Airport does not communicate with my wireless printer

Hello all,
I can really use some help here. We have a Canon wireless printer and an Airport Extreme. The printer was working wirelessly until recently and I called Canon for tech support. I was on the phone with Canon for an hour. We have trouble-shot the printer every which way. They are now telling me that the airport is not communicating with my wireless printer. Is there someone that can help me check this?

Earlier G5s had an external T antenna I believe, besides the antenna wire inside...
http://support.apple.com/kb/TA27092
http://www.macproonline.com/Airport-Extreme-antenna-external-G5-Tower/PowerMac-G 5/PowerMac-G5-Parts/G5-June-2004-Dual-20-Dual-18-PowerMacs-Replacement-Parts-p56 36587.html
One of these may be a better/cheaper option...
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
Message was edited by: BDAqua

Similar Messages

TS3899 My ipad does not communicate with iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting should be changed?

My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?

It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved.

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

I have updated my macbook air to OS X Yosemite. Now my computer does not connect with my HP printer 1300. What do I need to do to resolve this problem?

Hello,
I have recently updated my mac book air to OS X Yosemite. Now my mac book air does not connect with my HP Laserjet 1300 printer. Can you please tell me what to do to solve this problem?
Thank you very much.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Kernel 2.6.32 does not work with RT2860 Wireless Card

since 2.6.31 my RT-2870 is not longer working
ifconfig says that the Wireless ra0 was renamed to wlan0 and since then its not longer working
since 2.6.32 my RT-2860 (build in) is not longer working too
it was renamed from ra0 to wlan0 too and read above^^
whats happening there?
since now i used wpa_supplicant but i already tried with NetworkManager and WICD
//Edit: 2870 works in 2.6.32
Last edited by Vamp898 (2009-12-17 06:58:27)

The Official RT-2860 from the RaLink homepage does not work too
Homepage: http://www.ralinktech.com/support.php?s=2
Error:
make -j3 HOSTCC=i686-pc-linux-gnu-gcc CROSS_COMPILE=i686-pc-linux-gnu- LDFLAGS= -j1 -C /usr/src/linux M=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux PLATFORM=PC CHIPSET=2860 RT28xx_DIR=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0 RT28xx_MODE=STA clean modules
make: Entering directory `/usr/src/linux-2.6.32'
CLEAN /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/Module.symvers /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/modules.order
LD /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/built-in.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_md5.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_sha2.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_hmac.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_arc4.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/mlme.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wep.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/action.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_data.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_init.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_tkip.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/eeprom.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_info.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cfg.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/dfs.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/spectrum.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_timer.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rt_channel.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_profile.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_asic.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cmd.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/assoc.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth_rsp.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c: In Funktion »STAHandleRxMgmtFrame«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c:689: Warnung: Variable »pRxD« wird nicht verwendet
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/connect.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c: In Funktion »RtmpOSNetDevAttach«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1689: Fehler: »struct net_device« hat kein Element namens »open«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1690: Fehler: »struct net_device« hat kein Element namens »stop«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1691: Fehler: »struct net_device« hat kein Element namens »hard_start_xmit«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1692: Fehler: »struct net_device« hat kein Element namens »do_ioctl«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1702: Fehler: »struct net_device« hat kein Element namens »get_stats«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1736: Fehler: »struct net_device« hat kein Element namens »validate_addr«
make[1]: *** [/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o] Fehler 1
make: *** [_module_/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux] Fehler 2
make: Leaving directory `/usr/src/linux-2.6.32'

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

Itunes 10.4.1: does not sync videos and does not communicate with outlook calendars

Hellos,
Since upgrade to itunes 10.4 I have found the following problems and no solutions yet from apple (altought version 10.3 worked flawlessly):
1)When you check "include videos" on the sync photos tab, you get an error. The "solution" is to uncheck sync videos, but what if you want your videos?
2)I noticed today the calendar has issues. Appointments you input in outlook (on a calendar that is supposedly synched with iphone/ipad) do not show on the devices and viceversa (although they do show on iphne and ipad if you sync both, but outlook is left behind.
In outlook I have calendar and calendar mobile (the second is the one I sync to iphone). To test, I included a new calendar (calendar mobile test) and I as suspected when trying to sync, the new calendar does not show in itunes options to check the selected calendars. The previous library info probably show my mobile calendar (that was synched already) but the new one does not show up, so I think there is really a problem in itunes.
These bugs have been around now for some time now, and I am really surprised that are not adressed more agressively by apple developers.
While videos may seem as a secondary thing if you look at it from a corporative point of view (but ****!!! I WANT my videos on the my ipad and iphone!!!!), not synching appointments you add to the ipad/iphone and you expect to show on outlook and viceversa, are meant to be an unplesant surprise for those who rely on these devices.
Bottomline: I like ipad/iphone, but APPLE..., you need to solve these issues that have been around the forum for some time now. Common!!!
Windows 7-64 bits
Ourlook 2007

I had a similar problem. My iTunes didn't start automatically when I connected any of my devices after the upgrade to iTunes 10.4.1.
I found I had to add the iTunesHelper.app in System Preferences->Users & Groups under my account on the Login Items tab.
You have to navigate to it in finder, because I couldn't seem to do "Show Package Contents" on iTunes.app in the Applications folder from the file dialog you get when you hit '+'.
Once you have opened the package contents of the iTunes.app then the iTunesHelper.app is in Contents/MacOS. I just dragged and dropped into the Login Items window, then ticked it to start on login.
Note, this will only start it when you log in, to start it immediately just double click iTunesHelper.app in finder.

Key fn + Backspace does not work with apple wireless keyboard

Hello,
I want to user the WIndows Key DEL. However, the apple wireless keyboard dosn't have such a key. I read, that FN + Backspace will solve this. It does not work on my apple wireless keyboard. I'm using BootCamp 3.2 and WIndows XP, running on a Mac Mini 2010.
In addition, I also read, that FN + Cursor Left sould work like POS1. But this doesn't work, too.
Windows shows for the keyboard: Deutsch (Apple)
Regards Dirk

Hi mate,
This worked for me:
http://code.google.com/p/uawks/
Cheers,
Anthony

My I phone calendar does not communicate with my I Mac. I called support an they said you need to buy Lion, snow leopard no longer supports this. Can this be right? It has always worked before.

calendar events on I phone does not show up on my I mac.

You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
http://forums.macrumors.com/showthread.php?t=1365439
We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
Our only choice as users to stop using both products and seek software/hardware stability.

Adobe Acrobat IX Pro (v 11.0.06) does not communicate with my HP Photosmart 6520 scanner but prints to it with no problems. Any suggested fixes?

Printer is new with latest drivers installed. TWAIN is available in drop down menu box, but returns following error when selected:

I arrived here looking for a solution! And while reading your post the penny dropped that I didn't have a serious problem. I have a booklet of 112 pages and all I needed to do was re-order the pages as printed so that 1 is followed by a sheet with 2 on the under-face but same side and so on. The pages had printed back to front and needed flipping. But then I have a duplex printer and maybe that makes a difference. Is it to do with your manual duplexing and the order that the second pass is presented to the printer. As my duplex sheets effectively needed flipping over each one I'm wondering if you can solve your problem with a little experimentation and re-ordering before your second pass.

My computer is not communicating with my wireless printer

My hp computer is not recognizing my wireless HP 8600 printer. The printer has worked fine for the past year. The message says that the printer is off line and to check the cable or network. The printer is working fine because I can print from the two other computer that are connected to the wireless network. I went through the trouble shooting procedures for the network, but the network is fine. Anyone have this problem with the software on their computer?

Important

HP LaserJet 2840 not working with Leopard (Wireless Printing)

I just upgraded to Leopard and my HP 2840 LaserJet Printer will no work. There is no Leopard driver and I have re-installed the software many times from the internet and from a CD. Im printing wirelesly with a Airport Extreme Base station (Last generation).

fixed

RT Host VI does not communicate with FPGA VI with PID Discrete controller

Hi. I am using LV 7.1 RT with PXI 7831R. While developing an application with a PID controller in the FPGA vi, I have run into the following problem:
1. After a successful FPGA compile, the code runs directly on the FPGA device and the PID controller works fine.
2. After I switch to the RT and run the host vi, it shows no activity from the FPGA vi. I look at the while loop count of the FPGA (indicator named 'FPGA-count' in the snaps below)) and it shows 'zero'. I have refreshed the FPGA vi reference but to no avail.
3. If i take out the PID related stuff from the FPGA vi, then the Host vi to FPGA communication works.
I have attached snaps of a simplified version of the fpga and RT vi's. If anyone can help, that would be greatly appreciated.
I also read that the PID control toolkit needs to be installed. It is installed on the host computer and shows in Automation explorer under LV 7.1. Does it need to be installed on the remote machine that is the RT controller as well. if so, then how to do that.
Thanks
Attachments:
RT-frt panel.JPG ‏38 KB
fpga-block.jpg ‏39 KB
RT-block.JPG ‏35 KB

It seems like the FPGA is not running for some reason when you are running the RT VI. Without having the actual VIs to look at I can only make a few guesses why.
On the Open FPGA VI Reference make sure the option is set to Open and Run, not just Open. Right click on the node to check this option.
On the RT VI, make sure that stop-FPGA is False before you start.
On the FPGA VI, make sure that the default value for stop-FPGA is set to False.
In the RT VI check the error cluster passed to the loop to make sure that there are not errors and the FPGA VI is actually running.
If you are using the PID function on the FPGA, you do not need any additional SW installed on the RT controller. If you are using the PID function in LV RT then you do need to install the PID toolkit on the RT controller. This is done from MAX (Measurement and Automation Explorer) using the Install Software option for the controller.
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Ipod touch does not communicate

my ipod touch does not communicate with my pc. i have followed the trouble shooter and still does not work.

iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Try another cable
- Try another comnuter
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My wireless hp printer will not communicate with my hp pc

my wireless hp printer will not communicate with my pc

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - Wireless LAN or bluetooth?
Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Airport does not communicate with my wireless printer

Similar Messages

Maybe you are looking for