Airport Expr. Device not found. The AE does not connect to my MB Pro with OSX 10.8.5 for most of the time?

Hi,
yesterday i bought the new AE Basestation to stream my music wireless. Sometimes my Airport Programm can find my AE but most of the time not.
I connected the AE wireless to my WLAN Router, might there be a problem?
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text.  Put a short description of your problem in the subject field and save the rest of your message for the body field.

Similar Messages

  • TS3212 I cannot get the new iTunes to start in Windows Vista. I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.

    I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.

    Read this:
    iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

  • TS1369 The article on what to do if Ipod not found by iTunes does not offer the correct solution....

    I had this problem with two different iPod nano's that I bought for my kids.
    The iPods would not be recognized by iTunes. They would throw an error message about how the ipod was not being recognized correctly. It was computer specific, since they were recognized by other computers in my house. All other USB devices worked fine on the PC the nanos were not working on.
    After wasting hours following the instructions that came up with the link (reinstall itunes, run trouble shooter, etc etc), I finally determined that the actual apple driver was not loading, in that it was not showing up in device manager.
    So, I clicked on the USB device that was showing a yellow exclamation mark, told it to update its driver and I had a disk, pointed it to common, apple, drivers, and voila a different ipod "device" showed up in device manager. After rebooting, everything was fine.
    The steps to resolve this type of issue should include this approach as well...near the top, to head off others from the hours of annoyance I experienced.

    - Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    - Tried another cable?
    - Tried another computer?
    If still problem time for an appointment at the Genius Bar of an Apple store.

  • I want to replace the hard drive on my 15inch mid2012 macbook pro with a SSD but I just cannot clone the HD or reimage the SSD and I've tried everything. Please help...

    What can i do to format, image and use the SSD as the primary drive on my macbook pro?

    Install the SSD in an enclosure and connect it to the MBP via USB.
    Open Disk Utility>Erase and format the drive to Mac OS Extended (Journaled).
    Then select Disk Utility>Restore.
    Drag the internal HDD to the Source field.  Drag the SSD to the Destination field.  Click on the Restore button.
    This may take a few hours depending upon how much data has to be transferred.
    When complete, Boot the MBP with the OPTION key. 
    Select the SSD and if it boots the MBP, swap the two drives.
    Ciao.

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • If in my Hardware section of System Information, when I select Thunderbolt and the reply is:    Thunderbolt: No hardware was found,  does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached?

    If in my Hardware section of System Information, when I select Thunderbolt and the reply is:
      Thunderbolt: No hardware was found,
    does that mean the computer does not contain Thunderbolt or that no Device using Thunderbolt is attached and that the computer does have thunderbolt?
    I have Lion and both my Mini Server and Macbook Pro are less than a year old, however both were bought from Apple as reconditioned units so they might be older, and I expected they would have Thunderbolt but when I connect a Black Magic Intensity Extreme unit which is a thunderbolt powered and driven Device using a Thunderbolt Cable to either computer, it is not recognized.

    No other information in Sys Info and I guess as both units, Mini and MBPro, were reconditioned, they were pre July and February , 2011, respectively. 
    I don't suppose there is any way to add Thunderbolt or USB 3.0 to prior generation Mac Products or get similar performance.

  • HT1843 hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?

    It isn't supposed to pair with the MacBook.  You can use WiFi to connect but not Bluetooth.  You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
    The communications are rather limited.

  • I told my wireless network to forget two airport expresses so that I could rename them.  Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station.  Does "forget" mean forever?  How to reset?

    I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them.  Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station.  The network does recognize a totally new 2nd gen express.  Does "forget" mean forever?  How to reset?

    The network does recognize a totally new 2nd gen express.
    Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
    Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
    Assign a simple name.....something like     2ndGenExpress

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

    Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

    I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • AZURE The specified certificate could not be found in the LocalMachine certificate store,or the certificate does not have a private key.

    Hello,
    I try to make a HV website in Azure. It took me hours to figure out how to make a HV certificate with my own password. But I figured it out. With the HV application manager I uploaded the certificate to the HV platform. This worked fine. Then I created a
    c# project with also works well on my local machine.
    This is the code I use in the web.config
    <appSettings>
    <add key="ApplicationId" value="24ee15be-1497-4719-ad70-d1223adbf021" />
    <add key="ShellUrl" value="https://account.healthvault-ppe.co.uk/" />
    <add key="HealthServiceUrl" value="https://platform.healthvault-ppe.com/platform/" />
    <!-- when we call the SignOut() method on HealthServicePage, it redirects us to the page below -->
    <add key="NonProductionActionUrlRedirectOverride" value="Redirect.aspx" />
    <!-- The redirect page (specified above) uses these keys below to redirect to different
    pages based on the response from the shell -->
    <add key="WCPage_ActionHome" value="default.aspx" />
    <add key="WCPage_ActionAppAuthSuccess" value="default.aspx" />
    <add key="WCPage_ActionSignOut" value="SignedOut.aspx" />
    </appSettings>
    Next step is to deploy the site to Azure. I was able to upload the certicate to Azure.
    After deploy I get the following error:
    System.Security.SecurityException: The specified certificate, CN=WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021, could not be found
    in the LocalMachine certificate store,or the certificate does not have a private key.
    I checked the certificate on another server with a different key in the web.config
    <add key="ApplicationCertificateFileName" value="c:\Zodos\website\WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021.pfx"/>
    This gives me this error:
    Exception Details: System.Security.Cryptography.CryptographicException: The specified network password is
    not correct.
    So the procedure I followed definitely was not correct:
    It works on my local machine
    It doesn't work on another server or on Azure
    I can see that the procedure I follow is not correct, but what am I doing wrong?
    Wilfred

    I am having the same problem. I see I have updates thru the Mac App Store but when I try and run the System updates in the Mac App Store it errors out. But I can update third party apps.
    Have even tried going thru Terminal to check for software updates but still have same error claiming it can not find the hostname server.
    Jefre

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • I am trying to get the music content on my Mac onto my iPhone. When I connect the devices, the computer does not seem to recognize the iPhone, i.e., on the open itunes window, the iPhone is not seen as a connected "device".

    I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".

    Hi,
    See Here
    iPhone, iPad, or iPod touch not appearing in iTunes
    From Here
    http://www.apple.com/support/itunes/devices/
    Also...
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538

  • The iPad does not ship unless he closed  ITunes does not recognize or computer  If he shipped fully closed device  I bought a charger and bought Link and the same problem persists  IPad without Jelbrak

    The iPad does not ship unless he closed
    ITunes does not recognize or computer
    If he shipped fully closed device
    I bought a charger and bought Link and the same problem persists
    IPad without Jelbrak

    What do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
    If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
    device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
    on a Mac : http://support.apple.com/kb/TS1591

Maybe you are looking for