Airport Express and Iphone Remote Application

I have G5 Power PC using 10.5 software. I have Airport Express that allows me to play my ITunes library remotely through my home sound system. I had downloaded and used the Remote application for the IPhone and it had worked well until I recently added Time Machine for backup and to set up a Home WIFI network using my cable modem connection.
Now I am no longer able to use the Remote App on my Iphone.
I choose the Airport Extreme network and when Remote attempts to connect to my Music Library, a receive the following:
Remote could not connect to your library. If you have a firewall enabled in your router or computer, make sure the firewall is not blocking communication with Remote.
I am not sure where I would go to be able to see if communication is blocked.

Thanks for your reply.
Well. I am not using the Airport Express as a modem, but as a node for streaming music (and with lan to wan etherbridge function (proxy STA)). Very easy to notify when it does not communicate, -no music.
I have a zyxzel modem at root to my Internet provider.
I like to know the background info for this settings.
I read about the multicast problem, and therefore enabled the filtering.
I will try these settings you suggested, but is there a reason for those settings, the Th. at 2304 and the B.I. at 75?
It could take some time to see, if these settings ajustments have any effect for my problem, but I will notify any changes.
JE

Similar Messages

Airport Express and iPhones can't see network-macs and ipad can?

I have an Airport Extreme base station connected to a comcast modem, with 2 express units for airtunes.
After some fiddling around due to the comcast outage, now I can't see either of the Airport Express units in the Airport Utility, AND neither my or my wife's iPhone can see the network. The iPad, iMac, Macbook and a PC can all connect no problem. My phone connects to wifi at work no problem.
Any thoughts are greatly appreciated!

Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Your settings should look like this:
Wireless Mode = Create a wireless network
wireless Network Name = Name of your wireless network
Check mark not needed next to Allow this Network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 Personal
Wireless Password = Backspace and retype your password here
Confirm Password = Backspace and retype your password
Click the Internet icon
Connect Using = Ethernet
If you have a simple modem (only one ethernet port), the setting for Connection Sharing should be set to Share a public IP address
If you have a gateway (combination modem and router with 3-4 ethernet ports), the setting for Connection Sharing should be set to Off (Bridge Mode).
Update to save changes
Restart all other devices
Any luck?

Airport Express and iphone

I got Airport Express for Xmas and hooked up. The Admin Utility and set is on my iMac. My son has a laptop and I have an iPhone. I noticed when the imac is off, I can't get wi-fi on my iphone. I have really bad reception in the house and thought airport would solve it.
Does my imac have to be on 24/7 for iphone to get wi-fi? It never occurred to me I had to leave computer on. O

I checked my settings and under Sharing>Internet, sharing is off. Should it be on?
Only if you want to enable Internet Sharing on your iMac. Again, this feature reconfigures the iMac to perform as a software router. This would normally be used if you didn't already employ a hardware router on your network.
I assumed that in your current network configuration, the AXn was directly connected to your Internet modem by Ethernet ... is this not the case?

Can someone explain AirPort Express and iPhone interaction?

Is it possible to use the iPhone along with an Airport Express? Is there any interaction between these devices? For example can I use the iPhone to control music playback through the Airport Express?
thanks.

Nathan,
Thank you for your reply but can you please provide more details? I'm really confused over Airport Extreme vs. Airport Express vs. Air Tunes and how this all interfaces with the iPhone. Can you please explain these devices? I also saw a post from someone stating they could control wireless music playback via their iPhone, how is this possible?
Edit: See the post by Mike Kelley at http://discussions.apple.com/thread.jspa?threadID=1159025
How is he doing this? Is he using Airport Extreme or Airport Express or Air Tunes?
Message was edited by: EricC617

ITune-Airport Express and Apple remote

My sound system (Quad) is hookup to my Airport Express. How can I set the apple remote to low or rise the sound from iTune, instead of using the mouse or the trackpad?
Thanks

CentFois, Welcome to the discussion area!
The Apple Remote has absolutely no control over the AirPort Express (AX).
If you are asking if the Apple Remote can control the volume in iTunes on your Mac, you should ask in the iTunes question.

Airport express causes iphone and ipad to lose wifi

We have a new (3 months old) Airport Extreme in our house. It provides internet connectivity for an iMac, macbook pro, iphone 3gs, and ipad 2 (and a pc). Never had any problems.
Two days ago, I purchased an Airport Express to put downstairs, and wirelessly extend the wifi network. Setup seemed to go smoothly, and all devices reported a stronger signal downstairs. However, the iphone and ipad started behaving really strangely after an hour or so. They kepy saying they couldn't connect to the network, and even when I selected the network, they kepy saying the password was incorrect (even though I typed it in 10 times). I reset the network settings on the iphone, as well as powered it off and rebooted it to no avail. The only way I have been able to get things working again is to unplug the airport express; restore the airport extreme to its factory settings, and then re-set-up the network on the airport extreme from scratch.
After things were working again, I re-installed the Airport Express and configured it to wirelessly extend the network. Same thing happened: everything was fine for an hour or so, and then the iphone and ipad lost wifi connectivity and wouldn't re-connect. Only way to fix it was again to unplug the airport express and wipe the airport extreme back to factory settings and rebuild the network from scratch.
Is anyone else having this issue? I'd really love to use the Airport Express for its advertised functions of extending my wifi network (and streaming itunes on my stereo downstairs)-- but if it garbles or kills the ability for my iphone and ipad to use Wifi, that's unacceptable and it will be going back to the Apple store.
I should mention that as far as I am aware, I have the latest versions of ios running on the iphone and ipad, and the latest firmware updates for the airport extreme and airport express.
Has anyone dealt with this problem?
Many thanks.

Problem solved, found Ninja10's post and was able to fix this problem. Thanks Ninja10!
Ninja10
Re: iPhone 4 unable to connect to Airport Extreme
Aug 27, 2012 3:25 AM (in response to Ninja10)
Problem solved. I was recommended by a non Apple consultant to manually change the radio channel. Channel 11 worked.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

I was told at the Apple store that I could simply plug in ( electric power) the Airport Express and it would find my wireless network. I hoped to use it as a way to play music from my iphone. I do not use other Apple routers etc,

The Airport Express is not finding my wireless network. I do not have any of the devices listed below. I have a Belkin wireless router. Can I still use Airport Express ( without plugging an ethernet cable into it) ? Any ideas for how to make it find my network ? It is sitting next to the wireless router-so is in range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
Using iPhone
The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
Resetting the iPhone took care of an issue like this with my wife's iPhone.
http://support.apple.com/kb/TS1398

Hi. Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV? Whenever I click either/or it just changes the speakers rather play through both? Cheers

Hi.
Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?
Whenever I click either/or it just changes the speakers rather play through both?
Cheers

to transfer audio to an airport express the device needs to support airplay unless your samsung tv's manual clearly state it does support it then it don't
appletv can't get audio input into it the optical connector is output only same with the hdmi port

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem. I believe that it is in AirPort Express, and wou

AirPort Express wireless connection, when I surf the news sites so I linked to **** pages. And must close the window. If I use my iPhone with Internet sharing the same computer, then I have no problem.
I believe that it is in AirPort Express, and would have to clean it. How do you do that?

You need to use the Express in router mode.. I think you are trying to use it in bridge mode.. but you need to give us a lot more details.. screenshots might help more than anything.

Airport Express and Surround Sound Issue

I recently have lost the ability to play music via Airport Express through my surround sound. It was working one day, I synced my IPhone and the option to play music through my surround sound is gone. Same with the "Remote" application for IPhone.
Note: I am able to chose "Computer" and / or "Apple Tv" but not my surround sound. Any ideas how to correct this and why this was changed?

Hello irk26. Welcome to the Apple Discussions!
Although the Linksys WRT54GL, which is Linux-based and running DD-WRT firmware, is WDS-capable, it can be tricky at times for it to be also WDS-compatible with the AirPort base stations ... as you are probably already aware.
Maybe one of the following articles may be of help:
o How to extend your Linksys WRT54G with AE
o Linksys WRT54G and WDS
o Linksys WRT54G, Airport Express, and WDS
o AirTunes, AirPort Express, and the WRT54G
o Using Airport Express as a range extender/repeater for Linksys Cable/DSL router WRT54G
o Extend a Linksys WRT54G network via AirPort Express

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How do I install a new airport express and link a second airport express to extend the network of the first airport express?

I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Airport Express and Iphone Remote Application

Similar Messages

Maybe you are looking for