Airport Disk content does not show in finder?

hi,
i notiiced something strange when opening my airport Extreme connected External HD (LaCie Porsche) on my iBook: all the folders are shown for like 1/2 and then all the content becomes invisible from the finder.
Any similar experience and tips?
Tenks for all

Hi, I currently have excatly the same problem...
Can anyone out there help???!
Simon

Similar Messages

Airport Disk Utility does not show up as icon on menu bar

Since I upgraded to Leopard, the icon for Airport Disk Utility which used to appear in the menu bar at the top of the screen has gone away. Any ideas please? Perhaps it's a coincidence but after the install of Leopard, the Airport Disk Utility application disappeared! I reinstalled it from the Airport Express Base Station SW and it has appeared in Applications again. I can start it up, select 'Show Airport Disks in the Menu Bar' but they don't appear ...
Any ideas please?

I believe the disk Utility is now incorporated under FINDER/ SHARED / Airport network name. There should be an ejection/mount arrow beside the disk name. In my case I have two USB disks attached 1: "My Book" [NSTF format, 2: G-DRIVE [MAC format]. The "My Book" always mounted automatically but the"G-DRIVE" would not.
The work around was to
1. Connect the G-DRIVE with a wire directly to your computer [I used the firewire]. It will mount and give you an icon under FINDER/DEVICES. The hard drive was actively working on something for about 2 minutes (you could hear it).
2. After the G-DRIVE hard drive stopped making noise. I Ejected it with the arrow beside the Disk name in the DEVICES Section.
3. Then I plugged the G-DRIVE back into the Hub connected to the single Airport Extreme USB connection.
4. Now both Hard Drives showed up under SHARED /Network name With the Eject arrow beside them.
5. I verified there use by transferring a file and using Backup 3.1.2 (ver374) to backup my documents to the G-DRIVE hard drive.
Note: I had to go this once when I installed Leopard 10.5 and had to do it again when IK upgraded to 10.5.1
Hope this helps

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
To get all your content off your connect your iPad to your new computer.
Then use a 3rd party piece of software to transfer your content
I have found Senuti useful but there are others listed in the article I linked to in a previous post.
https://discussions.apple.com/docs/DOC-3991
That will let you transfer your non purchased content
For Purchased content log in to iTunes on the new computer
In Itunes Store click on Purchased under the Quick Links section on the right.
Download any music by clicking on the cloud button

HT201737 how do you close a thumb drive that does not show in finder?

How do you close a thumb drive that does not show in finder?

What do you mean by "Close?"
Eject??
If so, you could use Go to Computer to find it if it is not in the Sidebar or on the Desktop. Ctrl-click or Right-click on the drive and choose Eject <diskname>
Or, you could set it to show in the SideBar in the Finder Preferences, SideBar tab. Then, it would have an eject icon next to it in the Sidebar.

AE shows WD External disk in Utility, does not show in Finder

Hi,
I just bought an AE (802.11n). The setup was relatively easy. I updated both the software Airport Utility (5.3.2) and Firmware (7.3.2).
When I connect my freshly formatted (HFS+ Case-Sensitive + Journaled) external WD 120Gb HD (which has an external powersupply) to the USB port, it DOES show in the Airport Utility (though without the name), but I cannot connect to it, neither does it show in Finder, etc.
When I take a freshly formatted (HFS+ Case-S, Jour.) Memorystick of 4Gb, and I plug it in it both shows in the Airport Utility and I find it in the shared section of Finder.
I can attach the WD Harddrive to my local MBPro and it works fine (either through USB & Firewire)
What is going on? Has anyone else experienced this (the topics I found dealt with Windows, or wrongly formatted, or Time Machine, etc.)?

Thanx for your suggestion: this was however already checked. Just to make sure I unchecked and re-checked the option. No difference
Except for the WD disk not showing (my intend is to get it working), an additional question would be: WHY is there no problem when using a memory stick?
Apparently the memory stick has a 'quality/ability' which the external HD does not have causing it to function but which one?

External hard disk does not show in finder

WD usb external hard disk does not appear in finder. Disk utility sees it and will mount/unmount and eject. I ran repair disk util. and all is well but still does not appear in finder

Hey Hatter, Thanx for the input.
Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck.
I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem. Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later.
Cheers!!

Hard disk does not show in finder

WE had a system failure with our server instance a month back and since then, one of my internal HD's will not show in finder. It's also causing carbon copy pro to fail when trying to find it. I have verified it can be seen in the disk utility and from a terminal prompt. I rant this to confirm:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
No matter what I do, i cannot see it. Verify and repair in disk util come up saying it's okay. I have selected show HDD's in finder preferences. A possibly related side effect is that my users, who can browse this over the network, cannot search in the directory.
Any help you can lend would be helpful.
OSX version 10.8.4
TC

Not partitioned - part of a raid. Was initially formatted, yes. THis has been in production for a couple of years and just dropped out. "THIS DISK" is the disk that vanish. I renamed it for forum purposes.
Results:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS basecampHD              999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:                  Apple_HFS HD2                     999.9 GB   disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS THIS DISK               1.5 TB     disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS TTHIS DISK.Backup        1.5 TB     disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:        CD_partition_scheme                        *217.8 MB   disk4
   1:              CD_ROM_Mode_1 TSIXL-320W              189.7 MB   disk4s0
/dev/disk5
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *3.0 TB     disk5
   1:                  Apple_HFS ServerTime              3.0 TB     disk5s1
No CoreStorage logical volume groups found

Memup hard disc does not show in Finder

I have attached a Memup 250GB hard disk by USB to my MBP. The disk does not show up in Finder, nor in Disk Utility.
The disk works fine if I plug it into a PC. I have formatted it on the PC to FAT.
Any suggestions on how I can get it to work on my MBP?

Sounds like you have a connection issue. Try all the USB ports and a different cable.
Ciao.

Song plays in iTunes, but file does not show in Finder

Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physical location where iTunes shows it to be.
An example is below... these are two song file locations from the 'Master Tune Library.xml' exported from iTunes. Both of these files
show in iTunes, and they both play just fine from iTunes (no exclamation mark next to the song names). Yet only the first file (one ending in 1219.mp3)
is at that location. The one ending in 1249.mp3 does not show in that location, either via Finder, or via Terminal.
From Terminal I get no results from "find /Volumes/LaCie500 -name espace_20101103_1249.mp3" (without the dbl quotes) But if I run the same command for the 1219 file, it does find it in the expected location. Really stumped as from where iTunes is playing ...1249.mp3.
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1219.mp3
/Volumes/LaCie500/myTunes/Unknown Artist/Unknown Album/espace_20101103_1249.mp3
Mac Mini
Mac OS X 10.5.8
iTunes 10.5
iTunes Media folder location is /Volumes/LaCie500/myTunes Both options underneath for "organize" and "copy files ... when adding to Library" are checked.
Thanks!

Try using EasyFind utility to reveal the files.
Are you absolutely positive those files exist? You have verified with iTune's summary view thatthe files is what you think it is?
Show In Finder will usually not only open the directory but also leave the actual file highlighted.

Dvd drive does not show in Finder

My DVD drives (internal and external) do not show in Finder. Why?
If I insert a disk, it will show, but not till then.
I-Mac
Model Name:
iMac
Model Identifier:
iMac11,1
Processor Name:
Intel Core i5
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
8 MB
Memory:
16 GB
OS= Mt Lion

I would like to burn to external as it is much faster and the internal is not liking me.
So, if I pick a file in Finder and click Burn to DVD, it tries to burn to internal.

Disk Utility does not show any result....

Dear Apple Community,
on my mid 2012 Mac Book Air the disk utility test does not show any result. The test just stops at some point and can be restarted again, but does not show weather the SSD is damaged or not.
Does anyone know what this means?
Thanks a lot for your advice!

I think this happens to everyone (who uses "Live Verification") in Mavericks. Occasionally the output from the test shows correctly, but usually not. I guess this will get fixed someday.
Apple - Mac OS X - Feedback
For now, probably you will get best results from using command-r at startup to get into "recovery mode", then run disk utility from there.
charlie

Document content does not show up on screen. Only a blank, gray page.

When I open an adobe document, the contents do not show on screen. Only a blank gray page. How can I fix this?

Hi 89r0z62cap,
It sounds as though that PDF was created from a scanned image, and you have the "Show Large Images" option deselected. Try this:
Open the Preferences dialog box (Reader/Acrobat > Preferences on Mac OS; File > Preferences on Windows).
Click Page Display and make sure that Show Large Images is selected under Page Content and Information.
That should do the trick, but let us know if it doesn't.
Best,
Sara

Extra hard disk via USB time capsule (2TB) does not show in finder etc

I've found hunderds of questions that look alike but not one has solved it.
I have a Time Capsule with 2 TB hard disk. In all descriptions of the TC Apple states that an extra drive can be attached through the USB.
I did that. Wanting to create an extra network drive. I connected a (Apple formatted) WD Essential to the USB. With te newest airport configuration programm I do not see the hard drive. I do see it with version 5.6. BUT: I cannot see what is on it and so (not) select anything. I don't see it with the finder. I did do everything to make sharing possible. When connected directly to IMac it works fine. In airport I selected sharing etc etc. I don't want the disk to be used as a backup system (via Time Machine). Just an extra network disk. Please help.

I don't have a Time Capsule; I have an AirPort Extreme Base Station, which is similar except for not having the built-in storage. Since your question got moved from the initial category (where you posted it) to Time Capsule, maybe someone else who has a Time Capsule will pop by with some advice. If you don't get any more replies (other than from me), you may want to summarized what you learned so far, and post a new question (in this category). New questions often get more views and responses.
With a Time Capsule, you can share the built-in hard drive as general network storage (not just for Time Machine purposes), is that correct? Does that work for you? Can you set that up using the latest version of AirPort Utility?
If you set that up, I'm guessing it would appear in a Finder window in the same way. The Time Capsule appears in the Finder window sidebar, under SHARED. When you select it, the Time Machine's built-in shared volume appears to the right, and you can mount it using whatever security settings you used. If you have an external drive attached to the Time Capsule as well, and it is set up to be shared, it appears as a second shared volume. It is still just that one Time Capsule under SHARED in the Finder window's sidebar, but to the right, there are now two shared volumes. But I don't have a Time Capsule, so I'm not sure about that...
I don't know why the latest version of AirPort Utility does not see the external drive volume? If possible, I would try another USB storage device (even if it's a 4GB thumb drive), to confirm it does work, and it's not a hardware problem on the Time Capsule's USB port.
Also, if you have not tried so far, you may want to reset your Time Capsule (to give it a fresh start).
http://support.apple.com/kb/HT3728
This also has some relevant information about attaching a USB drive.
http://support.apple.com/kb/HT2426

MP3 Player does not show in finder.

I used to have a 1st gen iPod Touch, but that went through the wash and no longer functions. I am now using my backup player which is the first MP3 player I ever owned. It's a Philips GoGear HDD6330 player. The issue I'm having is similar to another issue I had awhile back with my camera. Actually, it's the same problem. When I plug the MP3 player into the MacBook USB Port, it shows up in the System Profiler, but does not appear in the Finder window as an external HDD (which it can indeed be used for when the installed firmware is bypassed as it can be in Windows). In Windows XP, the properties window of the HDD inside the player is that it is a Generic Hierarchical file system. I don't know if that has anything to do with the issue, but I thought I'd mention it anyways.
I did a search of the community posts, and found several posts stating that I would need to use Disk Utility in order to gain access to the HDD. The problem with this is that I didn't have Disk Utility on my machine for some reason. I say "Didn't" because I recently used Pacifist to recover the App from the Install Disks. However, the version that was on the install disks was not compatible with 10.5.7. In the same post that I found the information about Pacifist (which I will link you to shortly) the last few lines state that after the app is installed, that the Combo Updater should be run to bring the app up to date as well as stating that the permissions need to be repaired. I don't know what that means or how to do it.
http://discussions.apple.com/thread.jspa?messageID=6950717&#6950717
I found the download for the Combo Update for 10.5.7, downloaded it, and ran the install program that was in the package which the .dmg file contained. Everything went smoothly, and I rebooted my MacBook. The Disk Utility app was still not up to date with the OS version. So I ran Pacifist again, only this time I extracted the app from the update installer package, and installed it (after getting rid of the old file that was not compatible with 10.5.7). This version (11.1) is indeed compatible, but it will not launch and also has the default application Icon with the paper, pen, pencil, and ruler. Pictures will be included.
At this point I don't know how to get Disk Utility to work, and I'm not even sure if using Disk Utility will give me access to my players HDD. Apple Tech won't talk to me because my MacBook is out of warranty, and there's no way in **** I'm paying for a service that should not have to pay for.
System Information:
http://i3.photobucket.com/albums/y57/HCOPE/Picture34.png
Jukebox in System Profiler, but not in Finder:
http://i3.photobucket.com/albums/y57/HCOPE/Picture26.png
Disk Utility:
http://i3.photobucket.com/albums/y57/HCOPE/Picture30.png
Disk Utility Package Contents
http://i3.photobucket.com/albums/y57/HCOPE/Picture32.png

Alrighty, that's one question answered. But how do I get Disk Utility back and working?

Premiere Elements Disk Menus does not show in replay using Mac Pro OS X 10.9.3

I recently installed Premier Elements 12 on my Mac Pro OS X 10.9.3 (Maverick).
Naturally I want to get the highest possible quality to show off on the TV using a standard DVD player.
Outputting to DVD not using AVCHD retains the menu but not on AVCHD, what am I doing wrong?
The Output Quality using just DVD and not AVCHD is lousy, what have I missed?

SigiPC
Thanks for the reply.
Objective Miscellaneous
Let us start with your objectives. If you are restricted to a DVD disc, then your export choices from Premiere Elements will be
DVD-VIDEO widescreen on DVD disc (720 x 480 stretched to 856 x 480 for display after encoding)
or
AVCHD format on DVD disc (1920 x 1080 16:9)
Disc menus are possible as described for main menu page, scene menu page, main menu markers and scene markers. The players will recognize the stop markers placed in a Premiere Elements burn to DVD-VIDEO on DVD disc, but will not recognize the stop markers in a Premiere Elements burn to AVCHD on DVD disc. There should not be problem with main menu markers or scene markers in either choice.
Also, AVCHD on DVD is not playable in the standard DVD player. You need a Blu-ray player that supports AVCHD on DVD disc. Many do, but some may not. The specifications of the player is your guideline.
For AVCHD on DVD disc, you do not need a Blu-ray DVD burner to burn to AVCHD on DVD disc. That can be done with a DVD burner.
And, under all conditions, a stop marker should never be placed at the end of the last item on the Timeline.
Specific Replies
What disk menu? I am talking about “disk menus” as per page 243 of Premiere Elements Manual.
It was my impression that you said that "Disc Menus Do Not Show...", so I was asking which specific disc menu theme are you using? And, is this "do not show" applicable to all the disc menu themes that you have tried to work with?
I am using a Panasonic Blu-Ray player on the TV.
Are the disc menus of your Premiere Elements DVD-VIDEO or AVCHD on DVD not displaying solely with this Panasonic player? Or, is the same observed with computer playback of the DVD product? If the missing menus in the end product issue that brought you here involves solely the Panasonic player, then I would ask if you have checked the player for any option that would control the display of menus in the playback?
Not sure if I am using “interlaced video” but you would know from my input sources mentioned above.
You wrote "My source media is output from iPhoto and Fotomagico slide shows whose output is MP4 MOV or M4V and if played back in Quicktime are of very acceptable quality (H.264 1920X1080)". That does not tell me if 1080p or 1080i, but I suspect that it is 1080p. The MediaInfo properties readout will give a definite answer.
http://download.cnet.com/MediaInfo/3000-2169_4-10413046.html
Just be careful for unwanted carry alongs with the MediaInfo free program. But iPhoto and Fotomagico should be telling you before export whether you are exporting 1080i or 1080p. My main focus on the Premiere Elements 1080p DSLR aspects related to slideshow is the fact that that Premiere Elements DSLR project presets seem to give consistently a sharper photo image in the end product. So when applicable (photo and video wise) it is the preferred route for me and others.
“Quality area” and space requirements are not of concerns at this stage since present show length is not even 30 minutes – or should I be concerned for some other reason but space?
As routine, the Quality area Space Required and Bitrate should be known, even for your 30 minute Timeline content duration. You should be working with a check mark next to "Fit Content to Available Space" and watching the Bitrate in that area. Anything lower than the maximum 8.00 Mbps indicates that the program is making a fit by lowering the Bitrate. The extent that it does not impacts the quality of the end product. Also, of note, the that Bitrate is a variable one in the end product.
This may or may not affect what you are doing now, but it is important information to include in the discussion "just in case".
Also, related trivia...DVD disc marked 4.7 GB/120 minutes is in reality 4.38 GB; DVD disc marked 8.5 GB/240 minutes is in reality 7.95 GB.
Are we any closer to getting at why your disc menus are disappearing after end product creation in Premiere Elements and at playback with your Panasonic player?
Please review and consider.
Thank you.
ATR

Airport Disk content does not show in finder?

Similar Messages

Maybe you are looking for