Airport Express, a poor choice for transmiting music from iTunes to my receiver

Looks like I just wated $99 for this  devise.   I got rid of my extra iPod which I used to play music on my stereo system.   However, the wirelss Airport express device has frequent interruptions.   Each time someone walks or moves anywhere in the house the transmission gets interrupted.  Sometimes it get interrupted or pauses for a couple of second even without any movement.   Looks like I'm going back to an iPod or CD's to play music reliably.

How do I know if there is wifi interference? 
iStumbler.
I have not connected this device via cable to my router.  I don't want to do it because the router is in one room and the device sits next to my TV and receiver in an adjacent room and I don't want wires dragging on the floor or walls.
You could always use Powerline adapters.
You don't have to turn this device to a router for it to play music from your computer to your stereo.
No, you don't, but it is usually a better router than ISP provided routers. If for whatever reason it doesn't work properly there's always the return grace period.

Similar Messages

  • AirPort Express has weak signal while playing music from Iphone, intermittent play

    AirPort Express has weak signal while playing music from Iphone, intermittent play

    I'm having the same problem, even more:
    - Watching movies over AppleTV: switches off every 20min (sleep mode).
    - Listening to iTunes music ofer AirPlay: the same.
    - A whole confusion with switching airplay destinations (AppleTV, AirportExpress) over iPhone remote app. Sometimes remote cannot find my library anymore
    - Before, I was able to multitask: stream a DVD to AppleTV, using airplay mirroring, and simultaneously stream music from iTunes on the same computer, over the iTunes airplay selector, to loudspeakers connected to AirportExpress. No longer possible.
    I've grown a big Apple fan in short time, proudly living  what for others is the future (your media stored anyhwere, controlled from anywhere, played anywhere, stop thinking in terms of devices). And, I've learnt to savour the  moments when you can look your Microsoft friends deep in the eyes and say: "The big difference with Apple  - it just works"...
    At the moment, I'm trying not to invite my friends.

  • Solution for buying music from itunes in France

    Hi,
    I live in Boston, but do have a second residence in France. I intend to spend a month there in the summer. I don't have a credit card in France. How can I purchase one of those precious gift certificates for French Itunes and use it when I am back in the US? Thanks for your help!

    How can I purchase one of those precious gift certificates for French Itunes and use it when I am back in the US?
    If you have a residence in France so that you have a billing address there, the next time you're in France, purchase a prepaid card (they're available through the Apple Store and perhaps through other retailers there), then open a new iTunes Store account in the French Store using that prepaid card. Or have a friend with a French iTunes Store account purchase a gift certificate for you, and then similarly use that code to open an account in the French iTunes Store.
    Regards.

  • Airport Express won't join network and disappears from view once configured

    Hi. I am having trouble getting my brand new Airport Express to connect to my network. I would appreciate any help you can provide. Here are the details:
    Computer: iMac, G5 running OS X Tiger.
    Network: Cable modem hooked to a netgear wireless b/g router. The router is configured to use WEP 128 bit encryption. I have connectivity on the router throughout the house on several computers and handheld devices (iPhone, etc).
    Airport Express Version: 5.3.1
    My goal is to add the AE to my current network in order to stream music from iTunes to my receiver.
    When I initially opened up the airtunes utility to set up the AE the setup program was able to find the AE and walk through the configuration process. I followed the steps, entered the correct network name, encryption algorithm, password, etc. When I completed setup and hit the update AE button the AE disappeared from the setup application and the device began to flash yellow. While troubleshooting I have reset the AE dozens of times over the past couple of days. I have done both the reset with power on (press reset for 10 seconds waiting for the quickflash) and the hard reset (plugging the AE in with the reset button depressed until the quickflash starts). In either case, the AE is rarely detected by the setup utility (about 1 in 10 times). When it is detected, I walk through the set up and get the same results. I have attempted configuration using both the manual configuration option and the automatic "wizard-like" method.
    I have tried to configure the AE wirelessly with it plugged in next to the computer and using a direct hookup via ethernet cable. Both methods produce the same results - flashing yellow light with AE undetectable by any Airport applications.
    I have also tried to load an older version of the firmware (5.3) on the AE. When I hit the update AE button after configuring the update to go from the current version to version 5.3 I get an error message stating that "an error occured while attempting to update."
    Thanks in advance for any help you can provide.

    Hi guys,
    I think I'm having the same problem as you all, and its driving me crazzzzy!. I added an AX to my existing network with a AEX all thru gigabyte switch, including the new AX. I set the brand new AX up with all the settings, hit update, all settings were configured and its working fine (i can see it in iTunes, stream music to it, all works fine) EXCEPT when i go to AU and try to go into the manual setting of the AX it just hangs, and after about 2 min, i get an error message:
    "An error occurred while reading the configuration. Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6722)"
    I have tried resetting it hard/soft/default but not sure if it really does reset it, still keeps same password, and network settings. Tried connecting it next to my existing AEX incase the AX is trying to communicate via WIFI instead of the hard wired ethernet. I'll try hard wiring it directly to my mac as some have had success.
    I have tried using OX 10.5.3, but still misbehaves as b4 with OSX.4.11. So its not my mac setup.
    I'll try to find the old firmwares as some have described, that might work....????
    This seems a common problem to many, I hope that Steve & the Apple engineers have got these messages and are fixing the problem as we speak.
    marc

  • Airport Express--locks up frequently for no apparent reason

    Have a question for you technical folks. We have two (2) airports, both bought in the last six months, both have the latest firmware installs. One, Airport 2 in our labeling scheme, runs a USB printer and it NEVER, EVER locks up. Fat and happy.
    The other one, Airport 1, runs a TOSLink to our Bose speaker system, we simply stream iTunes radio to it. At LEAST once a week, I'll get the flashing amber light and Airport Administrator shows that it's offline (or more specifically, doesn't exist!).
    Our network is flat out reliable; it doesn't happen when our ISP refreshes IP addresses, it's not a DNS issue, this one Airport just decides to go 'offline'.
    I unplug it, plug it back in and in 30 seconds the world is back to normal.
    Do others get the same mileage on Airport Expresses? Is it a streaming music issue? Is there a setting on my router that I should potentially look at?
    Thanks in advance.

    I'm posting this just in the hope that it might help someone else, suffering similar issues with their Airport Express. What I found out that helped markedly was to go in, hard reset the Airport, then manually configure it with a static IP address, outside of my normal DHCP enabled devices.
    We set aside .1 thru .49 on our DHCP and I setup the AE to grab .20, well outside of the normal 'auto DHCP' devices that grab .1 thru .12 or so. I honestly think the Airport, grabbing .1 or .2 was just getting stepped on by other devices on our wireless network.
    So far, so good. On the .20 address, we've had no further issues. I don't know if it was the 'hard reset' or the IP address, or, likely, a combination of the two, but we're back in business.

  • Airport Express to extend network and stream music at the same time?

    Hi. I have an Airport Extreme base station (primary wireless access point) and an Airport Express. Currently I connect my Hi-Fi to the Airport Express and stream music from iTunes, but I would like to also make use of its Ethernet port to connect other wired devices to my network. Is this possible; can it be used for both simultaneously? I've tried various configurations but not managed to achieve this.

    Welcome to the discussions!
    If you have an AirPort Extreme(n) and AirPort Express(n), the ethernet port for the Express will be active if you "Enable ethernet client" during setup using AirPort Utility.
    It sounds like you have either the "g" version of the Extreme or Express or both. Both devices must be "n" capable to use this option. If you don't see an option on the Wireless setup page of the Express to "Enable ethernet client", you have a "g" Express and this function is not available with your device.

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • How do i set up an airport express as an extender for my airport extreme

    how do i set up an airport express as an extender for my airport extreme

    Check these discussions:
    Best bets to extend/boost signals from Airport and AP Extreme
    How to extend and Extreme network using Express

  • Airport Express as wifi card for Xbox Live, then connect to Extreme network

    My son just got xbox Live and we're trying to use Airport Express as wifi card for xbox (connected to xbox via ethernet). We use Airport Extreme as router for the house.
    We're having trouble setting up Xbox Live, keep getting stuck at getting the xbox to communicate/access the web. Error reads "can't obtain IP address from router... make sure DHCP is enabled and has a large enough address range for all devices on network.. also make sure MAC filtering allows your console's MAC address or is disabled... "
    We dont' know what else to do. I'm at wit's end before giving Gates $100... Anyone know how to get connected?
    Thank you!

    You can also perform a simple test to verify if you have an internet connection at the ethernet port on the AirPort Express.
    Move a laptop near the Express, turn off the wireless on the laptop, and connect to the Express using an ethernet cable. See if you can open your browser and get a good solid internet connection.
    If you can, the Express is setup correctly and you know that you have an internet connection reaching all the way to the Xbox.
    If you can't then there is a configuration error somewhere and it will need to be identified and corrected.

  • HT4437 Streaming music from iTune to Airport Express

    In order to stream music from iTunes (Windows Desktop) to AirPort Express, do both have to be connected via WiFi network? What if both are connected via same wired network.
    My iTunes cannot see AirPort Express connected to the same network.
    thanks,

    Airport utility installed on my PC (Win Vista) cannot detect AA. It communicates only when I enter the IP address of AA. After that I have configured the AA in Bridge mode. AA has wired connection with Linksys Router.PC is connected with the same router.
    iPod Touch can easily detect AA and can stream music to it too.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hard to accept that (2) airport extremes, (3) airport expresses, cannot be configured to play pandora from iPad to one access point to play to all devices simultaneously.

    I have a verizon router hooked to my AP Extreme For my home wireless network. I have mutiple airport express along with an Apple TV wirelessly connected to the network also. With all the ways that these can be configured, how is there not a way to have all of the AP Express receive the same Pandora stream at the same time? Can they all be named the same thing so that my iPad thinks it's sending the signal to only one unit? Again, I find it insanely difficult to wrap my head around the fact that this is so difficult to make happen with the Apple technology available today. Any suggestions???

    Yes iTunes can according to this Apple information page: AirPort Express frequently asked questions (FAQ) - Apple Support
    Can iTunes send a single AirPlay stream to multiple AirPort Express stations?
    Yes. You can send an AirPlay stream to multiple remote AirPort Express units . The maximum number of remote AirPort Express units is up to six. The actual number that will work in your environment  will depend on conditions such as building composition and radio interference, distance to the remote AirPort Express units, and available network capacity relative to your other usage.
    I don't know enough about Pandora to help you in-depth with that - maybe someone else here can - but you should first test if it works with iTunes.
    That way you'll know if your network setup is working like you intend to. From there we can troubleshoot Pandora,

  • Should I set up separate apple ids for my kids or should we use mine?  If we separate them, can we still share our music from itunes?

    I have an iphone 5s and an ipad that both use my apple id.  Last week, my 2 kids got iphones so they are also using my id.  Should we create separate apple/icloud ids for them or should we all use mine?  Can we continue to share music from itunes if we have separate ones?  I'm really not sure of the best way to handle this and I don't want to screw anything up!  I really appreciate any help!  Thanks so much!

    There can be more than one Apple IDs for one iPhone, and each ID will be responsible for its own functions. You could, for example, set up one for iCloud, which will contain your contacts, calendars, settings, your backups, etc. But at the same time you could have another Apple ID for purchasing your apps, so when you buy or get free app, App Store will ask you for Apple ID and you can enter another ID that is not the same that keeps your backups and settings.
    If you want to separate your sons iPhone from your ID completely, you can change it in iCloud settings. Also it will make your children's life a lot easier.

  • I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    - iTunes purchases by maybe
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - For other music you need a third-party program like one of those discussed here:
    newer copy
    BTW, this is the iPod touch forum.

  • How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

    How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

    Hi littlemansa,
    If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    http://support.apple.com/en-us/HT4137
    Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results. 
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

Maybe you are looking for

  • Help hooking up my router

    I have a WRT54GS Wireless-G broadband router. I've had it for some time and it seems to work well. The problem is that a few days ago the desktop it was connected to stopped being able to get onto the internet. The router was still connected and the

  • Setup of FAQs and solution search in ICSS webshop

    Dear SAP SDN team We are currently using SAP CRM 7.0 EHp1. As per SAP standard best practise, we have configured the ICSS scenarios and setup the FAQs , solution search and live web collaboration. We are able to login the ICSS B2B and B2C webshops bu

  • Create object name using a String variable

    Hi, I�m making a jsp page and I need to add several objects to a vector. The vector's name is arrayGrupo, and the object is Grupo. The problem is that when I create the instance of the object, I cant �give him different names, so the add in the Vecto

  • Installing flash media live encoder on linux

    I've just downloaded FM live encoder on my CentOS 6.2 server, and there doesn't seem to be a way of installing it ! All i got was 3 files, i.e. "installSAA" "libconnect.so" "users" i have tried running ./installSAA but :-( it doesnt seem to install i

  • InDesign/PDF work flow

    I'm looking for help managing multiple pdf files created from InDesign. I make several catalogs from multiple InDesign files. Each InDesign file could be used in multiple catalogs. These catalogs are output as pdf files. The pdf files are sent to pri