Airport Express and TWC Modem - extremely slow

I hope someone can help! I have a cable modem from Time Warner. When I'm directly connected, it flies, but once I connect to through the Airport Express, it slows down to a crawl.
I have the new Express and have done the hard reset several times. I believe it's something to do with the settings but can't seem to get them to work together.
Any ideas?

I seem to have the same problem. Everything was fine up until the 10.5.4 update--I wonder if that has anything to do with it?
Anyway, my browsing began to slow when connected to AE. I've tried various browsers and they all began to function the same way--slow.
So I connected my cable modem directly to my iMac and behold, I was browsing the net at lightning speeds again.
I've had my AE for a few months, I'm wondering if it's the AE or Leopard. Also, I'm wondering if I can return it to the Apple store and get a new one?

Similar Messages

Airport Express and USB Hard drive and extremely slow performance

HI Guys,
I seem to having a lot of trouble with an Airport express and a Lacie 1TB drive. While I have solved several problems by updating firmware and enabling journalling on the Lacie, I am still having problems with extremely slow performance with my macbook, particularly using itunes and Firefox.
Any ideas and any further information needed?
Regards
BJDprivate

BjdPrivate wrote:
HI,
I formatted it using the Lacie setup program for Mac and later enabled it for journalling using Disk utility. This seemed to solve a lot of the recognition problems I was having, however the I-Tunes and firefox performance is still atrocious. If I do Need to completely reformat it using Disk Utility, will I lose my files on the disk now?
not if you move them to a temporary location before you start.
yes, you are better of formatting the drive with DU.

Extending network with Airport Express and Airport Extreme (latest models) causes chaos on network

Today I upgraded from my several year old Airport Extreme (3rd gen) and 2nd gen Airport Express to a new (what you'd buy on the shelf today) Airport Extreme and Airport Express. All airports are updated with the latest firmware and I'm using windows 7 for configuration.
The intention is to use the Airport Extreme as the main router, also serving wifi. And extend the network using the express. As such, the following has been done:
The Airport Extreme is configured for automatic channel, and automatic radio mode. I tried to select 802.11n 5 ghz and 802.11 n 2.4 ghz only, but it won't take the changes. Additionally, it wont' accept me using only channel 6. Not sure why, but I digress. The airport extreme is not set to broadcast a separate name for the 5ghz network.
The Airport Express is configured to use bridge mode, use an existing wireless network and is connected to my network on it's WAN port (the circle icon on the back) with ethernet. The password and wireless name used in configuration is the same as created initially on the Airport Extreme.
Initially I did the configuration of both airports on my computer, connected by ethernet to ensure stable connectivity while I inputted settings. During this, they appeared to accept the changes fine. However, when I moved the airport express to it's destination (other side of my house), the entire network went crazy.
Internet became slow, and often wouldn't load pages. This was on wired and wireless connections. When I attempted to administer the Airport in the Utility, they would not load, an error would occur. Also, at one point the Airport Extreme had renamed it self with a (2) at the end. Which was super odd. So far, the only solution has been to unplug the Airport Express and attempt to devise a solution.
Anyone have any ideas? Of course, I will continue to tinker with this, but it seems realllly strange. The previous setup was also extended (granted, using wireless only, not ethernet > wireless) and worked fine, granted it was a smidge slow, but it worked.

I wanted to add this.. I followed the guide here: http://support.apple.com/kb/HT4260 to extend using ethernet, and the above is the result.
I just tried re configuring in OS X Mavericks and got the same, odd, result.

Questions about AirPort Express and Extreme!

I have BT Infinty and the hub is situated in the living room. What I want to do is extend the wi fi to my room which is around 10 metres away.
Are you able to connect the AirPort Express to the network and then create a network for the AirPort Express for my MacBook Pro to connect to?
I have two options and questions
1. Buy a AirPort Extreme and replace my BT hub with that. Then use an AirPort Express to extend the wi fi. But when you extend the wi fi does it mean that when I search for a wireless hotspot from my Mac I connect the the AirPort Express? Or is there a way of making the AirPort express to have a different name?
2. Use my Bt hub and buy a AirPort Express and connect it to my Infinty Connection. BUT is there a way of making a hotspot for the AirPort Express for example
my Infinity connection is named Bt-Infinty2356
I use the AirPort express to connect it and extend the wifi
THEN is it possible to make a hotspot named "AirPort-Express-Muppet" for me to connect from my Mac?
Thanks

I have no experience with the "BT Infinity Modem" and "BT HomeHub", but I assume that they are two separate units?
If yes: connect the modem direct to the Extreme by ethernet cable.
If it is a "combined" unit: connect the Extreme by ethernet cable to one of the ethernet slots on the hub.
In both cases set the Extreme to "Create a wireless network".
Use a Airport Express to "extend a Wireless Network", and extend the Extreme.
Do not expect the Airport Express to extend the BT hub wireless network, because it will not work.
In both cases you have two wireless networks: one from the Hub and one from the Extreme.
Off the record: I have the same situation in France with the "Livebox" (Orange) that is connected to a Netgear WiFi router: two network: the Livebox is just that, the Netgear is "relayed" through Netgear Routers (Switches) to five areas in the "house". The same in Switzerland, but there I used Extreme and Express units instead of the netgear units.
The Hiome Hub should work fine connected to the modem by cable, and the other network also by connected to the cable. Do not mix the different brands: trouble.

Any software differences between new airport express and extreme?

I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
The only difference I can see is using the USB for hard drive use.
Also, do you think the performance will be similar. I know the time capsule actually rated slower than the extreme even though they use similar hardware.

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

3 powerline adaptors with airport express and extreme

Hi all,
I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
1st Airport Express plugged into the 2nd powerline adaptor
3rd Airport Express plugged into the 3rd powerline adaptor
so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
Connection Sharing: Off (Bridge Mode)
Click Update to apply the new settings
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing AEBSn's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Weird semi-loss of AirPort Express and Extreme

I have an odd symptom where, when I launch iTunes, my AirPort Express is sometimes listed is not available from my Power Mac G% (running 10.4.8).
When I launch AirPort Admin Utility, NONE OF MY AIRPORTS (either Extreme or Express) are listed. Rescanning or selecting Other does not solve this.
What is odd is (1) The AirPort menu still shows me connected to my AirPort network and indeed I still have Web access etc. and (2) If I launch AirPort Admin Utility from my MacBook Pro, it shows all the AirPorts correctly (so the problem seems limited to my G5 rather than the AirPort devices).
If I restart my Power Mac G5, the problem goes away and all works well again- for a day or so - and then it returns.
What can I do to permanently eliminate this annoying symptom?

1.) Since the Airport Express is extending the Extreme Network, will my whole network now be single radio only network, since the Express only has one radio?
Although, your AirPort Express is 802.11n, it is not simultaneous dual-band. That means it can either extend the AirPort Extreme Base Station (AEBSn) 2.4 GHz or 5 GHz radio but not both at the same time. So the AEBSn will still be broadcasting on both the 5 GHz (for 802.11a/n) and on 2.4 GHz (for 802.11b/g/n).
2.) What if both an 802.11g and 802.11n device connect to the Express' radio instead of the Extreme's for some reason, will this make both devices operate at 2.4GHz?
Yes.
3.) What if an 802.11g device connects to the Airport Express' radio. Since this is now 2.4GHz, will it only now communicate with the Airport Extreme at 2.4GHz?
Assuming that you configured the AXn to extend the AEBSn's 2.4 GHz radio, it will only be able to communicate back to the AEBSn on its 2.4 GHz radio.

Can u run Airport Express and a wireless modem together?

Can u run Airport Express and a wireless modem together at the same time?
I'm using AE purely for music distribution and have just bought a wireless modem for the internet (not a AE). However I can now only select either the AE network, OR the wireless internet network (it's BT HomeHub). Hence I can either play music or use the internet, but not together!
Any ideas anyone..??
Thanx
David

You should configure your AirPort Express (AX) to join the wireless network provided by the modem. The instructions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

My airports express and airport extreme have started saying they can't be read by airport utility. How do I fix this?

I have recently been re-jigging my network and in the process have restored my 2 airport expresses and one airport extreme to their default settings. Everything was working 100% fine until suddenly my netywork won't work and when I click on any of my airports to see what's happening airport utility says they can't be read. Can anyone help me solve this?

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Airport Express (and Airport Extreme) shuts down every now and then

So here's the deal,
I'm using an Airport Extreme as my base station (internet, printer, external hardrive). I'm also using an airport express (for airtunes) that is set up to join my existing network that I have created with my Airport Extreme.
Every now and then, the Airport express disconnects becomes non responding and starts to flash yellow. The strange thing is that even though my Airport Extreme is still showing a green light - this does not work either.
To resolve this I must unplug both Airports, restart Airport Extreme and then make my network. After that I can restart my Airport Express and join my existing network and everything works well for a day or 2 and then the same happens again.
What is going on? I mean even though I have found a solution it is timeconsuming and not very elegent. I would rather not have disconnections:-)
Look forward to hearing from you bright guys!
Message was edited by: Skibsted

Skibsted wrote:
I don't think I have a power issue since I have a lot of electronic connected to the same plug and they are working fine.
I have not tried to use the Airport Express alone but I have of course thought about doing that to narrow down the problem.
I don't have inteference.
How do I check if my neighbours are using the same channel?
There are a couple of programs out there. The one I have used is called iStumbler. http://www.macupdate.com/info.php/id/11753. This will show the networks around you and the channels they are using along with other things.
The distance from the AEX to my Airport Express is like 10 inches!
Having an access point close real close to a client will cause some interference itself. Also you had mentioned you had the AEX plugged into the same stip or outlet with other equipment. This can also cause interference and issues.
The firmware is the latest.
I can say that I think I have found a solution though. When I install my Airport Express I hit the "use to extend my network" instead of hitting "join existing wireless network".
It had been working flawlessly ever since (4 days)
I think extending a wireless network is only used if you have 2 AEBS or more. You would use WDS to extend the range when using an AEX but since you are not using it for that you set it right by joining a network.
Thanks

I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light

Trying to extend by 802.11n airport extreme using a 802.11n airport express and the express is flashing amber, trying to extend by 802.11n airport extreme using a 802.11n airport express and the express is flashing amber

trying to extend my wireles network using a 802.11n airport extreme and pluging in a 802.11n airport express and the express is flashing amber not solid green
what am i doing wrong
btw I have airport utility 5.5.3

trying to extend my wireles network using a 802.11n airport extreme and pluging in a 802.11n airport express
Can you clarify what you mean by "plugging in"? Are you saying that you are pluggin in an Ethernet cable to the AirPort Express from the AirPort Extreme?
Or, does "plugging in" mean wireless?

Airport Express and TWC Modem - extremely slow

Similar Messages

Maybe you are looking for