Airport Express (and Airport Extreme) shuts down every now and then

So here's the deal,
I'm using an Airport Extreme as my base station (internet, printer, external hardrive). I'm also using an airport express (for airtunes) that is set up to join my existing network that I have created with my Airport Extreme.
Every now and then, the Airport express disconnects becomes non responding and starts to flash yellow. The strange thing is that even though my Airport Extreme is still showing a green light - this does not work either.
To resolve this I must unplug both Airports, restart Airport Extreme and then make my network. After that I can restart my Airport Express and join my existing network and everything works well for a day or 2 and then the same happens again.
What is going on? I mean even though I have found a solution it is timeconsuming and not very elegent. I would rather not have disconnections:-)
Look forward to hearing from you bright guys!
Message was edited by: Skibsted

Skibsted wrote:
I don't think I have a power issue since I have a lot of electronic connected to the same plug and they are working fine.
I have not tried to use the Airport Express alone but I have of course thought about doing that to narrow down the problem.
I don't have inteference.
How do I check if my neighbours are using the same channel?
There are a couple of programs out there. The one I have used is called iStumbler. http://www.macupdate.com/info.php/id/11753. This will show the networks around you and the channels they are using along with other things.
The distance from the AEX to my Airport Express is like 10 inches!
Having an access point close real close to a client will cause some interference itself. Also you had mentioned you had the AEX plugged into the same stip or outlet with other equipment. This can also cause interference and issues.
The firmware is the latest.
I can say that I think I have found a solution though. When I install my Airport Express I hit the "use to extend my network" instead of hitting "join existing wireless network".
It had been working flawlessly ever since (4 days)
I think extending a wireless network is only used if you have 2 AEBS or more. You would use WDS to extend the range when using an AEX but since you are not using it for that you set it right by joining a network.
Thanks

Similar Messages

  • Airport Extreme Shuts Down

    After using Airport Extreme with Roadrunner internet service for a half hour or so, it shuts down. If I click on the airport icon at the top of the screen, it gives a list of networks to join none of which is my network. Once in a while my network will be listed, I click on it, and airport is up and running again, for a while, after which the same thing happens again. Usually I'm unable to rejoin, after which I shut down my computer. When I go back on in a few hours, everything is normal again, for a while, after which the process starts all over again. Anybody else out there experiencing this kind of problem or has any suggestions, I would appreciate them. Thanks.

    a lot of people are having a similar problem. try this forum, no fixes but a lot of people that can share your pain.
    http://discussions.apple.com/thread.jspa?threadID=2508959&tstart=0

  • Airport extreme shutting down randomly

    My AE just randomly shuts down. Is there away to fix it? Will resetting it fix it?

    You can certainly try resetting it, but it sounds like you may have a defective unit.

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • My Airport Extreme Stops working every evening...

    Funny! My Airport Extreme stops working every evening at about the same time for 4-5 hours. I am assuming that there is some sort of "usage setting" that needs to be set. Unfortunately I cannot find that setting. Any help appreciated.

    A windows 7 laptop is also not seeing the airport extreme wifi signal. So I have a Mac Book Air, iPad & wired devices connected fine. I have an iPhone 3Gs, an iPhone 4 and a windows 7 PC all failing to connect. They all connect fine to other wifi devices. They all connected fine to the Airport extreme until the recent problems started. I don't think it's an iPhone issue, therefore - more likely to be an issue with the Airport extreme?

  • Recent freezing and shutting down every down 10-15 minutes and hard to log in to internet very slow

    My son has 2009 Macbook white version and recently (last week or so) freezing all the time, cannot log on to internet, and shuts down every 10-15 minutes. Is there a download (free hopefully to clean it up for any spyware or maleware). He is a student and very busy in University and cannot be without the computer?

    He will need something to back up onto like an external hard drive. The disks are necessary if the hard drive needs to be repaired, you can't repair the boot volume so you need to start up from an install disc and run Disk Utility from there. When you talk to him have him resettle SMC and pram, sometimes unexpected shutdowns can be corrected that way. The freezing is another issue, I'm concerned with the health of his hard drive. Another thing to ask when you talk to him is how much total space and how much free space does his hard drive have?
    To reset the SMC
    MacBook and MacBook Pro 
    Laptops with a battery you can remove 
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Newer Mac portables with a battery you don't remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • HT4145 I want to add airport express.  I now have time capsule and I am confuse.  Do I setup the express and then time capsule to the express?

    I want to add airport express.  I now have time capsule and I am confuse.  Do I setup the express and then time capsule to the express?

    Setup the Express to wirelessly extend the Time Capsule, or vice versa depending on which one is already set up. Or you could use bridge mode which involves using an Ethernet cable or Powerline plugs.

  • My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

    my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

    From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
    Try resetting it:
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

    i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

    Hi
    Trying to get a picture of it.
    • Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
    • Any other hard disks connected ?
    • If so - Formatted as ?
    Yours Bengt W

  • Safari crashes and shuts down every time I visit Grays Online. Anyone else with this problem?

    Safari crashes and shuts down every time I visit Grays Online. Site usually flicks off in under a minute. Anyone else with this problem?

    The website may need more memory than you have available if you are running iOS 5.1.1 on the original iPad. Try some basic troubleshooting steps. Maybe quitting all apps might be the best thing to try.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit ALL apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Hello, my itunes app is getting shut down every time I want to open it. Ever since I downloaded the last two updates. I tryed repearing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes

    Hello, my itunes app is getting shut down every time I want to open it.
    I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?

    Hi Vero Torres,
    If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • Just upgraded ipad 2 to ios7 and it keeps shutting down every 30 seconds

    I just upgraded my ipad 2 to ios7 and it now shuts down every 30 to 45 seconds.  It blacks the screen out and goes to the black screen with the white apple on it and then it will come back up to the sign on screen after a couple of minutes.  Once I sign on it repeats the same process over and over again.  Tried to run Apple diagnostics on it but it shut down again. 
    I now own a useless piece of equipment. 

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Device Not Recognised 
    For PC  >  http://support.apple.com/kb/TS1538
    For Mac  >  http://support.apple.com/kb/ts1591

  • My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

    My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

    Thanks so much Meg. Unfortunately, iTunes is the program I use to perform syncing. I don't really have other outside options. It is also the location of the backup I would use to restore my phone, and my only way to reclaim important data. I am concerned that, since the last backup occurred when the "other" bar was only moderately huge (around 29G I think), that a backup would replicate the problem back onto my phone. 
    My contacts, etc. are all in address book and the calendar app on my Mac.  As far as I know, iTunes is the way to get them back, but iTunes is where the problem is. 
    Any thoughts on this?

  • Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

    Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

    Hello,
    sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
    There may be several reasons that can cause Aperture to crash on start up:
    You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
    Your Aperture Library or Preferences may have been corrupted
    Or you are having a system wide problem with your machine.
    Or you may simple be running out of disk space.
    It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
    What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
    Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
    Regards
    Léonie
    Don't you think your user name is a little bit tactless in an Apple provided forum?

  • Shutting down every 30"

    I have been using my Mac Air with Spotify and connecting it to the stereo system. It started shutting down approximately every 30 minutes. When it does it even closes all the programs. I think that I have all the settings so that it shouldn't shut down with the power cord connected? I have the Energy Saver setting on NEVER. Is there somthing I'm missing?

    I've had FIOS for about two years and this just started happeneing to my HD set top box. I've gotten three different answers for when to expect delivery of the new box. POOOOOORRRR customer service! I don't expect this to resolve the issue. If it doesn't, I will demand that the outside box be replaced next. I also have three standard set top boxes in the house that are not affected. Verizon seems to be skirting the issue rather than actually trying to solve it. My box shuts down every 5-10 minutes now. And often gets stuck in a restart cycle and won't come back up.

Maybe you are looking for

  • MICR printing problem using the Crystal ReportDocument object in C# app

    We developed a small C# windows program 6 months ago that reads a bank draft record and uses a Crystal Report form to print the draft (using ReportDocument() object and the PrintToPrinter() method).  This has been working fine for 6 months. (using .N

  • 7.0.2 update - won't let me use my 3g in apple related apps

    since i updated to IOS 7.0.2 - I can't use it to login in any apple related apps or download in appstore... what should i do? Settings are correct - all are on Itunes and appstore 3G on  and data... tried resetting and tried Restore. still now good.

  • CSOM: Update the IsLockedByManager task field

    Hi, I have a request from a Customer: he need to automatically Lock Tasks for Updates, depending on some conditions (mainly based on the "age" of te task. The Customer is hosted in Project Online. My idea was to create a task boolean field, with a fo

  • Elements 10 in Win 7 hangs in memory

    The product came installed on a new HP desktop.  Elements 10 wanted to do an update and I said yes.  It told me I had to close the program.  It was NOT running.  Cancelled the update and tried to run elements 10.  Nothing...no errors just nothing.  T

  • Adobe Audition 3.0 Setup - Serial Number Issues

    I'm trying to resolve an issue with the Adobe Audition 3.0 Setup. I tried the Chat Support a few times, and they requested me to submit the problem to the forum for Professional Assistance. The issue is that the Setup window asks me for the serial nu