Airport Exp. USB and photo card reader

My express works fine with Itunes, wireless printing, but does not seem to recognize my universal card reader for digital camera . ( I take the card out of the camera, and insert it into the reader. It works fine when plugged directly into the conputer USB. Thanks for any help.

The AEX's USB port can be used for a printer. It is not intended for any other device.

Similar Messages

USB and Media Card Reader disabled after installing DM

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
Please tell me that I don't have to wipe the whole computer and start again.. Please!!
neuralgroove

About the SD and SDXC card slot
Mac 101: Connect your camera or camcorder
Which os are you using? If Lion - OS X Lion: Use an SD card
If another os please research Apple's Knowledge Base for troubleshooting suggestions pertaining to your os.
iPhoto '11: SD card
"We're sorry, but the Safari browser version you are using does not support the community toolbar" I'm not sure if all of these problems are related.
Post in the Safari community.
Mac Book Pro (around 18 months old)
If no other troubleshooting solutions are forthcoming and you have AppleCare, give them a call and get a case number. Otherwise,
take the computer to an Apple store or an AASP. Whichever is more convenient for you to get a proper diagnoses of what is actually going on.

Installing DM knocked out all USB and Media Card Reader

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
neuralgroove
Kudos! Thanks!

I installed the DM 4.3 from the CD tonight. Hooked up the BB and everything worked fine. Loaded some music onto the media card and downloaded some pictures. Then I unhooked to see if the music was on the Blackberry, when I hooed it back up, it wouldn't recognize. I tried a few times, then uninstalled the software, re-installed, still nothing, then un-installed and downloaded 4.7 and installed, still nothing, now my computer doesn't recognize ANY USB ports (web-cam, Media Center Remote) and none of the Media Card reader drives are visible in My Computer. When I insert the SD card from my camera, nothing. I uninstalled 4.7 and still nothing. Now I'm worried..
neuralgroove
Kudos! Thanks!

HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
Any other setting needs to be changed?

Hey, thanks for your updates.
The photos are 8 character long and extension is .jpg
The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
Can you advice.

Token and smart card reader are not detected on Mavericks if not plugged on a USB port during system boot

Well, both token and smart card reader are not detected on OS X 10.9 if not plugged on a USB port during system boot. So, if I am already working within the system and need to use my certificates I have to plug the token or smart card reader on a USB port and restart Mavericks.
Token is a GD Starsign and Smart Card Reader is a SCR3310 v2.
Thoughts?

SCS is a very good app, since I've read that Apple has discontinued support for PC/SC interfaces after the release of Mountain Lion.
(My previous installation was a Mavericks upgrade from Lion)
However, I don't know what and how to debug using Smart Card Services. Do you know any commands to use?
Apparently, the SC reader reports no issues: the LED is blinking blue when no smart card is present and becomes fixed blue when a smart card is inserted – according to the manuals, this shows that there is correct communication between the OS and the CCID reader.
I don't know what to do; I'm beginning to hypothesize it's a digital signer issue. In fact, my smart card only supports one application called File Protector (by Actalis) to officially sign digital documents. This application seems to have major difficulties in identifying the miniLector EVO.
The generic and ambiguous internal error comes when I try to manually identify the peripheral.
Athena CNS is one of the Italian smart cards and is automatically recognized and configured (so it's correct – no doubts about this), while "ACS ACR 38U-CCID 00 00" seems to be the real name of the miniLector.
(I'm assuming this because System Information also returns that the real manufacturer is ACS... bit4id is a re-brander)
However, when I click on it and then tap OK, it returns internal error.
As first attempt, I would try to completely erase&clean File Protector files to try a reinstall. Then, if this still doesn't work, I'd debug using the terminal.
So:
- Do you know any applications to 100% clean files created by an installer?
- Do you have in mind any solutions that I might have forgotten?
Thanks in advance from an OS X fan!

SD photo card reader is not working; not recognized by PC (HP Envy 700-414) running Windows 8.1

My SD photo card reader suddenly stopped working - I get an error message to the effect that USB device not recognized. How do I get this working again?

Hello @mnskier,
I understand that your SD Card Reader has stopped working. I think you should do a backup and recovery of your computer to ensure that you do not have a hardware issue. The best way to do that is to replace the software so you have ruled out settings or a bad driver as possible causes. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Panic when using USB 2 multi card reader

On 2 different intel iMacs, I've got the following error using a USB2 Multi Card Reader (Shows up as a Mass Storage Device under Sys Pref):
IOUSBMassStorageClass has corrupted the registry
Registry - am I running windoz or something??!?!?!
I've used this multi card reader on my G4 for a long time and never had any problems with it. On these 2 different intel iMac's it often stops importing my photos, and sometimes won't mount my memory stick cards. One one occasion I got the black/gray screen telling me to restart my computer, and that's when I got the message above. Yes, I've tried other memory cards, and a different USB cable... and at times I still loose communication with the card reader.
Any suggestions would be great.
Thanks!
24" iMac 2.16 GHz Intel Core 2 Duo at Home! Mac OS X (10.4.9) 17" iMac 1.83 GHz Intel Core 2 Duo at work!

Hi, is your card reader Mac Intel compatible? which manufacturer?
I would Repair Permissions then Turn Off. Disconnect everything except KB/M
restart - I would run OnyX..then Turn Off, connect all your usb & firewire - including card reader if mac compatible! Restart..L

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

PCMCIA card and CF card reader features in HP Envy-15 Notebook

Hi this is Thrived, I am looking for High end notebook. thats how I latched on to Envy-15 model. But I want PCMCIA card and CF card reader facility. Is it possible? and How? Please suggest me an answer.

All possible options would require an external device. There are a lot of usb card readers which still have a CF slot and as for pcmcia I have seen an Expresscard to Cardbus adapter out there but it is a big thing that sticks out the side.

How do i get a USB Omnikey 3021 card reader to work?

I am trying to figure out how to make my USB Omnikey 3021 card reader work with my Macbook Pro. Please help.

You don't state the nature of your trouble but checking the vendor's web site I see there is a driver for 10.5 and 10.6 Mac OS but not one for 10.7. So perhaps you sneed to contact the vendor hidglobal.

How can we interface external usb camera or usb device(storage, card reader) to Ipad 2.What all things are need(any development Kit apart from IOS sdk)

Hi,
Before going any further in my research, I want to know the views and opinions about the intent of my work I am about to start.
AIM : I am trying to interface an external uvc camera with the ipad 2 and iphone .Just like in android there is a node(in unix and linux everythign is a file)which gets created in the /dev/ directory which can be accesses by the application using the native interfaces (JNI) and finally via the android code.I am trying to develop the similair application for the ipad 2 and iphone.
Can some one plz point out :
(1) How I can interface external hardware like ( external uvc camera) or any other USB device(a card reader, a storage device, a barometer etc)
(2) I have googled about Apple's Authentication chip which can be used to interface the external h/w.Can some one point out how useful it is.Is this related to that somehow.
(3)What are the things similair to JNI, node, /dev/ in the IOS for Ipad 2 and Iphone.
I will be highly obliged ,if some one could provide me the top pointers on it.
Thanks and Rgds,
MangoApple

1.) See
External Accessory Programming Topics
Connecting to an Accessory
Monitoring Accessory-Related Events
2.) See the MFi Program

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Booting from USB Flash Memory Card Reader on RS480M2-IL (Test Results)

I just completed testing my USB Flash Memory Card Reader (see profile) as a boot device and wanted to provide feedback to the Forum.
A UBS Flash card will show-up on the Advanced Bios Features menu, Hard Disk Boot Priority list, when a Flash card is physically present in a card slot. It showed as "USB-HDD0 : AFT PRO -8MX CF 0" with a 256MB Compact Flash (CF) card for my test. Using the enter key on the Hard Disk Boot Priority list allows for ordering priority, which was necessary to place the CF Drive before my real Hard Drive for the card to boot. When the card is removed, it drops from the list.
I initialized my CF card as a DOS system disk using HP's USB Disk Storage Format Tool v2.0.6 for the test.
Since it is recognized as a Hard Drive, it boots as the C: drive, not A/B Floppy alternative.
I also ran a quick test to see if XP Pro Setup would see the drive. It does show as my D: drive partitioned FAT. Too small (256MB) obviously for XP Pro install, but it does present opportunity for larger size flash modules. My Flash Reader actually has 4 different disk functions/slot groups, so XP Setup acknowledge the presents of those empty three slot groups as "Unknown Disk" on the drive list.
I hope the information is useful for anyone planning a build or looking for alternative boot methodolgy with the board.
This board just gets better and better.
Danno

So with a nice size flash memory u could start your box with a key drive and lock up your computer when you leave it unattended.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Importing photos from camera usb / no sd card reader yet

recently bought light room and it seems i cannot import my photos when i connect my camera directly to computer. I have not purchased a card reader yet. any help would be great

HELLO DOC1111 !
Please be aware that the Apple iPad 2 does not have an SD card reader either.
And before you go to the Samsung community forum, the Samsung Galaxy Tab does not have an SD card reader either.
Please go buy a Motorola Xoom if the SD Card reader is among your requirements.
And please do not use red.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Airport Exp. USB and photo card reader

Similar Messages

Maybe you are looking for