Airport driver for Windows (Bootcamp)
I have WindowsXP running in Bootcamp, but can not get the Airport driver to work. I have used the driver from Leopard CD. When I try to install the Bootcamp drivers in Windows, the system go in bluescreen and restarts.
It seems to be a problem with the Broadcom driver.
Anyone got this to work ?
Hi,
I can't help you, but I have problems with my brand new MacBook Pro with bootcamp 2.1 and XP. I can install the drivers but the wireless slows the machine (audio pops and crackles, mouse lag then blue screen and/or freeze).
I have no problem at all when wireless is turned off. I have the problem with SP2 and SP3.
Probably a driver problem. I've tried to get new drivers from broadcom with no success so far.
Similar Messages
-
Bought windows 8 and I can not install the driver.. Help
Try the version from here: http://support.lenovo.com/us/en/downloads/ds034647
It says T440p, etc... but it should work. Force the install using Device Manager if you need to.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?
OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".
-
Airport Utility for Windows fails during install
I downloaded the latest driver for the airport utility for Windows 7. Ran the exec and during the install had a failure on some file that didn't get installed.
Have all firewalls down. Utility comes up but doesn't find my airport extreme.Thanks. Tried the hard wire approach and the utility didn't find it. Did the config other and it was found. So the unit is there but the utility can find it which is what I need in order to connect the shared drive to my windows 7 system.
The airport base station agent is running and configured but I never get a prompt to enter the disk password.
Nice clue about using the IP to connect.
I did this via WIFI. Used my iMac to get the IP address.
The time machine is in bridge mode and connecting through another router to the internet. -
Driver for window 7 of MacBook Pro A12896
Hi, how can i download the MacBook Pro Laptop
series is A1286 can download driver for Window 7 32bit??The drivers are installed with boot camp set up.
http://www.apple.com/support/bootcamp/ -
If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?
If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
If you want to run Mac and Windows at the same time, you could do what I did:
Get Parallels
Install Windows as VM on top of Parallels
Install Office in Windows
Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt. -
HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
RaulOk, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301 -
Lenovo Thinkpad 8 Wifi driver for Windows 10?
I've installed Windows 10 Technical Preview on my Lenovo Thinkpad 8. It's been working pretty nicely, except for one thing: the Broadcom Wifi card driver (Broadcom BCM4324 Wireless LAN Driver). Since this doesn't work I have to use a USB antenna.
This driver has gotten no update since the release of the Thinkpad 8! I tried running it in "Windows 8 compatibiliy mode" and that still doen't work. Does anŷone know of a possible way to make it work (either with an update, or an older driver in compatibility mode)? Any idea or suggestion (or word from Broadcom) is welcome!I had the same problem and installed the Win 8.1 version of the driver.
First deinstall the microsoft driver, download the driver from http://support.lenovo.com/<xx>/<xx>/products/tablets/thinkpad-tablet-series/thinkpad-8/?tabName=Down...
replace <xx> by your language code. eg. en (my language code was de)
look for Broadcom BCM4324 Wireless LAN Driver for Windows 8.1 (32-bit) - ThinkPad 8 or (64-bit in case)
Start the installer and you're done.
strolchi -
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in allHi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
HP Deskjet 1280 Driver for windows 8.1 Pro
Hi Team,
I have upgraded my compter operating system from windows 7 professional to windows 8.1 pro now, I unable to install HP deskjet 1280 printer to new operating system.
Can you please send me a link to download the driver.
Regards,
UmeshHi @Umesh_kanth ,
I understand that you need the driver for Windows 8.1. I would be happy to help you.
I checked the website and unfortunately there isn't any drivers to be able to download for Windows 8.1 for the HP Deskjet 1280 Printer. But you should be able to install the printer with a Windows generic driver. Plug the printer into the computer to see if Windows will automatically install a OS. driver.
You might have to add the driver manually, here are the steps:
Go to the start up screen. (tiles menu)
Type in "Devices and Printers", select settings, click on Devices and Printers.
Click on Add Printer and follow the steps.
Select the HP Deskjet PCL3 Class Driver from the list.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
HP deskjet F370 driver for windows 8
I don't seem to be able to find a driver for Windows 8.1 that will allow me to use my HP Deskjet F370. Can anybody give me advice?
This question was solved.
View Solution.Hello hnnh,
There are two ways to download and install the ful featured software for Deskjet F370..
1> Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
2> Or click HERE to go to driver page, select your PC OS , click next and then click on Driver and download full featured software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
HP Photosmart 325 driver for Windows 7, 64 bit
I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)
Use the Photosmart 320 series driver available through Windows Update.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Installing HP Laser Jet 5 driver for Windows 7 64-bit or 32-bit
I had an issue with installing an HP LaserJet 5 printer to a WIndows 7 64-bit box. I thought I would post my experience and solution to this problem so that others can quickly resolve similar issues.
If you connect as I did with a Parallel Printer-to-USB cable, then Win-7 searches for drivers automatically. But none werre found. However, using "Add Printer" via Control Panel/View Devices and Printers/Printers and Faxes, then left click starts the process for finding and installing the HP driver needed.
No need as others have suggested to go to HP Support Center to install their Universal Printing PCL 5 driver found here:
www1.hp.com/...Universal Print Driver for Windows PCL5/
Hope this helps speed you on your way!Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP. -
CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn
I'm having a problem with our IT department. My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently. Now the one he INSISTS I use has only one tray selection.... Auto. I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX. That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver. I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!! Now, the poor printer is trying to run perforated cardstock through the duplexing unit. Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit. Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable? I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat. He is hard to get along with and has been playing games this whole time. I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members. PLEASE HELP! I think he's leading me down a merry path. It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics. I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options. HELLLLLLLP!
Thanks sooooo much!
Kathi T.
[text removed for privacy]Any suggestions re correct driver for windows 7 and HP 4600dn?
-
Use external drive for windows and mac
Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.
Maybe you are looking for
-
Plug-in Request Group field into the external authentication plug-in
Hi all, I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field. I've made some tests adding some users into groups OracleDASAdminGroup
-
Cannot get the bookmarks list to stay up on the screen, it works, does go to the sites I click on but gets annoying when I have a quite a few sites I check every day having to open the menu every time.
-
Dynamic Mapping : Context Controller to Context iView
Hi, i'm trying to mapping attributes from a Context Controller made at runtime to a Context iView inside a view set. Someone can help me with the code ? In which way i can reference the iView from a method in the controller and mapping the attributes
-
SEEBURGER AS2: AS2 Adapter failure - Cannot authenticate the user
Hello, All was working fine but now I got these errors in an AS2 scenario. Sending a message via AS2. Also we don't receive any messages via AS2 anymore. This is the error when sending a message: Unable to forward message to JCA adapter. Reason: Fata
-
Scenario: R/3 - XI - Third Party System: Manage queues
Hi to all, my scenario is: an R/3 system which extract some datas -> XI -> datas are used in a third party system. In R/3 system I did a custom program which extracts datas and send them to abap proxy, this program is used by a key user who can execu