Airport does not recognize any networks, no signal whatsoever, SOMEONE HELP

Hello, I use an iBook at the office, i have been using it for several months here and at home, worked fine until yesterday, logged on in the morning everything was working fine, until airport had no signal, it did not recognize any networks, at first i thought it was a problem here at the office, all the other computers are working.
I tried it at home and it doesn´t recognize anything at all.
The network status says that airport is turned on but it is not connected to any network.
It`s clearly a problem with my computer, not the network, can anyone help?
Regards
Rodrigo

Rod1, Welcome to the discussion area!
Verify that the antenna wire is still properly connected to the AirPort card. It may have come loose.
If you have an iBook G4 you can use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is still properly connected to the AirPort Extreme card.

Similar Messages

  • My printer does not recognize any network

    my e-Station does not recognize any network

    Hey there!
    Exactly which model are you using? Any additional information would be great, such as what type of network you're trying to connect to and if you are connecting through a wireless or wired connection. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Airport does not recognize available network

    If I broadcast my network SSID Airport detects the network and logs on to the network OK. When  the network does not broadcast the SSID, Airport no longer detects or logs on to the network. When I make the change to no broadcast my computer's time of day also changes. I prefer not to broadcast the network SSID because I have experienced hacking of my network by a neighborhood techie.

    First, let me apologize. This is my first day on the forum and I clicked on an area that I thought was a good place to start. My operating system is actually 10.6.8.
    To answer your question, the encryption used is WPA2-PSK. My router is a Netgear WNDR3700.
    I have also unchecked "Set date and time Automatically". And the current time is now showing. I didn't have the time problem when the SSID was broadcast.
    Thanks for your response.

  • Hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
    Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone.

  • HT4623 My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi.  Help

    My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi. 
    I am trying to update to 7.0.2 and cannot because I cannot access a wi-fi.

    Give this a whirl and see if this helps.
    Forget the network on the device and turn wifi off.
    Turn bluetooth off. (Not sure why, but seemed to help with others)
    Turn on airplane mode and then off again.
    Reconnect to you network and open up a browser to confirm connection.

  • Airport does not detect wireless network; it says problem = [network]"connection timeout"

    It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
    This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

    i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

  • Westell 327W gateway does not recognize Brother network printer

    The Westell 327W gateway does not recognize Brother network printer model MFC-490CW.  Any idea?

    I took a look at the Brother www site and would recommend the following:
    Temporarily Connect the Printer to the Network with an Ethernet Cable
    Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
    You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
    Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • I am now able to receive emails in MAIL, but Yosemite's Mail program does not recognize any of the server's connections that have worked for years!  What do I do next?

    Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, !  What do I do next?

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Windows XP re-installation does not recognize any hard drive - help

    Hi,
    I have X60s Model: 17044JU
    I have original XP installed.
    My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
    When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
    I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
    Any help how to install new XP would be appreciated.
    Thank you
    Miron
    Moderator edit: Masked serial number to prevent mis-use.
    Solved!
    Go to Solution.

    Hi
    I changed BIOS setup from AHCI to Compatibility and indeed it worked.
    However there is easier way to reload new system on thinkpad.
    I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
    Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
    I found it pretty convenient.
    Thanks for help.
    mc

  • Itunes does not recognize any calender to synchronize with

    My computer is repared and has a new hard disk.
    I have installed the latest version of iTunes and Outlook 2010 on my computer.
    I want to synchronize my iPad with my computer, but iTunes does not recognize any calender to sync with.
    In the old situation I synchronized my iPad with Outlook 2003. That worked fine.
    During the repare-time my iPad has become leading.
    How can I solve my problem

    Hello SCorky,
    The following article provides steps that can help get your devices back into iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • G3/OS 10.3 does not recognize the network

    I just mounted a new Airport network card into a (WiFi capable slot) iMac G3 (576 Mb RAM) running OSX 10.3. After restart, the Airport icon in the toolbar is present, albeit all gray, as one would expect before connecting.
    My network is served by a D-Link 801.11G WiFi router. SSID is not cloaked - it is broadcast and freely accessible: It works, several (non-Apple) laptops recognize the network and connect to it fine.
    However, my iMac does not see the network, neither from the Airport icon in the toolbar nor scanned from the Airport Setup Wizard. I located the iMac right next to the WiFi point to eliminate any signal strength/interference issues.
    I will bring an Airport iBook G4 as well as an Airport Express wireless point to check if there is something wrong with this iMac's card, and will also bring in a long CAT5 patch cord to hard-connect the G3 (to download any Airport patches or firwmare upgrades), but was wondering if anyone has any thoughts on why a non-cloaked 802.11G network would not be recognized by my iMac.
    SK
    iMac G3 slot (blue) Mac OS X (10.3)

    Ensure that you have the antenna wire properly connected to the AirPort card in the iMac.
    Also ensure that your D-Link is configured to work either in 802.11b/g or "802.11b only" mode. Since the original AirPort card in your iMac is 802.11b, your router must be in a 802.11b compatible mode.

  • HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives

    I erased my hard disk to install Windows 7.  Now my computer intermittently does not recognize that there are any drives attached to the sata ports.  I go into BIOS pressing F10 and it does not list any drives at all.  I have a DVD burner and a bluray and a western digital 1TB hard drive connected.  Sometimes they show that they are connected other times it doesn't.  It's strange.
    When it does recognize there are drives connected, I boot up from the Windows 7 DVD.  Then I try to create a partition on the hard drive.  The installation recognizes a 930GB hard drive with no partitions.  Every time I try to create a partition, it says I need a driver for the hard drive.  I have a driver that I downloaded off of HP's website yesterday, the driver for nvidia sata.  I put it on my usb drive.  It recognizes it but says it is the wrong driver.  I don't know what else to do.  I have built dozens of computer and repaired hundreds, but I have never run across a problem like this and I hope you can help me.

    Thanks for your help, but that's exactly the driver I used.  It didn't work.
    My problem is not just with the hard drive.  All three drives (two optical, one hard disk) should show up in bios, whether or not there is a disk in the optical drive or a partition on the hard drive.  It intermittently stops detecting the drives.  One time I boot and go into BIOS they are there, and I can run installation of Windows (partially).  But if a turn off the computer and turn it back on, they've disappeared.  Sometimes they will be detected, sometimes they won't.
    I'm thinking the driver problem with the Windows 7 Professional x64 installation is somehow connected to the drives randomly not showing up.  All drives stop showing up at the same time, not just the hard drive.  So it's not a driver issue.  It has to be connected to the BIOS and motherboard.
    This computer is only 4 months out of warranty.
    Any more help would be appreciated.

Maybe you are looking for

  • Need help with converting PDF files to word document.

    When attempting to convert PDF files to word document, after clicking on "convert" a message "error occurred while signing in" displays. Don't know why??? I'm logged into my account and haven't been able to convert documents.

  • How do I stream Daily Show or NYT videos?

    Thanks for reading and responding to this. I have an ipod touch and would like to be able to watch NYT videos and the Daily Show on it, streamed from the internet. How do I do this and what do I need to download-- or for some reason, is it not possib

  • Issues with Content Query Web Part List Override

    I have modified a Content Query web part to show all checked out documents across my site collection. I used this property to get the checked out documents: <property name="QueryOverride" type="string"><![CDATA[<Where><Geq><FieldRef Name="CheckoutUse

  • Time Machine Recover iPhoto Image

    So if I want to recover an individual photo using Time machine from the iPhoto file it seems to me that the entire iPhoto file will be replaced instead of the individual photo.  Is that correct?

  • Sales Incentive Recip (/IRM/IPSIHDR-RECIP) - Indicator for qualification ?

    Hi, Table /IRM/IPSIHDR stores the Sales Incentive Recipient number is field RECIP. Based on this number or on something else, how can I determine if the Salesman qualifies to be a sales incentive on a particular week's pay? Responses will be rewarded