AirPort Express (2nd gen), share internet wireless and wired in the same time

If I use my AirPort Express (2nd gen) and I connect the modem in WAN port, and a switch in the LAN port (this swich connect a computer and a NAS wired), can I share the internet wireless and via LAN and the same time?, the wireless devices and the wired devices would be in the same network?.
Thanks.

Thanks!

Similar Messages

  • If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?

    If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?
    Or just one device(room) at a time?
    It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
    Is this possible with all apple products?

    From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

  • Internet Sharing and AirTunes at the Same Time?

    I've seen similar posts on this question, but none exactly on. I think I have a fairly basic situation.
    I'm using my G5 as a base station to broadcast Airtunes to another room. G5 is connected to the Internet via cable modem. Using Airport Express as receiver.
    Now, I just bought a powerbook and want to use the G5 for wireless internet access by the PB. But when I turn on internet sharing on the G5, it seems to cut off/shut down the airtunes network. Airport icon looks quite different. Conversely, when I get the airtunes working, the sharing can't be turned on.
    Anyway to sort this out so that I can run both at the same time?
    thanks
    G5   Mac OS X (10.4.8)  

    I believe, in theory, you should be able to do this. I am assuming from your description the G5 is connected, via Ethernet, to the cable modem and you want to use Internet Sharing to use it's wireless to commuicate with both the AX and the PowerBook. I think if you set up Internet Sharing and add the AX as a "wireless client" this may just work.
    Let's double-check your settings...
    To setup for Internet Sharing (Wired to Wireless):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    - Click Stop to start the software firewall
    Setup the Network
    Cable Modem > (Ethernet cable) > [Ethernet port] Mac_#1 > (wireless) > Mac_#2
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    - Verify that "AirPort" and "Built-In Ethernet" are enabled.
    - Verify that "Built-In Ethernet" is at the top of the list, followed by "AirPort".
    - Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > Built-In Ethernet > TCP/IP
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    - Share your connection from: Built-in Ethernet
    - To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    - AirPort Options
    -- Network Name: <anything you want>
    -- Channel: Automatic
    -- Enable encryption (using WEP) (optional)
    -- Password: (optional)
    -- Confirm Password: (optional)
    -- WEP Key Length: (optional)
    -- Click OK
    - Click Start
    To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    - Wireless Network: <select the Internet Sharing wireless network>
    Music tab
    - Enable AirTunes on this base station (checked)
    - Enable AirTunes over the Ethernet port (optional)
    - iTunes Speaker Name: <whatever you wish>
    - iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    - Look for remote speakers connected with AirTunes (checked)

  • WRT54GS Wireless and Physical at the same time?

    Hi, Stupid question??? Can my internet be shared between wireless and physical connections at the same time on the same router, because there not at the moment? Please help, any body? Cheers, Carl

    This is my scenario below!!! It makes no sense i tell ya ;( Brought me a nice WRT54GS today so i could play my nintendo ds and wii online... Got those two set up wirelessly and my xbox and pc plugged in to port one and two on the back! Now i spent 4 hours today trying to get my ds and wii working with no luck and almost took the router back to pc world! But when i shut down my pc my ds and wii could all the sudden connect to the internet and when i turned on my xbox my ds and wii lost the connection... I've looked everywhere online and checked everything software wise for the router... Any body have or had the same problem out there! Cos i'd really like to know why i cant use my wireless side of my router with the plugged in stuff at the same time ??? Cheers carl

  • Why does my ipod touch (2nd Gen) 32G randomly stop playing while at the same time the volume control slider dissappears?

    It randomly stops playing after as little as 7 seconds and as much as 2 minutes.   To resolve the problem I began removing and reinserting headphone jack.  This sometimes rectified the issue, but inevitably it would stop playing again.  I have blown air into the headphone jack receptical and powered down the product but neither action has permanently corrected the problem. 
    It has been a couple of months since it was last restored.
    Any thought on why this has just started to happen.  Does it need to be repaired by Apple?  The item was purchased in Sept 2009.

    It is possible you have a faulty lock/power button. One of my friends iPods did this. See if a faulty lock/power button is covered by your warranty if you don't have a warranty you might have to pay a pretty penny to get it fixed. When the screen flashes does it go black and come back at the lockscreen? If so it is very much the lock/power button.

  • Can I have wireless AND wired speakers at same time?

    Currently I have my iTV connected to my flat screen which plays sound through a wired receiver connected to my stereo speakers. So right now when I watch movies or play music through my iTV (or even regular TV), it comes through the TV speakers and my stereo. This setup is in my den/tv room.
    However, I want to add an ADDITIONAL wireless speaker(s) in my living room (a separate room where everyone hangs out when not watching tv). I saw some wireless speakers in Costco this weekend, but Im skeptical that i can get them to work so the wireless speakers are working AND my current wired configuration is working.
    Before I go making a purchase - has anyone else done this - is it possible? Im concerned the iTV will have me select an either/or situation with the speakers - not multiple wired and wireless options.

    Creative Cloud Help /  
    Install both CC and CS6 apps
    Can I install both CC and CS6 apps with my Creative Cloud membership?
    Yes, you can download most CS6 apps from the Download Center on creative.adobe.com. Click any app icon. From the product download page, for example Illustrator, look for the heading "In this version" and click the version pop-up menu beneath it to select CC or CS6. The large blue Download button at the top of the page changes to "Download CS6".
    Note:
    It is fine to have both CS6 apps and CC apps on your computer. Some users require multiple versions for different clients, etc. It's a personal preference, but in no way is a requirement to uninstall your CS6 apps in order to install CC apps.

  • Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability

    Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability
    When all configured to provide wireless the network (Wired/Wireless) become unstable and very slow. When I disable wireless on the Airport Express the problem disappears. The problem effects all endpoint clients (iPhones, iPads, Mac's and windows) Any ideas?
    I own the following
    Airport Express 802.11n (2nd gen)
    Airport Extreme 82.11ac
    Airport TimeCapule 802.11n (3rd Gen)
    Config
    Each of the Airport's WAN port is connected my AT&T Uverse modem
    Latest firmware on each device
    All use static IP's (192.168.1.x)
    Airport's are all configured to "Create a wireless network" with same network name, security and password.
    Wireless options are using Automatic for Radio's and Channels
    Router mode is "Off (Bridge Mode)"

    ragu75 wrote:
    Config
    Each of the Airport's WAN port is connected my AT&T Uverse modem
    Don't do that. Decide which one of your AirPort Base Stations is to serve as your router. Connect that one, and no others, to the modem. Connect all the others to it, and configure them as bridges.

  • Airport express 2nd gen best setting? plz help!

    My airport express 2nd gen setting right now are Radio mode is 802.11a/n - 802.11b/g/n (Automatic) 2.4GHz Channel (Automatic) 5GHz channel (Automatic) I use it as my main router i used it for my macbook pro, macbook, ps3, ipad 4, iphone5s, and iphone 5. What the best setting i should use and sometimes when ever someone use the microwaves it knock off my singal so can someone plz help me with that also? Thank you!!

    Microwave oven operate in the 2.4 GHz band. Unfortunately there is not much you can do if your current one does interfere with your Wi-Fi network on this band.
    Some options are:
    If capable, connect your wireless clients to the 5 GHz radio.
    Relocate the base station farther away from the location of the oven.
    Replace the current oven with a newer model that does not "leak" any microwave RF energy.

  • Downgrading Airport Express 2nd gen. to 7.6.1

    Hi there,
    I've just acquired another Airport Express today, 2nd gen., replacing a 1st gen. (n draft version) because of dual-band capabilities. Like other people, I have trouble with firmware 7.6.4 when playing music over AirPlay and optical to external DAC (see e.g. https://discussions.apple.com/message/19806591). I hear frequent high-pitch high-volume glitches, which ruins the listening experience. My 1st gen. could downgrade to 7.6.1 through AirPort Utility, but I can't do that with the 2nd gen. The message is "The selected firmware file is not compatible with this AirPort base station." I got the file as detailed on this site: http://www.laszlopusztai.net/2013/02/11/downgrading-airport-extreme-to-7-6-1/ (I tried all of them called 7.6.1.)
    TL;DR: Is there any way to downgrade AirPort Express 2nd gen. to firmware version 7.6.1 so that optical out to a DAC works again?
    Thanks!

    Tks for the info.
    I read tons and tons of posts here... have the same problem : can't downgrade from 7.6.3 to 7.6.1 because my airport express has been shipped with the 7.6.3 firmware version (how lucky ! ;-(
    And no way to manually install the 7.6.1 binary as well (found here : http://www.laszlopusztai.net/2013/02/11/downgrading-airport-extreme-to-7-6-1/ see comments) when using the option key (option "Other").The install failed.
    So, no solution at all ?? This is crazy !
    Message was edited by: Fredolinho
    Message was edited by: Fredolinho

  • Airport Express (2nd gen): Radio Mode & Channel Set-Up

    Hello,
    I am hoping somebody can help me with an Airport Express question.
    I have recently purchased an Airport Express (2nd gen) and iPod Touch (4th gen) to stream music. I experience connectivity problems when my neighbour’s WiFi is turned on. When their WiFi is on my iPod rarely can detect the Base Station and when it does detect it - it cannot connect. The Airport Utility cannot detect the Base Station either when their WiFi is on. Yet when they are away and their WiFi isn’t turned on I have no problems and the system works absolutely perfectly.
    I gather that I can change channels but I am looking for some advice on how to do this.
    In work (because I can open the Airport Utility there –as there is no interference) I connect using the Airport Utility I have found the following options:
    Radio Mode:
    5 GHz Mode:  Automatic mode, 802.11n (802.11a compatible) or 802.11n only (5 GHz Mode)
    2.4GHz Mode: Automatic mode, 802.11n (802.11g/g compatible) or 802.11n only (5 GHz Mode)
    Radio Channel:
    5 GHz Channel: Automatic or four channels (36, 40, 44 or 48)
    2.4GHz Mode: Automatic or choice of eleven channels
    There are dozens of combinations using Radio Modes (5 or 2.4 GHz, manual or auto, 802.11a compatible) and Radio Channels (4 options using 5GHz and 11 options using 2.4 GHz).
    Where should I start? Both radio mode manual and also manual channels? The possibilities seem endless!
    Can someone please help?
    Thank you.

    Hello, Tesserax,
    My apologies if I have breeched community etiquette in asking for your advice.
    I use a second generation Airport Express base station, Ethernet fed with category 6 cable, Radio Mode locked to 5 GHz for best data throughput, the station close to my iPad. The set up has improved YouTube video streaming performance significantly. No streaming freezing so far.
    Are my base station's WiFi Settings are correct?
    This is what I have done via iOS AirPort Utility -
    Edit > Advanced  > WiFi Settings > 5 GHz Name: AirPort Lounge -
    Radio Mode > Manual > Automatic Off > 5 GHz Mode > 802.11n only (5 GHz) > 802.11n only (5 GHz) ticked. Automatic off to allow access to 5 GHz only.
    Radio Channel > Manual > Automatic On > 5 GHz Channel 149. Automatic on to allow switching between 5 GHz channels.
    Regards, Ken

  • I have a 2nd-gen iPod from 2002 and recently broke the AC power adapter. Specifically the removable AC plug section. Is there a way to get a replacement?

    I have a 2nd-gen iPod from 2002 and recently broke the AC power adapter. Specifically the removable AC plug section. Is there a way to get a replacement?

    Have you tried Googling for it yet?  There are numerous third party service centers and repair shots that offer replacement parts and such for all models of iPods.
    B-rock

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • Wi-fi connection on HP Deskjet 2540 and network at the same time?

    Hello
    Please can you tell me how to keep my connection to my wi-fi printer whilst connected to my Virgin Media Broadband? Every time I want to print I have to switch off the Virgin network connection and connect to the HP Deskjet Wi-fi, and then switch it back again to Virgin to browse or send emails.
    Thank you for your help
    AC33 

    Hey there @AC33 Welcome back
    I understand you are looking to install your printer on your network, so you can use the internet and printer at the same time. By the sounds of it, you may be connecting the printer currently, using the Wireless Direct feature, which will only allow you to connect to the printer or the network at a time. Basically, the printer is acting like a network.
    Here is a link for you to check out. It will help you install the printer on your network:
    Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2...
    I hope this helps you, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • IP over Firewire and ethernet at the same time?

    Is it possible to use both IP over Firewire and ethernet at the same time?
    I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
    I am using 10.5.1 on both machines.
    G5, 1.8 GHz, 15.GB RAM
    MBP, 2.4 GHz, 4GB RAM
    Thanks!

    Certainly.
    In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
    Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
    I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
    Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

  • Error Running Oracle Apps and Discoverer at the same time

    Hello,
    We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
    The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
    As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
    Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
    Thanks in advance for your help,
    Carlos

    Hi Michael,
    I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
    I should have put my comment in context :-)
    a.) I was only stating that it was possible
    and
    b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
    I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
    I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
    I would be glad to discuss anything privately.
    As for the issue at hand, I can reproduce the problem and here is what is occuring.
    I have EBS 11i configured with Jiniator 1.3.24
    I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
    1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
    2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
    What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
    a.) Sun Java Plugin or
    b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
    then you may get this conflict.
    It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
    You can workaround the situation by:
    a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
    b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
    c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
    I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
    Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
    See:
    http://blogs.oracle.com/schan/2006/04/18#a23

Maybe you are looking for