reverts to self-assigned IP. As soon as I disable encryption on the AP, it gets a DHCP-provided address. When I re-enable security and restart the AP, same problem.
Note that the DHCP server is not on the AP.
Any ideas? I'm inclined to just leave the wireless network unencrypted and use MAC lists for security....
Thanks

There probably ins't anything wrong with the connection itself.
It is the access to said Network, I am sure your problem can be fixed by careful reading and impamintation.
http://docs.info.apple.com/article.html?artnum=106250
Don

Similar Messages

  • Error 1073807302 while connecting a third party USB device,and showing invalid setup

    While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk in pipe and in VIEW ATTRIBUTE Tab it is showing invalid property....
    please kindly reply me.....!!!

    sir,without configuring in NI-MAX how can we open a connection to VISA.
    If i install the device driver provided by supplier,i am not able to view my device in NI-MAX,so that, I had created and installed .inf file for my device using VISA driver wizard, In NI-MAX now I can see my device and its properties in visa interactive control.But it was showing some errors(Error-1073676418,error-1073807302,error-1073807298),in the USB settings Tab it is showing, "No pipe present in Bulk In-pipe", and in VIEW ATTRIBUTE Tab it is showing invalid property.In program it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,
    While Searching in ni.com, some one posted that change the USB Alternate settings to 1/2/3,default value is 0,but now also my problem is not solved.
    I am using VIATOR USB HART modem, Model 010031.

  • Airport Extreme and third party wireless routers

    I have a dual-band Airport Extreme that works well with all of my newer Macs. I have older laptops, however, with PCMCIA wireless cards that can't do WPA2-Personal security, only WEP. My only solution has been to set up a Guest network with no security. Is it possible to connect a third-party wireless router to the Airport Extreme that offers WEP security?

    Are you trying to setup the Belkin router to use the same wireless network name as the AirPort Extreme network?
    That would require that that the Belkin's network use the same security.
    If this is the case, try setting up the Belkin with a different wireless network name. Unless the Belkin is really limited in features, you should be able to choose the type of wireless security to be used on this Belkin network.
    If you can do this, "point" your WEP device at the wireless network that the Belkin is producing and the signal will bridge when it reaches the AirPort Extreme.
    Regading your question about connecting a router to the ethernet port on a computer that is already setup for Internet Sharing...this is not likely to work. I very much doubt that you would be able to get an Internet connection with this type of setup.
    Message was edited by: Bob Timmons

  • ABAP source code to connect to third party systems using web service calls?

    Hi all,
              can any one provide an example ABAP source code to connect to third party systems using web service calls? The base system is CRM.

    Do you want to call a web service in a remote system, or do you want to provide a web service?
    If you want to call a web service you should create a proxy object via SE80. Open your development package, right click on the tree entry and choose: Create -> Enterprise Service / Web Service -> Proxy Object and provide the needed information (including the WSDL description file). You may then use the proxy object to call the web service (if the connection and everything else works right).
    See [http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm]

  • Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    does PI need a direct connection to third party or can work with a proxy server based connection to third party?

    Hi,
    It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
                                                                    I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
    Regards-
    Anuj Nogja

  • Connecting to third-party router, but unable to browse or e-mail

    I am using an Airport Extreme card in my PowerBook G4 running firmware version 405.1 (3.90.34.0.p18). Our office Wi-Fi access is through a third-party router. We used to use MAC address filtering, and I had no problem accessing the network.
    Recently, for reasons unclear to me, our IT director ditched the MAC address filtering in favor of the WPA-personal standard. I was able to enter the encryption key and get connected to the network, but I wasn't able to get my browser to access the internet, nor send or receive e-mail traffic.
    Our IT folks temporarily disabled all security and restarted the wireless router, but I was still only able to connect to the router, and not use my browser or e-mail, so it doesn't seem to be a problem with the use of WPA per se. I tried temporarily turning off my own firewall, too, but the problem remained.
    Oddly, I can open up the Terminal and Ping successfully to an outside address -- only http and e-mail traffic seems to be blocked. The Windows-based PCs seem to be able to connect to the wireless network and use their browsers to access the internet without any problem. Any thoughts as to what else I might try, or have the IT administrators try, to resolve the problem?
    Thanks,
    Sid

    Hello kilgores. Welcome to the Apple Discussions!
    Something to ask your IT staff is if they use a proxy server for Internet access. If so, do they require proxy configuration scripts (.pac) to provide access to the Internet through your company's firewall. This information would normally be added to your browser's settings.
    For Safari: Preferences... > Advanced > Proxies > Change Settings... > Automatic Proxy Configuration

  • Configuration of AirPort Extreme Using Third Party LAN Ethernet Adapter?

    Hello;
    I am trying to set up my own wireless connection, not without great consternation. Any help would be greatly appreciated. Here is my current situation:
    Subscribed to DSL service - installation went well, and it works fine on two other computers (that are not wireless). Installed same in computer that will use airport extreme, and it shows a connection, but won't load the browser pages.
    Airport Extreme Base Station is working, software installed, etc., but computer doesn't offer airport as a connection choice in system preferences, internet connect, Airport set-up assistant, etc. (because there's no airport card installed????). Consequently, I can't finish w/airport set-up assistant.
    I'm using a third party LAN ethernet wireless adapter since I was told airport cards for my G-4 are no longer made. Adapter and software installed, and shown to be working.
    What am I missing?
    Thanks
    KAS
    PowerMac G-4   Mac OS X (10.3.9)  
    PowerMac G-4   Mac OS X (10.3.9)  

    Hello Duane
    Thank you for your warm welcome and quick response. I will try the AirPort Admin Utility. Your help is greatly appreciated!
    -K
    PowerMac G-4   Mac OS X (10.3.9)  

  • Connections with third-party source control - will they be retained?

    I have RoboHelp installed on my hard drive. Company is swapping out my hard drive and I will need to reinstall it.
    All my RH projects are connected to a third-party source control mechanism (Visual SourceSafe).
    When I reinstall RH, will the connections to Visual SourceSafe be retained for all my projects?

    Hi,
    Just getting the latest version should work. I had a similar problem after a crash. RoboHelp can't detect which projects are in the VSS database, but after getting them, it all worked fine.
    You may however still want to backup your projects on a removable media to be sure. After the reinstall, just make sure the VSS client in installed, copy your project from the media and get back to work -- Could it be that simple? Well, it was for me.
    Greet,
    Willam

  • How to connect to third party using PI for outbound and inbound interfaces

    Hello,
    I have scenarios where I have data coming in from third party EDI subsystem and sent to SAP. And also from SAP to EDI subsystem. We need to send the XMLs to the EDI subsystema nd also receive XMLs.
    Can someone please suggest the ways I can connect to EDI subsytem for both Outbound and Inbound interfaces.
    Thanks

    Hi Prabhu,
    EDI file is different from the normal flat or xml file. Hope you understand the difference.
    Now if your EDI subsytem has the capability of converting the xml file to edi file viceversa then create and receive the xml file from the EDI subsystem. For the xml file you may use the file adapter as an option.
    If it doesnot have the capability then seeburger adapter needs to  be used. This is not an inbuilt adapter. So your company needs to purchase it.
    Regards,
    ---Satish

  • Third party in my problem system launch daemons

    I read in another post that if I had third party links in my problem system launch daemons section, then I had a problem.  I have ftp-proxy.plist listed under that section.  This is my etrecheck report.
    Hardware Information:
              iMac (27-inch, Mid 2011)
              iMac - model: iMac12,2
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              4 GB RAM
    Video Information:
              AMD Radeon HD 6770M - VRAM: 512 MB
    System Software:
              Mac OS X 10.7.5 (11G63) - Uptime: 2 days 1:48:13
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (459.17 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Internal Memory Card Reader
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple, Inc. iMac
    Kernel Extensions:
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    Problem System Launch Daemons:
              [System] ftp-proxy.plist 3rd-Party support link
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              Spotify
              NETGEARGenie
    Internet Plug-ins:
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.1
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Audio Plug-ins:
              iSightAudio: Version: 7.7.1 - SDK 10.7
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    3rd Party Preference Panes:
              Carbonite  3rd-Party support link
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   1%          NETGEARGenie
                   1%          Finder
                   1%          NETGEARGenieDaemon
    Top Processes by Memory:
              254 MB          WebProcess
              225 MB          Safari
              197 MB          Deskjet_3050A_J611_series__144729_
              147 MB          PhotoStreamAgent
              139 MB          mds
    Virtual Memory Information:
              348 MB          Free RAM
              1.87 GB          Active RAM
              586 MB          Inactive RAM
              1.21 GB          Wired RAM
              2.56 GB          Page-ins
              1.59 GB          Page-outs
    Any Input?  Thanks.

    Symptom:  You have a very large number of pageouts for having been up for only 2 days since your last boot.  that averages out to 2 pageouts per minute, and since you most likely are not using your Mac 24/7, you most likely had some very high pageout rates while you were using your Mac.
    A high pageout rate generally results in slow performance.
    Why you have a high pageout rate is unknown, but you should look for memory hungry apps.  Activity Monitor can help there.
    Carbonite can add to your disk contention if it is doing backups while you are using your system.  If it is doing backup during the middle of the night while you are sleeping, that is not an issue.
    You could consider either running fewer memory hungry apps concurrently, or adding more RAM to your system (Crucial.com and MacSales.com are highly respected RAM vendors by this and other Mac related forums).
    If you suspect 3rd party additions affecting your performance, you could boot in "Safe Mode" which will not load 3rd party stuff during boot and login.  Boot holding the "Shift" key to enter Safe Mode.
    You could also run 'sar -g' to monitor your pageout activity over time both in "Safe Mode" and booted normally
    Applications -> Utilities -> Terminal
    sar -g 60 100
    which will report your pageouts once a minute for 100 minutes (adjust the numbers to suit your tastes).  Now use your system as you normally would, and go back and review the sar output when you notice you are experiencing performance issues.  What you really want to see is mostly zeros, with an occasional blip of a few pageouts.  Sustained pageouts or huge runs of high pageout numbers is an indication that you are using more RAM than you have available and should look for why, and if the app you are running really does need lots of RAM, then think about buying more.

  • ESR connectivity with third party systems

    Hi all
    As given in the documents related to PI 7.1. Services from SAP CE and SAP PI can be configured into ESR. Is it possible to configure a webservice hosted by third party into ESR and any guidlines present for the same. Any pointers will be helpful.
    Thnaks a lot
    Manohar.

    Hi,
    Ok, i think that should be no problem, it may seem confusing but in fact the ESR is just a kind of Design Repository where Service Definitions without any context to a concret system are stored.
    The Service Registry (which i think you are looking for) is another thing, you can publish Service Defintions also
    from the ESR or the Integration Directory into the Service Registry, but i don't think that is necessary in the usage you like to achieve.
    You can do that "directly" by publishing it either with the UDDI Api or on the web interface of the service registry
    which lays under the url <host>:<port>/sr (see tab publish) or this blog:
    /people/bv.pillai/blog/2007/11/12/new-service-registry-ui-in-nwce-netweaver-composition-environment-71--sp3
    Here' s some information on the Service Registry:
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/b4ca147d2952f5e10000000a1553f7/content.htm
    And this document also contents the relation between ESR (Enterprise Service Repository) and SR (Service Registry):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0301486-758c-2a10-9d84-a195556df422
    With best regards
                         Sebastian

  • Connecting to third party software from R/3

    Hi Interface Gurus,
    I have to communicate with a software program lying on AS400(i series) system from R/3. Please let me know the process i need to follow to talk to this software.
    It would be of help if you can suggest how and what are the settings and steps i need to take to make a RFC call to this program from R/3.
    Thanks in advance
    Rupendra

    Hi Rupendra,
        In order to communicate with a third party software, you need to establish a connection first and then it can send and receive the messages.
    For all these settings to be done you need to contact your Basis person, who will setup the RFC destination and sender details and other basic needs.
    Hope it helps!!!!
    Do not forget to assign points, if helpful.
    Amit

  • Connecting a third party router to accompany actiontec router?

    So I'm thinking about ordering a second router but I don't want to replace the actiontec router that Verizon supplied me, only because I don't have any clue what to do with my STB's so I'm going to leave the Actiontec specifically for that reason. I have the exact same setup with this exact router at my father's house and nothing seems to have gone wrong. Except that we hooked up an extra room specifically for the third party router. This time, I have nowhere for that to happen, so I was thinking about buying a moca bridge and plugging it in to an existing coaxial jack which another STB is plugged into. If I did this with the new router and simply gave only the one STB internet connection via Ethernet through the third party router, and left the rest on the actiontec, would it still work without messing anything up? Thank you.
    Solved!
    Go to Solution.

    I'm not exactly clear what it is you want to accomplish, but if I understand correctly that you want to have an Ethernet connection for a single device in another part of your house, a part of the house where there's an existing coax feed, then a MoCA adapater should do the trick for you.
    If indeed you're just trying to get that single Ethernet connection you won't need another router.  You can plug the Ethernet device directly into the output of the MoCA adapter.
    If you need more than one Ethernet connection after the MoCA adapter what you can use is a simple and inexpensive Ethernet switch.  Again, you don't need another router.
    The only case I can envision for needing a second router in your situaiton is if you want to use it to extend WiFi coverage, but just  for Ethernet connection(s) a second router is not needed and may be counter productive.

  • BIW connect to third party tool

    Dear All,
    Can anyone tell me that how i connect my BIW with the third party tool to transfer the data using the open hub services of the BIW . In that i requires a RFC connection but how i create this RFC.
    what are the things which we have mention in the system when we create the RFC.
    Thanks in Advance,
    Nitesh

    Crating RFC @ source
    In  SM59 in BW or R/3 System
    1. Enter RFC Destination as (name)
    2. Connection Type as 3
    3. Enter Target Host as (ur host name)
    4. System number as (ur sys no)
    There will be 3 Tabs available
    Give Login Details , Client , User , Password in one tab.
    Select the Logon Security Tab
    1. Enter Language as EN
    2. Client as (client)
    3. User Name as (username)
    4. Enter your BW system Password.
    You Please go through these
    [ Procedure for creation|http://help.sap.com/saphelp_nw04s/helpdata/en/da/11df3a9b10355ae10000000a11405a/content.htm]
    [Document for creating RFC in more detailed graphical way |http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc]
    Once you read the following and document  on creating source system,Most of teh doubts will be cleared :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm

  • Connecting to third party JMS Queue using Patchbay

    Hi All,
    We are trying to connect to a third party JMS queue configured in a remote weblogic server using ATG patcbay. We have configured the provider in dynamoMessagingSystem.xml and created a InitialContextFactory and provided all the queue configurations.
    When it tries to initializes it is trying to create a dynamic queue and saying that JMSHelper class is not configured so that it cannot create the queue (The queue exists in the remote server). When we given configurations based on the details available under C:\ATG\ATG10.0.3\WebLogic\JMSProvider, it is saying that we have to provide a TopicConnectionFactory (We dont need to use any Topics). If we provide TopicConnectionFactory then it will say that your connection factory don't have any Topics configured.
    I have read that for configuring with your application server's queue, this will try creating dynamic queues, but nowhere it is mentioned that how it will differentiate it is a third party queue or an application server queue.
    In our case the application server and the remote server which acts as queue server are Weblogic.
    Not sure why this is behaving like this and there is no proper documentation available in ATG that how to configure the third party queues using Patchbay.
    Any pointers regarding this would be of great help.
    Thanks,
    R.

    Hello kilgores. Welcome to the Apple Discussions!
    Something to ask your IT staff is if they use a proxy server for Internet access. If so, do they require proxy configuration scripts (.pac) to provide access to the Internet through your company's firewall. This information would normally be added to your browser's settings.
    For Safari: Preferences... > Advanced > Proxies > Change Settings... > Automatic Proxy Configuration

Maybe you are looking for