Airport does not want to connect to a weaker signal

my airport has decided that it does not want to connect to a weaker signal. at home if i am next to the wireless source my computer connects just fine, but if i go downstairs to my room the signal strength starts dropping and then will disconnect all together and i am unable to connect again. the signal strength is strong enough to connect because my computer connected just fine before and i tried it with my brothers computer (he has a 15in macbook pro) and it connects just fine. any suggestions? thanks
=)-SamIam-(=

yes everything connects to the same wireless internet. i did notice i had a harder time connecting around the time i upgraded to 10.5.6. (i cant remember for sure)
i don't think it matters but i am not connecting to a AP base station at home. We use our iMac for our wireless internet. but even if i am not at home i cant connect to any wireless signal while others around me are connecting to a free service in town. (i used to be able to connect to the same service in town to which i can not anymore)
i did notice that when i open my MBP and wake it form sleep i am able to connect for a couple of min, then the signal gets weaker and weaker until it disconnects and i am not able to connect again.
thanks
=)-SamIam-(=

Similar Messages

  • HT1689 how can i undisable my ipod touch when itunes does not want to connect?

    My brother's ipod touch 4th generation was cracked on the screen and was not able to see anything after a while. We finally fixed it and now it says "IPOD DISABLED CONNECT TO ITUNES". We tried connecting it and itunes does not want to connect because it says that the ipod has a passcode and until we unlock it, it will do it. So we our stuck and on top of that, the ipod's power button does not work, so we waited to uncharge the ipod so we can try to connect it again and it still won't do it. We do not know what to do, and we cannot afford to buy a new one. Is there a solutiong for this? Thank You.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My ipad does not want to connect to my home wifi's, worthless. why has this just happened. is apple aware?

    In the last 2 days my Ipad does not want to connect to the internet via my home wifi's i have not done anything different so cany understand why this is happeniong. it just wont connect. Its a good job i have my 3g connection otherwise it would be worthless. i have tried resetting my wifi connections on my pad and unplugging the modem and resetting that. nothing is working. i have read several forums about this and seems to be an issue with a lot of ipads, i have read what you can do, however i dont think i should have to reset this, reset that, change this and change that when clearly its an apple issue.
    can someone provide me with any simple way of fixing this issue. or can apple spend a little bit of their millions of dollars of profit to fix this little proble.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Airport does'nt want to connect to ANY wireless network

    hello there.
    once more someone writing who is experiencing problems with the macbooks incorporated airport.
    after joining a 3rd party wifi and returning home, my macbook is unable to connect to ANY wifi network. the bar is completely grey, but airport finds all available networks. in the network dialog appears "airport is active, but not connected to any network", indicated by a red lamp. i am also not able to connect to my network's router typing its local ip in the browser.
    rebooting hundreds of times, removing all networks from the list and re-adding my WEP-secured home network did not solve the problem.
    i also tried almost all solutions apple offers to fix airport problems including installing the newest firmware, but all this resulted the same.
    in the diagnostics, airport seems to work normally, exept that i cannot connect to any network. furthermore, now my macbook does not accept the (correct!!!) WEP for the wifi, telling me that it is invalid - i tried it with and without the "$" in the beginning.
    does anybody have an idea how to bring me back online?
    gracias, benbanderas

    IM having a very similar problem myself! i have my Macbook for around a year now and i have never actually had any problems with it apart from the wireless connection. my router is a speedtouch 576 and i have never been able to pick up a signal.
    I dont fully know how to connect it to a wireless network even if there was signal because I have never been able to go online wirelessly. when i do get a signal a bar appears then disapears several times and when i try to connect it says password is wrong even though it might be correct (using all different 128's and using the $ )
    not sure if it is a hardware roblem but I wondered if i could take it to an apple care store and see what they think about it. perhaps thats the best thing you could do if you have applecare?
    Jono

  • My mac mail is asking for my password and its the correct one, but it still does not want to connect to the mail? how do i fix this?

    It's asking for a password, i'm putting in the correct one and it's still not working. it says mail cant connect to the account "...."
    please help!

    If you've activated 2-step verification, you need to generate an application-specific password in your Google account and enter it instead of the login password you use on the website.

  • 890L does NOT want to connect.

    Shows 3G.  Latest firmware.  When trying to connect, it just fails.  Anyone else experiencing this problem with their Jetpack?

    The first steps to try are the resets.  Try performing a SIM card reset first.  If that doesn't improve the situation then try restoring the defaults by pressing the button under the back cover.
    When the resets do not work then you need to consider evaluating your environment for interference.  4G LTE is only going to be strong in a full service 4G LTE area.  Anything marked as 4G LTE extended is provided on a best effort basis.  Check the coverage maps to confirm what you should have access to according to VZW.
    After you know what you are working with the next step is to perform site surveys and discover where the connection problems start and end.  You should perform multiple site surveys and build a map to know if the problem is isolated to one area or not.  Id suggest starting inside your home, outside your home, up the road, in the middle of town and the next town over.  This should give you a good sampling of the various towers and environmental interference issues you are exposed to.
    Site Survey:
    http://3gstore.com/page/13_will_an_antenna_help_me.html
    Let us know how your site survey goes and we can suggest the next steps from there.

  • HT4623 How do i update an older ipad's IOS? It does not want to connect to server.

    How do I update an older IPAD?  When I go to update it gives me a message regarding it cannot connect to the apple server, yet internet service is okay.
    I have also checked to see if itunes is listed in program to accept through the windows firewall. All of this is good. Any suggestions?

    Is this iPad used? 
    iTunes should be version 11
    It should be reset to wipe all content from the device and set up as a new device with iTunes.    It should update to IOS 7.0.4

  • Airport does not detect wireless network; it says problem = [network]"connection timeout"

    It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
    This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

    i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

  • My phone does not want to come on pass the 'connect to itunes' logo.   I have a iphone 3Gs. It happened after I tried to restore it after updating it through itunes on my computer.

    My phone does not want to come on pass the 'connect to itunes' logo on the screen.  This happened after I was updating the phone software through itunes, and itunes said I needed to restore my phone if it is to work with itunes, which I did.  An error (1015) box popped up and... well.... here we are.  I have an iphone 3G.  The support coverage is expired. 
    I just want to return to my phone functioning as before.

    Was this iPhone jailbroken?

  • I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

    I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

    Apple support article:
    Mail Keeps Asking for Password
    Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/message/20549403#20549403

  • I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    Shoeb, hi.
    Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

  • AirPort does not have an IP address and cannot connect to the Internet.

    Wi Fi problems
    I have recently changed from a old netgear router to using a vigor 120 modem with airport extreme
    Internet connection is established but my airport express reports "AirPort does not have an IP address and cannot connect to the Internet." although status is ON and the correct wifi address appears.
    My iPhone also identifies the correct network but cannot connect
    Any suggestions?

    I don't have any phones, so not aware of the options, but on a Mac to fix this problem it'd likely be...
    Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
    https://discussions.apple.com/message/17028445#17028445
    Or...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot

  • AirPort does not detect networks, unless another network connection is made

    I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists.
    AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or to another Mac via Firewire to use network sharing, it can update and load web pages as normal. A strange quirk I've noticed though, whenever connecting with ethernet or firewire, AirPort will suddenly detect the network! It still can't quite connect to WiFi properly though. While still connected through firewire or ethernet, it will have no connectivity through a self-assigned IP. If it is disconnected from ethernet and firewire again, the wireless network will still show up in a re-scan for networks but it will fail to connect.
    I've opened the computer up to ensure that the airport extreme card is seated properly as well, and that the antenna cable is secured properly.
    Any ideas as to what the issue is? Should I look into replacing the AirPort Extreme card?

    Got no answer on my original post, so I went ahead with ordering a replacement AirPort card on eBay (item #130487488014). Once installed, the iMac was able to detect and connect to networks normally... but was still unable to load any web pages. I tried on secured and unsecured networks as I did previously, and plugging directly into the router and into my Macbook Pro via firewire, with the same results as before. Safari loads pages when connected with an ethernet or firewire cable, but will not load pages on WiFi alone. I can attempt to access a router setup page via WiFi, and am prompted for a username/password, but the page itself never manages to load.
    Any clues as to what may be going on here?!

  • Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.

    Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.
    Bought my girlfriend the newest Macbook Pro 13" and began experiencing problems with my wifi the moment we got home. Her Macbook would not connect to our home Wi-Fi while my old Macbook Late 2008 running Snow Leopard connected without a problem. Airport would say that it had a Self-Assigned IP address (168.x.x.x). Did not realize it was a Lion problem until after using her Macbook Pro and becoming jealous of the new OSX, I upgraded. Soon after I was unable to go online. Luckily I had my iPad 2 and I began to scoure the net for help. Ran into allot of suggestions but it was not until I tried the following all together was I able to share the good new, from my Macbook. Hope this works:
    First go to Preferences > Network and click on the cog next to the + and - on the sidebar and click Set Service Order
         - Move Wi-Fi to the top and click ok.
         - Set location to Automatic
         - Click Apply
         - Click Advanced
         - Click the "-" on the selected Wi-Fi router you wish to connect to
         - Click Apply
         - Click Lock to Prevent Further Changes
    Go to your Mac's harddrive, (Macintosh)
         - Go to Library > Preferences > SystemConfiguration >
         - Delete "com.apple.airport.preferences.plist" file
    Turn off your computer
         - push and hold Option+Command+R+P
         - turn on computer
         - when the grey screen turns on you will hear the OS X "ON" sound (for lack of a proper term) and it will momentarily restart.
         - you will once again hear the "ON" sound, let go of all keys.
         - this resets your PRAM
    Go to Preferences > Network > Advanced > + sign
         - click Choose a Network
         - Select your network and enter password
    Viola!!! I tried this on my Macbook Late 2008 and my girlfriends new Macbook Pro 2010

         No you are clearly mistaken. The Self-Assigned IP address problem exists on many Macbook Pro models, including the current model, which I mentioned as being the original computer with the problem. While my 2008 Macbook is older it was working perfectly on Snow Leopard and didn't suffer issues until switching to Lion. So clearly the problem exists on the operating system and not so much the hardware.
         I called Apple Support  and they had no fix for the problem and told me that this would hopefully be addressed in a subsequent update. It wasn't until I came accross the answer after trying many different methods that I got both of the Macbooks to connect to my router. Otherwise I wouldn't or could not have been surfing the internet for the last 4 months.
    Cheers.

  • Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

    I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
    Thank you
    Roy from malden

    Hi Roy, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Maybe you are looking for

  • Dunning letter was not created

    when i am doing for dunning letter in f150 it showing the following error message "list contains no data" .

  • Reading one file at a time using File Adapter

    I am using a File Adapter which polls every minute to read files from a Folder. This process picks up all the files in that folder. What I want to achieve is that the File Adapter should read one file at a time. Is it possible to force it to wait for

  • Connecting to Oracle lite via VB6

    Hello is there a better way to connect to Oracle 10g when using VB6? this is what I have: Under references I am using Microsoft DAO 3.6 Object library I do have a module where I defined the following public variables: Public wsOracle As DAO.Workspace

  • Unable to get the Edit Original Action ID

    Hi all, I am trying to intercept the Edit original and Edit with functionalities.After going through forum and samples,came to know that it is possible only by using ActionFilter. After implementing the ActionFilter ,I am able to catch  Edit With>Oth

  • Is there any options to organise groups in contact...

    i am using nokia asha 502 There is no way to organise contacts as seperate groups ? even while sending messages there is no way of selecting more than one contacts ? is there any way to organise groups in contacts  or any ways  to create groups for m