Airport Dual Ethernet

I have added a Mac Mini to my network. It is connected via ethernet cable to my ABS Dual Ethernet Snow. I can connect each computer via the ABS.
The Mac Mini is one of the early models and has no Airport Extreme.
Is it possible to use the ABS to connect to my BT Home Hub router wirelessly?
Power PC 400 G4 AGP 10.2.8 Mac OS X (10.2.x) iMac G4 800 10.2.8; Mac Mini 1.42 10.3.6;Airport Dual Ethernet BS

Is it possible to use the ABS to connect to my BT Home Hub router wirelessly?
No. The Dual Ethernet AirPort base station (ABS) can not be used as a wireless client.

Similar Messages

Airport Dual Ethernet connecting to DSL.

My normal system is a Windows XP PC connected to 2wire dsl router from SBC. My wife has an iBook(the white one)that we are trying to get connected to the internet using an Airport Dual ethernet. THe iBook has a wireless card installed and before I moved all I did was plug the airport into the DSL router and all was well. Now what is happening is that as soon as I plug the airport into the router it I lose my PC internet connection, even more frustrating is that I still can't access the interent via the iBook.
I am totally unfamiliar with the Mac OS so this just adds to my frustration. Are there any resources/guidance/books that would help a new wireless Mac user on configuring the airport to connect to the same router as a windows PC without screwing it all up?
Any help would be awesome.
Jamie
PC Windows XP Pro Airport Dual Ethernet

Hello, I'm new to Mac's as well, but I hope I can help narrow down the source of the problem a little.
You said "and before I moved all I did was". I take that to mean you moved from one home to another. Does that mean that you also have a new DSL service provider (which means they provided you with the DSL router you are using. A couple things to try to semi isolate the problem, or at least try to narrow it down to one device having issues.
Try to connect to the internet with each computer individually using the DSL router, one at a time. Do they both work that way?
Try connecting the airport only, then connecting to the internet with each computer individually (the other should be powered down so it doesn't try to connect when wireless becomes available {hopefully}). Do they work this way?
If they work, or one does but not the other you have provided yourself wirh a wealth of information to offer the experts (no that's not me), I'm afraid I won't be much help beyond this. The reason for this method is that you may discover that something has happened to your system(s) (hopefully not) during your move(?), or your service provider (new) may have provided you with a faulty router (just a couple of possibilities).
Another thing, have you installed any new software, or updates recently, like just before the connection stopped working.
Hope this helps.

Old Airport Dual Ethernet Base Station 'Snow' - Airport Utility can't find

Hi.
I did a hard reset on this puppy, successfully.
Connected to my ibookG4 via ethernet cable (LAN port).
Doesn't show up.
Tried searching under "Configure Other" in the Utility for addresses 192.42.249.13 and 10.0.1.1 with the password 'public'.
No luck.
The old Airport 2.0 isn't compatible with my OS, so that's not an option.
Help. Please. Thank you.

If you use Mac OS X 10.4 or 10.5, download AirPort Admin Utility for Graphite and Snow 4.2.5.

Power for dual ethernet/snow airport

I have an old AirPort dual ethernet which I would like to lend to a friend who just got a MacBook but is currently using dial-up internet. The problem is that in it getting down off the shelf, I found three different power bricks, one 5V and two 12V. One of the two 12V power bricks has a light grey wire, which would be a better color match than the others. That is the only hint as none say "Apple."
What are the power requirements of this old AirPort?

12V
AirPort Base Station (Dual Ethernet) - Technical Specifications

Dual Ethernet Airport Not Broadcasting?

I have a dual ethernet Airport base station connected to a cable modem. I started having connectivity problems between the airport and my three Macs (G5, G4 Powerbook 17-inch and older G4 Powerbook 15-inch) a couple of days ago. Today none of the Macs can access the internet.
I've tried everything: using Airport Admin to reconfigure, resetting the base station, working with the cable internet ISP folks, etc. The Internet Connect interface tells me the Airport is indeed connected to the internet, but none of the Macs seem to be able to connect with the Airport. Also, hardwiring the ethernet cable to the G5 works just fine.
Any ideas?
Thanks!

I too am having the same problems with the dual ethernet airport. This happened around 3/29 as well. I have called the cable co. for dsl modem advice, the tech says its a apple problem. the apple tech says all is hooked up ok. but when the air port is connected to the dsl modem all the lights are green except the internet. will not talk to the modem. I have done a hard reset and followed all the steps.
When dsl modem is directly connected to g4 cube... all is ok.
My house has been wireless for a long time..... Please does anyone have any ideas to fix this?
KB

Can I change my Dual Ethernet Airport from WEP to WPA?

I just read that WEP wireless networks aren't really secure, even when set up as "closed," but it appears that my Dual Ethernet Airport only allows WEP networks.
Can I change software or firmware to allow me to configure the Airport as a WPA network? My firmware is version 4.0.9 which appears to be the most current available.
Thanks for any help. I'm also having the problem with a dual core machine not automatically establishing with my closed airport network if anyone is keeping track, I've got an unanswered thread about it on the intel mac page.
Also, I apologize for posting this on the Airport for Windows page, I'm using a Mac, actually several.
iMac 24" 2.16 GHz Intel C2D 2 GB RAM Mac OS X (10.4.7) wireless mouse and keyboard

Can I change software or firmware to allow me to
configure the Airport as a WPA network?
No

Dual Ethernet Airport

I have been able to configure the ABS dual ethernet using the LAN connection, but when I disconnect the ethernet cable the imac does not see the ABS. How do I get the imac to recognize the ABS or how do I connect to the ABS?
I am using airport admin utility for graphite and snow version 4.2.5. The admin utility does not show the ABS wirelessly, but will show it while connected using the ethernet cable.
I have tried doing a hard reset, but the original name remains and does not change and the soft reset does not do anything. the middle light blinks once every second and I have followed the manuals for hard and soft reset.
How do I get the computer to recognize the ABS?

If you're sure you've configured the airport to create a new network and its not showing up wirelessly, either the wireless functions of the airport or your computer are not working properly.
If you have several computers capable of wireless, check them all to see if the airport network shows up. If not, then the airport base station may be bad. (check out those new airport extremes, they're nice )
If your computer is unable to see any networks (at other locations or in your area), then the airport software/hardware on your computer could be bad. Try:
- make sure airport is turned on in OSX
- if you have an external antenna, make sure its plugged in properly
- if you have a switch on your computer that turns on/off wireless, make sure it is turned on

WDS with Airport express and Dual ethernet Airport base

Can the airport express and dual ethernet airport base create a wds? I can't find the options on the airport base's software.

coloradoapple, Welcome to the discussion area!
The Dual Ethernet (snow) AirPort base station (ABS) does not support WDS.
Only the AirPort Extreme base station (AEBS) and AirPort Express (AX) support WDS.

How Do I setup Dual Ethernet (Snow Saucer) base as "repeater" for Extreme

Just migrated from G4 iBook to an MBP. Currently still using my Snow Saucer (Dual Ethernet) airport base station (had to communicate with the Base using the iBook, and manually enter the MAC address of the MBP).
When I go to the trouble of setting up my Airport Extreme to become the base station to which my DSL line is connected, I also want to use the old Saucer as a "repeater" to get a better signal somewhere else.
Where are the instructions for doing this?
Also, I want to know if this may be a bad idea, because IIRC I read that if the Extreme detects a device using the "old" frequency, it will downgrade itself to that frequency, and I will lose the advantage of the Extreme for any devices which could make use of it.

However, extreme and express base stations can be configured to to act as relays and receivers for Graphite and Snow base stations.
With no setting or availability of WDS capability on the dual ethernet device, I fail to see how this would be possible.
Setting this up is fiddly because you have to configure the bridges to connect to an ABS via a MAC address.
And, the ABS must also be configured with the MAC address of the other devices in the WDS, but there are no provisions to do this.
If you want, I'll send you a link for MacTracker, which lists all models and specifications.
It might be possible to run ethernet from one of the other AirPorts, configure the dual ethernet version in "bridge mode" (if possible) and then have it create a wireless network. To be part of the "same" wireless network, it would need to be setup to use the same wireless network name, security and password as the "main" network.
Message was edited by: Bob Timmons

Using Airport And Ethernet Together

Having read Christopher Breen's solution to using Airport and Ethernet together,
http://www.macworld.com/weblogs/mac911/2006/10/airportswitch/index.php
I am still wondering if this can apply to my situation. I have an Airport Exteme BS distributing the wireless signal on it's own node. Nothing is physically connected to the BS except an ethernet cable running to a hub which is connected to the cable modem. While my ISP service isn't supplying service faster than Airport will manage, no problem...but, I would like to have the advantage ethernet networking between my machines for all the advantages that ethernet speed can bring to that situation.
My connection to the internet is from WAN from the cable modem. I have an ethernet connection from the BS that I can run a cable back to say, an iBook. Will this work? I want wireless internet, but ethernet for machine to machine networking.
JAL
iBook G3/500 G4/Dual 450 Mac OS X (10.4)
iBook G3/500 G4/Dual 450 Mac OS X (10.4)

Helpful response, but I am uncertain this is what I am after. First, the hub is at the other end of the house, inconvenient to run a cable to it in this way. Presently, "Distribute IP Addresses" is turned off. This is way it had to be set since the AEBS is on a separate node. I just wonder why I can't run a cable from the AEBS LAN port back to the iBook. Looking for best possible speed when networking from my studio G4 while keeping the wireless internet setting.
Any reason making the config the way I am imagining will not work?

Setup Dual Ethernet (Snow) using Windows XP

Is it possible to configure a Dual Ethernet (Snow) Airport base station using only a pc running Windows XP? If so, which version of the admin utility should I use and what's the exact process in order to get things setup?
We've performed a hard-reset but it will not allow us to update the base station using 4.2 for Windows, because there's an error connecting to it via ethernet.
Thanks!

Thanks. That has helped point us in the right direction. In addition, I found this info particularly helpful in order to set the TCP/IP settings in the Network control panel:
http://docs.info.apple.com/article.html?artnum=106685
After changing those settings, we were able to configure and update the base station.
However, after putting the TCP/IP settings back the way they were (obtain IP automatically instead of manually), the PC connected via the LAN port and the wireless can't connect to the internet at all. The base settings reveal that it's using an IP address starting with 169.xxx.xxx.xxx which tells me it can't get a real IP from the cable modem. Unplugging the cable modem, base station, restarting, etc. aren't doing the trick. Oh so close. I'll keep you posted unless you have any further suggestions.

ABS Dual Ethernet -- Error writing configuration during hard reset mode

This has been a full day of troubleshooting this one. After downloading the Airport Admin Utility 4.2.5, I was finally able to see the old ABS Dual Ethernet via ethernet cable plugged into the LAN port from a Macbook running 10.5.2. We don't know the password to login into the base station and a soft reset hasn't stripped the password from the base station.
So.. I got ABS into hard reset mode with the middle LED blinking once every second as described in the Apple documentation, and was able to seethe ABS from the Airport Admin Utility. HOWEVER, when I try to configure the ABS, I enter my Admin username and password, am prompted to temporarily change TCP/IP settings for this computer and then "Writing configuration..." comes up.. but a few seconds later I get an error message "An error occurred while writing the configuration."
That's it. No other explanation.
No idea where to go from here.
My network settings are set in Manual mode to the following:
IP: 192.42.249.15
Subnet: 255.255.255.0
Router: 192.42.249.13
Any ideas with this one?

If I understand your post correctly, "when I try to configure the ABS" in the second paragraph refers to clicking the Configure button while trying to reload base station software (i.e., step 16 in Apple's document titled AirPort Base Station (Dual Ethernet) : How to reload software from Mac OS X).
I suggest that in order to reload the base station software, you make sure that AirPort is inactive on your computer and that the manual network settings you described are in the "Show: Built-in Ethernet" part of Network preferences.
Beyond that, I'd recommend re-doing the hard reset, possibly multiple times if it doesn't succeed the first time.
On the other hand, if you successfully reloaded the base station software and are indeed trying to configure the base station's settings, then quit AirPort Admin Utility, restore the computer's Network Ethernet settings to Using DHCP, and reopen AirPort Admin Utility (steps 18-20 of Apple's document).

Can't connect to Airport over ethernet with XP Home SP3

I can't connect to Airport Base station dual ethernet over ethernet with XP Home SP3. The XP lan connection said Windows could not complete : Renewing your IP address, when i try to repair the connection. the apple Extreme Admin utility shows Base Station Information but can't configure it and said:
The Base station has been reset and is not configured, make sure your computer is configured for a 192.42.249.X-compatible IP address so the base station can be reset to its default configuration. Can any one help with this? I want to set up the airport so I can provide wifi to an IPod but i cant get XP to connect properly it said i have limited or no connectivity.

Its working now but the windows computer still cant get the aiprort base station to start a dialup connection. I dont wnat to usr the ipod for this all the time. Any ideas how to get XP to force the Airport Base Station to open a dial up connection.

Dual Ethernet will not connect if set to share Single IP address

The subject says it all. My trusty old Dual Ethernet will not connect if set to share Single IP address.
I cannot get anything but a self assigned IP address with it set to share a single IP address.
Before about Tuesday of last week I had connected to it a Mac mini, iMac, Dell Desktop, Dell Laptop, and PS3 all working fine. I think Comcast or Apple updated their system or Airport software and now the old dual Ethernet will not share a single IP address.

So far as I know, there has been no recent change in Apple's software affecting the Snow (a/k/a Dual Ethernet) base station. About 2-1/2 weeks ago, Apple distributed an update to AirPort software for Intel Macs running Tiger, but it would not have affected the base station.
Your topic implies that when the Snow is not set to share a single IP address (i.e., presumably, when "Distribute IP addresses" is unchecked in the Network pane of AirPort Admin Utility for Graphite and Snow), one of the computers is connecting to the Internet through the base station. I also imagine that the self assigned IP address you mention is the IP address of that computer, rather than of the base station, and that that computer obtains an IP address from Comcast when the Snow is not distributing IP addresses.
Assuming that that computer is connecting wirelessly, then whatever settings that computer is using for TCP/IP and PPPoE in the AirPort part of System Preferences, while the computer connects to the Internet, should be the ones used for the base station, in the Internet pane of AirPort Admin Utility for Graphite and Snow. (Most likely, it is simply "Using DHCP.") The IP address obtained from Comcast should be received by the base station, when it is set to distribute IP addresses in the Network pane, and the IP address should show up in the Internet pane. (When the Snow is distributing IP addresses, it has two IP addresses itself, a WAN IP address obtained from Comcast and a LAN IP address, 10.0.1.1, visible only to devices in your network.)
Even when the settings are correct, the Snow might not be able to obtain an IP address if your cable modem remembers the computer, which had been receiving the IP address previously. You'll probably need to shut down the computers and unplug power to the base station and cable modem. After waiting 5 minutes, restore power to the modem, then after another 5 minutes, restore power to the base station, then after another 5 minutes, start up a computer.

Changing nat settings to open on basestation (dual ethernet) for xbox 360

i have a airport basestation (dual ethernet) and i have my xbox 360 plugged into the back using a ethernet cable and i have tried everything i know to open the nat(network address translation)
settings and i tried everything i know to open a port but i am appearantly doing something wrong.... can anyone help?? please... my xbox connects to xbox live but i can play with very few people because of the nat setting.... suggestions?

jfinley1, Welcome to the discussion area!
This "open NAT" is a relatively new thing not supported by the dual Ethernet AirPort base station (ABS).
How have you tried to map/forward/open a port?

Airport Dual Ethernet

Similar Messages

Maybe you are looking for