AirPort Express 802.11g and WDS

The other evening I spent two hours unsuccessfully trying to add an AirPort Express 802.11g as a WDS remote station to an existing AirPort network hosted by an 802.11g AirPort Extreme. The computer was using Mac OS X 10.5.4 and AirPort Utility 5.3.2. I believe both AirPort units have the latest firmware.
I've been able to do this in the past elsewhere, but it seems like every time I try this, I'm successful despite my efforts instead of because of them.
The AirPort Express Setup Guide 5.1 (http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide5.1.pdf) doesn't offer much help: "Open AirPort Utility and follow the onscreen instructions to extend the range of your AirPort Extreme or AirPort Express network."
Apple's online support doesn't help much either. This knowledge base article (http://support.apple.com/kb/HT2044) discusses the AirPort Admin Utility, not the AirPort Utility. The feature to "auto configure as a WDS remote base station" that seemed to make this so easy with AirPort Admin Utility had is gone from AirPort Utility.
Can anyone offer any advice about how to make this work? I've stumbled across some advice like making sure that the channel numbers are the same on both stations, but it would be nice if some Apple document had the computer story in one place. It would be even nicer if AirPort Utility had the same "auto configure" feature that the AirPort Admin Utility had.
Thanks for any advice.

I realized days later that I already had the information I needed. The electronic book "Take Control of Your 802.11n AirPort Extreme Network" (from http://www.takecontrolbooks.com/airport-n.html ), which I already owned, notes that the following items much be set the same on both AirPort stations:
- radio mode
- channel
- base station password
- wireless security method
- wireless password
I think my problem is that one station was set to a specific channel while the other was set to the default choice of "automatic".

Similar Messages

Old Airport Express (802.11g) and Intel Core 2 Duo iMac (802.11n)

Hi guys!
I used to have an iMac G5 with *Built-in 54 Mbps AirPort Extreme (802.11g)*
Then I bought an *Airport Express* and I am sure that by the time it was still an *Airport Express with (802.11g)*
Now that I have a brand new new iMac that is *Intel Core 2 Duo iMac (802.11n)*
Will I have problem trying to connect it to the Express because it is n and not g?
Thanks!

No. The Airport Extreme card in your iMac automatically negotiates 802.11b/g/n. It will work just fine with the Airport Express.

Xbox 360, My Airport Express 802.11g, and my ever more looming suicide...

I hate working on networks, especially when it comes to making Xboxs work on em. But Im a slave to live and I MUST have it. Now I have connected flawlessly to linksys routers, but this Airport is making want to take my cranium and bash it into the sidewalk until the blood drains from my skull, resulting in my inevitable and permanent resting state. So it goes...
Ok, I'm not going to kill myself, but christ will someone help me out here?
Heres what I got on the Network screen
IP- 10.0.1.2
Subnet- 255.255.255.0
Router/Gateway/Whatever- 10.0.1.1
DHCP- is set to automatic
I have 2 Macbooks connected to this router, they work fine, as well as 2 iPod touches
On the Xbox360
-IP set to automatic, given 169.254.100.112, I assume this was assigned by the router, but this makes no sense because when I run diagnostics I get IP Address Failed. THIS IS THE MAJOR ISSUE IM ADDRESSING RIGHT NOW... But I assume DNS is gonna fail even if I get IP going. I could use all the help I can get y'all.
Subnet- 255.255.255.0
Gateway- 10.0.1.1
DNS- 10.0.1.1
Wireless mode 802.11g
Network- vargas
Network type- Infrastructure Channel 1
Security WEP.
I hate life.
This is not working. I have called my genius bloody uncle, and even he seemed stunned at the matter. This is ridiculous... I hate it so much. Hours I've wasted for nothing. Someone, anyone, if youre reading this and you think you can help, please, please...

Added note, I'm running tiger OS X 10.4.11. I think I have an airport express, its my step dads. I think. I wanna say I wanna manually assign IP to something like 10.0.1.10 but I already tried that. To no avail. I've tried restarting the router and xbox and nothing really works.

Airport express 802.11g and 802.11n?

Hi whats the difference between these two? can they both work for my itouch and mini mac?

The 802.11n protocol is newer and faster than 802.11g; click here for more information. The iPod touch and Mac mini will be limited to 802.11g.
(33412)

My airport express 802.11g won't connect to my mac mini

Hi
I have recently purchased an Airport Express 802.11g and I can't get it to connect to my Mac mini. It shows up in the wifi menu at the top of the screen but when I click on it it says
This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information.
Can anyone help?
Huntymc

Have you tried restarting the system? Many times that will resolve the issue?
If you are still having problems do you have a USB mouse that you can use to open the Bluetooth preferences and then either reconnect to the mouse, or delete the pairing, then reconnect to the mouse?
The following article may help:
http://support.apple.com/kb/TS3048#1

Airport Extreme 802.11n and WDS with 802.11g express

I have an 802.11n Airport Extreme that I have been using with my AppleTV. I have it set to allow for 802.11b/g, since I have an old Powerbook Titanium that cannot be upgraded.
I recently decided to add my Airport Express 802.11g to the mix to act as a bridge for a remote, wired computer. I did this by enabling WDS on the Extreme/Express.
My question is this: by enabling WDS on the extreme, will the AppleTV still be able to connect at 802.11n speeds, or does it get pulled back to 11g? Is there any way to verify/check this on either the Extreme or the AppleTV?
Thanks,
keith

You can check the connection speed of each wireless client attached to a base station using Airport Utility. Launch Airport Utility, click on the Airport button in the toolbar. On the Summary tab you'll see an item called Wireless clients. It shows you how many wireless client devices are connected to that base station.
Click on the words Wireless Clients and you'll get a graph and a list. The graph shows the signal strength of each client. The list shows the client's wireless MAC, the signal and noise levels and the rate at which each device is communicating. On my Extreme-n base stations, I regularly see rates from 1 to 130 and everything inbetween. It looks like each device runs at it's best rate based on signal strength and error rate.
Assuming you know the MAC of your Apple TV (it's on the serial number label) you can see what wireless data rate it's getting this way.
The thing I've noticed is that my Extreme-g base stations seem to connect to clients at higher average rates than my Extreme-n units. In other words, on the g units I'll see more clients at 54 (the max) or 48 and on the n units just a couple will connect at 130 or 54 but most are at lower rates like 27 or 11 (even 2 or 1), even when they are in the same room as the base station.
I find that very odd and would like to understand it. Anybody have any ideas?

Airport Extreme 802.11n and AirPort Express 802.11g on same network. Speed?

I am migrating all our Macs to 802.11n. I will have a new Extreme 802.11n base station, and all Macs will be newer models with 802.11n. However, I have an older Airport Express 802.11g that we use for the shared printer.
I have read that the ENTIRE network will run at the speed of the slowest device. Is this true? I know that the printer can only communicate at g, but will I also see the macs having to slow down to g? If so, I will upgrade to a new Express.

I have read that the ENTIRE network will run at the speed of the slowest device
That's not exactly true, but it will certainly degrade the network. A new Express (N) is your best solution to maximize the speed of your network.

Airport Express 802.11g Not Cooperating

So for the longest time I had an Airport Express (802.11g) connected to my Time Capsule (802.11n first gen) with an xBox 360 hooked up to the Express via ethernet cable and it allowed my 360 to access the internet so I could use Netflix and whatnot. A couple of months ago the Express stopped working well and constantly had to be disconnected and reconnected to its power supply in order to function properly. Now it has completely ceased to work, so I restored it to factory defaults and nothing is working. First I tried to just have it join my wireless network, but once it connected the ethernet port stopped working. I didn't remember this happening before, so I went online and found out that joining a wireless network disables the port for some reason and that the only solution was to set up a WDS. So I tried this with my Time Capsule as the main and my Express as a remote (note: I am using Airport Utility 5.6 so that I can actually detect my Express) and on the Airport Utility Window it says that everything is fine and that both devices are reporting "Normal" as their status (green light). That is true for the Time Capsule, but the Airport Express keeps flashing its amber light of doom. When I clicked on the status for the Express, it said that the Express wasn't reporting any issues, so I have no clue what to do. Both devices are on the same channel, and the Time Capsule Radio Mode says that it is compatible with 802.11b/g devices. Also, the Airport Express, even though I selected "Allow Wireless Clients" cannot be accessed unless I connect it to my computer with an ethernet cable. Does anybody know how I can fix this? Any help at all is appreciated. Thanks!

UPDATE: I reset the unit, and was able to configure it using AirPort Setup Assistant, but although the light is still solid green, iTunes and AirPort Admin still can't see it.

Airport Express 802.11g cannot connect with OS X 10.8.3

Hi just updated my MacBook Pro to OS X to 10.8.3. I have an older model Airport Express (802.11g) that I have been able use to set up wireless speakers via Airport Utility 5.6 and 5.6.1. However, this most recent Mountain Lion update has rendered my Airport Express useless. I have to restart Airport Express each time I want to try to use it, to which Airport Utility will find the device and successfully add it to my existing wifi to allow me to play music wirelessly through my speakers. The second I close my MacBook, though, everything disconnects and Airport Utility is no longer able to find my device. The green light is steady on the Airport Express, so I know that is hooked up and working correctly. Is there a fix for this....? Thank you!

See if setting a static IP will correct the problem. Step 5 in the document below will walk you through the steps. Let me know what happens.
Printer Does Not Maintain Wireless Connection
I am a printer tech for HP.

Can my older Airport Express 802.11g join an existing wireless network

I have a Airport Express 802.11g firmware version 6.3 . Using the most recent Airport Express Utility I can set it up as a base station on its own independent network but I cannot join it to my existing home wireless network. As I go through the wizard (or manual setup) It just does not detect/display any existing wireless networks. I have plenty of mobile devices in the house that can see the wireless network...and next doors network.
So, it begs the question ... is an 802.11g unit actually capable of joining another network or is this capability available on later models only. A search of apple support and the wider internet for "Airport Express 802.11g capabilities" yeilds a blizzard or useless info.
Thank you

Sorry, I cannot help on Windows since I do not have a Windows 7 machine here to test. I have used XP in the past and AirPort Utility appears to be virtually the same in Windows as a Mac. I assume that this is the case for AirPort Utility 5.6.1, and it should be able to configure the Express.
The older Express will join most wireless networks if the following conditions are met:
1) The Express is functioning correctly.
2) The wireless network name is 12 characters or less and it contains only normal letters and numbers. Avoiding blank spaces in the wireless network name will help improve the chances of the Express joining the network as well.
3) The wireless router is broadcasting a compatible signal that would allow the "g" Express to connect. If your network is broadcasting a wireless "n only" signal, the Express cannot connect to this network.
4) The wireless security on the network is set to a WPA compatible setting. That is because the older Express has difficulty joining 3rd party wireless networks using WPA2 Personal or WPA2-PSK-AES encryption. In other words, if your network is now using WPA2 Personal or WPA2-PSK-AES settings, the "g" Express will probably not be able to join the network.
5) If you are using MAC Address Filtering on your network, the MAC address of the Express will need to be included in your settings.
6) The wireless network password uses the same guidelines that appear in 2) above
The items noted above will provide the Express with the best chance of joining your network. Plan to use the Manual Setup option in AirPort Utility and be prepared to use the Option or Alt keys on the PC if needed.
If you are looking for a guarantee of success in advance for this task, I cannot provide that and you should wait for another user to post who might be able to meet your requirements in that regard.

Airport Express 802.11g Setup with iOS Airport Utility

I'm traveling with just an Airport Express 802.11g model and my iPad mini. I want to change the settings on the Airport Express but the Airport Utility for iOS says this base station isn't supported. Do I have any options available to me to change the settings on the road without a computer?

Yeah, that's what I gathered. Question is, do I have any alternate means of configuring it? For example, a web interface.

Airport Express 802.11g Airplay Connection Issues

My dad has had an AirPort Express 802.11g hooked up to his stereo for a couple of years now. Uses it only to stream music. Our WiFi network is run by an older AirPort Extreme 802.11n (2nd Generation). Express firmware is at 6.3, as high as it can go for the g models.
2 months ago, I got my dad an iPhone 5 running iOS 6, and upgraded his MacBook to run OS X 10.7 Lion so he could sync and use iCloud and all that stuff. From that moment forward, connections to the AirPort Express are awful or nonexistent for most devices. Many times after you tell iTunes or the Music app to connect to it, when you hit play nothing will happen. Sometimes the progress bar will move, but no sound will play. Other times the sound will start, go for ~5 seconds, and then cut out. No issues with staying on the WiFi network.
Devices AirPlay DOES NOT work properly with:
- Dad's MacBook (final-gen plastic model) running OS X 10.7
- Dad's iPhone 5 (iOS 6)
- My iPhone 4S (iOS 6)
Devices AirPlay DOES work with:
- Dad's older iMac running OS X 10.6.8 Snow Leopard
- My MacBook Air running OS X 10.8.4 Mountain Lion
None of his music is on the iMac, and the concept of doing a VNC to make it work would be far out of his level of understanding.
Is this a case of me just needing to get him a new AirPort Express for full compatibility, or is there another workaround? Eventually I'm going to get him off of his MacBook and up to something more currently, like my Air in September when I upgrade.
This is practically the only thing my dad uses his computer for, so any help I can receive to get this working would be MUCH appreciated.

Hello niclake,
I found an article for you that would be a good place to start troubleshooting Airplay on the AppleTV.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
All the best,
Sterling

Airport Express 802.11g ethernet out

I'm getting the new Samsung 2550 bluray dvd player. If I connect it to an ethernet connection it will stream Netflix movies and Pandora radio thru my home theater. Can I get ethernet out of my Airport Express 802.11g that is streaming AirTunes music to my home theater and into the Samsung? The Samsung isn't wireless. If not, does the APE 802.11n support ethernet out?
Thanks

Thanks for the correction. I have an Airport Extreme 802.11g connected to a dsl modem. It is broadcasting to an Airport Express 802.11g at the living room home theater (AirTunes) and also to another Airport Express 802.11g in my son's room for the PS3 connection. Everything works great now. The <...> ethernet jack on the living room express is empty but I thought it was only for connecting to the dsl modem. It can be configured to provide ethernet out without screwing up my home network?

HT5022 How can I configure an AirPort Express 802.11g on Mac OSX 10.8.5?

I can't configure an Airport Express 802.11g using a MacBook Air with MacOS X 10.8.5 installed.
AirPort Utility 5.6.1 cannot be installed on a computer running OS 10.8.5...
Help!

As you know you cannot administer the older 802.11g AirPorts from Macs running the latest OS X versions or from an iOS device.
You still have a few options to do so:
Use a Mac running OS X Lion 10.7.2 or lower.
Use a Windows PC running Windows 7 or lower.

Speed issue with TC and Airport Express 802.11n in WDS mode...

Here is my problem.
I replaced my older base station / Express duo with
a new Time Capsule (1TB) and a new Airport Express (802.11n).
I set up the network with the TC as base station running a WDS network (WDS main) and the Express is the WDS remote.
When I check the wireless clients from the TC, I find my iMac running at 130Mbits and the Extreme at 54Mbits.
No other wireless clients are connected to the network (I kept my slower network as a parallel one for my "older" Macs).
The only other connected device is my Dish network DVR that is connected via an Ethernet cable directly to the Express.
So my question is why does the Express not communicate at >54 speed rate with the TC?
And, why does my iMac connect with 130 and not with 300Mbits?
Any thoughts?

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

AirPort Express 802.11g and WDS

Similar Messages

Maybe you are looking for