AirPort Express and Xbox 360

I am currently using my laptop to bridge my wireless to my xbox without buying the xbox wireless adapter. I want to get the AirPort Express to do this job rather than my computer doing it. I currently have the following setup. I have my cable modem from my isp which has ethernet running to my AirPort Extreme. The AirPort Extreme has one wired computer and one wireless which is my laptop. My xbox connects to the AirPort Extreme through my wireless Laptop

Here's how to do it:
_On the AirPort Extreme:_
Open AirPort Utility, click Manual Setup
Click the Wireless tab just below the row of icons
Wireless Mode should be "Create a wireless network" (It's probably already set this way)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save settings
_On the AirPort Express:_
Open AirPort Utility, Click Manual Setup
Click the Wireless tab
Wireless Mode should be set to "Extend a wireless network". If you don't see this choice, hold down the "option" key when you click on the selection box
When you select "Extend.." your wireless network created by the TC will appear as a choice to extend. Select it and enter the wireless password.
Make sure there is a check mark next to "Allow wireless clients"
Update to save settings.
Whenever you plug the Express in, it will automatically "extend" the main wireless network from the Base Station. The ethernet port is "live" in this setup so you could connect an ethernet device if you wish.
But note...you cannot extend the "guest" network if you have a dual band AirPort Extreme. Only the "main" network can be extended. For more info, refer to the Designing AirPort Networks guide, pages 43-44.
http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

Similar Messages

  • AirPort Extreme, AirPort Express, and Xbox 360

    Perhaps someone's already posted a question about this, but I couldn't find a specific post that addressed my questions. I recently bought an Xbox for my stepson and hope to use an AirPort Express to connect it to my home network, which is built around an AirPort Extreme Base Station. Anyone out there done this? Can anyone share how they set theirs up?
    Thanks in advance!

    Hi.
    I set up the same configuration proposed by Henry.
    My Airport Extreme is cabled to the Netgear ADSL Router. Airport Express is configured in WDS mode together with Airport Extreme and both are in bridge mode (DHCP disabled). Then, the Xbox 360 is connected with ethernet cable to the Airport Express. Finally, I set up the Airport express and extreme IP address as static. In this way, I have only one wireless network and the IP address is given by the Netgear Router for all hosts (Xbox 360 too), other than Airport base stations, which are always reachable with their static IP address.
    I hope this description will be helpful.
    Bye,
    Francesco

  • Airport Express to Xbox 360

    I'm currently on a military base and I connect to a wifi that requires you to log on using a browser. I want to connect my xbox to this wifi, but being I don't have a browser on it, I can't connect. If I purchase an airport express, could I connect it to the xbox? Also, do I have to connect the airport express directly to a router? Hopefully that isnt that case, because I have no access to the router. Would it be possible to bridge connections between my macbook pro and the airport express and use that to connect to my xbox?

    Hey Will,
    I just got my wrt54g to work with my standard Xbox. Do a search on google for "Airport Express and Linksys WRT45G" - there are 2 or 3 really good articles with step by step instructions on how to do this. You usually have to load a 3rd party firmware onto the router which can be intimidating, but you need it to control the WDS settings. Once I had that all set up, I had to manually enter my IP/Gateway info to my xbox and I was good to go!
    Good luck.
    Dave

  • Time Capsule, Airport Express and Xbox Live

    Recently I went out and bought a Time Capsule 1TB hoping to extend my wireless network. I knew that Apple products wouldn't usually help extend a DLINK network so it came as no surprise when I could not extend my DLINK network. My solution was to buy a new Airport Express, disable the wifi on the DLINK router and extend the Airport Expresses network via the Time Capsule.
    The current situation is: DLINK <-> Ethernet <-> Airport Express Wireless Time Capsule <-> Ethernet <-> Xbox360
    The issue is the Time Capsule as far as I can see. For apparently no reason it will change from a solid green status light to a flashing amber status light. Signing my Xbox into Xbox Live seems to be a trigger, but the Time Capsule goes amber even when the Xbox isnt on at all. When it does change to flashing amber I am no longer able to detect it within Airport Utility and as such am unable to diagnose the issue. Any help would be appreciated.

    Here it works fine. I have a Time Capsule connected to my ADSL modem. I had to buy an all new Airport Express 802.11n, though, because my old AE could not extend my network.
    On an all 802.11n setup you just check the "Allow this network to be extended" on the master (Time Capsule), and choose "Extend a wireless network" on the remotes.
    The X-Box is connected with an Ethernet cable to the Airport Express, and connection to X-Box Live works fine.
    Good luck!

  • Air port express and Xbox 360

    I use the Airport Express as my wireless router. When I first bought it I just used it for Air Tunes to my outside speakers, no problem. Then I was able to get cable internet and used it to connect to my iMac, no problem. Then my wife bought a laptop, connected to the ApE, no problem. Bought a Vizio Bluray, connected to the ApE, no problem. THEN I got an Xbox 360, the newest one out with the built in wifi, big problem. Nothing I can do will connect it to the ApE. I have tried manually setting the IP, subnetmask, SSID with password and nothing. Any thoughts on this??? Yes, I'm trying to play email wars with Microsoft support, but no help yet.

    One option would be to enable Internet Sharing on the iMac to share the Internet connection to the XBox's Ethernet port.
    To setup for Internet Sharing (Wireless to Wired):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    o Click Stop to start the software firewall
    Setup the Network
    Cable Modem > (Ethernet cable) > /[Ethernet port] Wireless Internet Router > (wireless) > /[AirPort Card] iMac /[Ethernet port] > (Ethernet cable) > /[Ethernet port] XBox 360
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    o Verify that "AirPort" and "Built-In Ethernet" are enabled.
    o Verify that "AirPort" is at the top of the list, followed by "Built-In Ethernet."
    o Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > AirPort > TCP/IP
    o Configure IPv4: Using DHCP
    o Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    o Share your connection from: AirPort
    o To computers using: Built-In Ethernet (checked) (Note: Uncheck all other entries in the list.)
    o Click Start

  • Airport Express and Xbox Live

    I am thinking of purchasing either an Airport Express or Airport Extreme Base Station. I have an Xbox 360 with the USB wireless adapter. Can someone with experience tell me if the Xbox Wireless Adapter will work with either router? I have researched that it will only work if security is disabled. Has this been fixed? Please help.
    I would also like to know. On the Express, would my Comcast modem have to remain plugged into the single ethernet port or not?
    Thanks...

    In the past I had difficulties connecting xbox 360 to extreme N so my solution was to connect an express by ethernet to the extreme N and set the express to create its own wireless network. That worked fine. Security was set to WPA2.
    A month ago since I updated the firmware on the extreme to 731 and airport utility to 531 I can connect xbox360 wireless to the extreme so I discarded the express.
    get the extreme N its more flexible than the express. Comcast modem to wan of extreme and you still have three lan ports to connect other devices plus a usb port.

  • AirPort Express and xbox

    Hi all
    I recently got an Airport Express for Christmas and want to connect it to both my home sterio and xbox. I have an existing wireless network at my home using a 3rd party wireless router.
    I know that I can wirelessly send music to my home sterio (via the speaker jack), but I can't seem to get the xbox to discover the network (via the ethernet cable). Can I even do this?
    Please let me know, thanks.

    i've tried both automatic, and i've tried manual setting by inputing the IP from both the airport information and the network settings, all with the same results. I know for a fact my internet provider doesn't use PPPoE so that's not the problem. Is there somewhere in the xbox360 settings where I can determine if it's set to DHCP?

  • AirPort Extreme and xbox 360

    How do I open NAT on 2013 AirPort Extreme 7.1 for xbox 360 connection?

    Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
    Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
    Option 1 - Create a DMZ
    AirPort Utility > Select the AirPort > Edit > Network Options
    Enable default host at: <Enter the IP Address for the XBox>
    Option 2 - Configure Port Mapping
    The following ports must be available for Xbox Live to operate correctly:
    UDP 53
    UDP 88
    UDP 1863
    UDP 3074
    TCP 53
    TCP 80
    TCP 1863
    TCP 3074
    To setup port mapping on an AirPort base station, either connect to the AirPort's wireless network or temporarily connect directly, using an Ethernet cable, to one of the base station's LAN ports, and then use the AirPort Utility, to make these settings:
    1. Reserve a DHCP-provided IP address for the Xbox 360.
    AirPort Utility > Select the AirPort > Edit > Network tab
    Click the "+" (Add) button to enter a DHCP Reservation.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
    IPv4 Address: <enter the desired Private IP address you want to assign to the Xbox>
    Click Save.
    2. Setup Port Mapping on the AEBSn.
    While still on the Network tab:
    Click the "+" (Add) button under the Port Settings dialog box.
    Description: <you must enter a description here; it can be anything you want>
    Public UDP Port(s): 53, 88, 1863, 3074
    Public TCP Port(s): 53, 80, 1863, 3074
    Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
    Private UDP Port(s): 53, 88, 1863, 3074
    Private TCP Port(s): 53, 80, 1863, 3074
    Click Save
    Click Update and allow the AirPort to restart.

  • Airport Express with BT Home Hub and Xbox 360

    Hi,
    I know this is kind of an out there question, but im looking into buying an airport express and i was wondering if there was a way that the Airport express could connect to my existing wireless network (BT Home Hub) and share that internet connection over ethernet to my xbox 360.
    My xbox is in another room and i cannot connect it to the router. I have been reading about WDS and client mode but it all goes over my head. can anyone explain if this is possible with the airport express even though i dont have an apple base station?
    Im also wondering if Airtunes would work for my speaker system. Any help is appreciated!

    Welcome to the discussions!
    "i was wondering if there was a way that the Airport express could connect to my existing wireless network (BT Home Hub) and share that internet connection over ethernet to my xbox 360."
    Possibly. You would need to check to see if the BT Home Hub was compatible with what is called ProxySTA. Otherwise, the ethernet port on the Express will not function.
    WDS would not be compatible with your BT. Even if it were, the wireless network bandwidth would be reduced by 50%. Not what you want for gaming.
    Assuming your BT is a router with ethernet ports, you absolute best connection for any application, but especially gaming is an ethernet cable.
    If this is not feasible, look at ethernet power line adapters. One adapter plugs into the AC socket at the router end and the other plugs into an AC socket near the 360. The adapters use the AC wiring in your home to transport the ethernet signal. This is almost as good as a straight ethernet cable and far better than wireless for gaming.
    The Express would be able to join the wireless network of the BT router for use with AirTunes.

  • I am trying to link our xbox and PC into our wireless network.  I am using an apple airport express and it is asking me for a WEP Key.  Where can I find my wep key?

    I am tyrying to link our xbox and PC int oour wireless network.  I am using an apple airport express and it is asking for my WEP Key.  Where do I find it?

    You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
    Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
    **Edit
    Airport does support the WEP protocol.
    Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

  • Airport Express and Linksys bridge, HELP!!!

    Hello,
    I was just wondering if it was possible to use a Linksys router as a primary wireless access point and using the Airport express to bridge/ extend the wireless network?
    If so, what are the steps that i must take to make it happen?
    Would i be able to thus use the airport express' ethernet connection cable to connect to my xbox 360, in effect, turning the Airport express into an expensive wireless ethernet adapter?
    Thanks in advance...
    Ian

    Thanks a lot...
    Just one last question though, would i be able to use the ethernet cable from the airport express and connect it to let's say, an xbox 360, will the airport express work as a wireless ethernet adapter now?

  • Airport Express and D-link router

    I have a new Airport Express and a D-link DI-524 wireless router which I wish to use to both extend my wireless network and connect my Xbox 360 wirelessly as it is not near my base station and I don't want to wire through my house.
    Could anyone please give tips on how I should do this? Should I use the Airport as the base station or the router? How can I get my Xbox to see the internet?
    Your help will be muchly appreciated!

    danbowles, Welcome to the discussion area!
    Sorry but that is not possible. The Ethernet port on the AirPort Express (AX) is ONLY activated if it is connected wirelessly using WDS. The D-Link router does not support Apple's WDS.

  • Updated to 7.3.1, PC and Xbox 360 can't connect

    Hey, anyone else having problems getting PCs and Xbox 360s to connect to the AirPort Extreme after the 7.3.1 update? Wired or wireless, my PC (Vista, with and without SP1) and my Xbox 360 (with the official wireless network adapter) won't connect.

    I am in the same boat...
    7.2 worked great... 7.3.1 does not even show in the network list. Also, downgrading it does not fix the issue?!?!?
    - Jay

  • Need help with Airport Express and so on.

    Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
    My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

    DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
    The AirPort Extreme base station (AEBS) is a router so it will do what you need.
    You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

Maybe you are looking for

  • Is shaking an iPad bad ?

    Playing a game on my iPad and it tells me to shake the iPad, is this bad to do ?

  • How to trim in final cut pro x when there's a dissolve

    How can you trim a clip to be shorter after there's a dissolve in the transition area?

  • Personal Edition on Linux?

    Can anyone explain why one can license Oracle Database (any version) Personal Edition on Windows Server but not on Linux? Both OSs are designed to support multiple users, are they not? Ref: http://download-east.oracle.com/docs/cd/B19306_01/license.10

  • Insert via DB-LINK

    Hi, i'm trying to insert via dblink data selected from local table. Here is the code: create or replace type T_DATA_IDS as table of number(19); export_process_ids t_data_ids;And here is the query:     insert into process@archive       (select * from

  • Asking for Lights out Management?

    Running 10 iMacs & 10 Min Macs. We can lock, restart, power off, control, all of that. But as soon as we try to power on from shutdown, it comes up with ARD not active, and Lights out management not supported. Obviously LOM has been discountinued wit