Airport Express & Apple TV Setup Problems

I am having some strange problems with my network. First, I reset my Airport Express and went through the steps of connecting it to stream music, however, the Airport Utility will not recognize it after restarting (I can do a hard reset and it will find the unit, but then hangs up over and over at the same point).
Also, at the same time, my Apple TV is showing in iTunes, can stream music and movies, but is not showing in the Airport Utility and will not sync.
I am not sure what I might have changed...any ideas

I am on 10.5.8. When I do a hard reset the airport Express, the computer finds it, however, after going through the steps to add it to my network to stream iTunes, it restarts and the computer can't find it (light continuously blinks amber).
The AppleTV is showing in my iTunes, but NOT in my list of wireless devices and it won't sync. So it does stream movies and music, just won't sync. When I try and sync it, I get a firewall error, but I have my firewall settings to allow all incoming devices.
Should I just reset everything and try and start over?

Similar Messages

  • AirPort Express with PC -- Setup Problems

    Hi
    Just wanted to share my experience -- I wasted most of a day getting my AirPort Express network up. Problem was, the setup software assumes that you have a wireless card in your PC. If, like me, you have a simple ethernet connection to a wireless router, then the program apparently has no way of finding the AirPort Express.
    After hours of fumbling with suggestions on this forum, I finally found the tech support number and we figured out that I needed to run the setup program on my laptop, which does have a wireless card.
    I would STRONGLY encourage Apple to re-write its setup software to recognize this very common hardware configuration and work with it, lest more customers waste more of their time. I was THIS CLOSE to angrily returning the box. Now that it's up, I really love it, but I almost didn't get there.
    AirPort Express   Windows XP   No wireless card -- ethernet connection to wireless router
    Airport Express   Windows XP   No wireless card -- ethernet connection to wireless router

    I had the same problem as you did with the setup of the AX from a PC connected to the router by Ethernet. I was able to run the setup by using the "Other ..." button at the bottom of the Base Station Chooser and giving it the IP address of the AX.
    Does iTunes on the PC connected to the router by Ethernet find the AX? It doesn't for me. It works great from my other 3 PCs that are connected to the network by wireless. Of course, the PC with the problem is the one across the family room from the stereo ...

  • Airport Express Base Station Setup problem

    My new Airport Express Base Station (2nd generation) does not sense the internet using an ethernet cable.  The status light is green.  I am using a hotel's DSL system in Brazil.  When using the same cable, and connecting my laptop directly to the system, it senses the internet just fine, so I know it isn't the cable or the hotel.  Does anyone know of compatibility problems with this Airport model?

    Does the DSL service require PPPoE for authentication before allowing you Internet access? If so, then the device directly connected to the DSL modem would need to be configured as such.

  • Apple Airport Express  N Ethernet connection problems...

    Hello,
    I have just setup my apple airport express to connect to my belkin wireless N router F5D8636-4 v2 via Ethernet. I have turned all the wireless features off on the express as I'm only using it to send music to my DAC. It is assigned I.P by DHCP all other computers are manually asigned I.Ps so no conflicts. My computer is also wired to the router and running windows 7 64bit. It all works great apart from when I turn my P.C off.
    When I turn it back on it cannot find the airport express over LAN until I reset the apple airport express by powering it down and back on. Is this right? Surely not? OR when im finished with my hi-fi should I be turning the apple airport express off?
    Anyone got any suggestions?
    Cheers
    Dan

    problem due to firewall settings - resolved

  • AIrport Express / Spotify / Airfoil streaming problems

    Hello world! Hoping you can help....
    I have a Mac Book Pro and two hifi systems connected to my wireless network via two separate Air Port Express units.
    I downloaded Airfoil to allow me to stream music to these Airport devices from Spotify.
    Unfortunately the music constantly drops out, sometimes for minutes at a time. I can see the music is still playing on the Spotify App and the blue bar on the airfoil app is moving to show music is streaming through that too (before you ask I've checked volume and ensured Spotify is the chosen output!).
    Occasionally one audio system will play music whilst the other is silent, but usually both airport express units will fail at the same time.
    I live in a large block of flats, and I have always assumed that the problem was due to the number of wireless networks in the building... but then that wouldn't explain how the music is still playing on the app.
    A friend has suggested a Airport Extreme base station might help matters, but another friend has said that wouldn't really help.
    If anyone can help me with this problem it would be hugely appreciated. It's really frustrating!!!
    P.

    I have this same problem. The new Express was super-easy to set up - I didn't even have to do anything - but it does introduce gaps when I am streaming from services like Mog. My old Experss doesn't do that.
    Would love to know what the solution is - otherwise, I'm taking this back to the Apple Store.

  • Airport Express Faliure to Setup

    Hi Mac heads.
    I'm hoping you can help me with my airport express setup. All I'd like to do is use it to run music to my stereo system.
    I'm trying to connect to a 3rd party router (linksys wrt54g) which is running WPA personal with a hex password. I go through the setup assistant and everything works fine until the last reboot of the airport express. It says it's waiting for it to reboot but it doesn't. Once airport express reboots it goes to its kiss of death orange flashing light. There are no errors. Any ideas? Is it due to the security on the network. Thanks.

    First, welcome to the discussions.
    See if this link will help you.
    http://www.apple.com/airportexpress/airtunes.html
    Cheers Don

  • Airport express 802.11g connection problems

    I own both an intel mac mini and a macbook, both running Leopard. I also own an Airport Express, which until about 4 months ago worked flawlessly. Since about Jan or Feb, my internet connection (via AT&T DSL) has gotten so flaky that I wind up using a neighbor's unprotected wireless connection (as I am now), even though my router is literally 3 feet away from me! I can't even connect to my router! I live in a condo, and have been told the signals from other wireless routers are "stomping" on my own wireless signal.
    I have been told to move the router away from any electronic devices, but before this whole thing happened, my router was even closer to my computer than it is now, and worked without a hitch.
    What do I do with this? A guy at a local Apple reseller suggests I upgrade to the latest Airport Express (802.11n), but I want to make sure I explore ALL options before spending the bucks.
    PLEASE advise...

    I had the same problem with my AirPort Express. After much trouble shooting on the phone with Apple, they told me the same - that electronics were interfering and we needed to turn off all electronics. Did that and problem continued. They stayed their argument. I took the Airport Express router to a remote location where there was no chance of any interference. Problem continued. Again I called Apple - they stayed their argument. I convinced them to send me a new one. Fixed the problem. That one died about 1 week later. Called Apple again (and repeated the process). I asked them to send yet another new one. They said no because it was obviously MY problem - or something with the area where I was using it (even though I tried it in different locations). I took it to the Apple Store - they ran a diagnostic and yep, it was a problem with the router. So, I'm on my 3rd one -it's been working for a few years now.
    My diagnosis is a bad Airport Express. Don't let Apple tell you it's a problem with "electronic interference" because likely its a faulty device and they don't want to take the flack for it.

  • Will Time Capsule or Airport Express resolve my WiFi problem?

    Hi
    I have a regular 2.4 GHz WiFi router which i am using currently. The problem is there are too many WiFi users around me and it seems my WiFi keeps turning off due to interference. I have tried chaning channels but all in vain. Initially I thought it was a router issue but now I have turned off WiFi completely and using internet on ethernet cable and it has been working fine without any disconnection. So definitely it is the WiFi interference problem. I really want to use WiFi as i want the mobility. Do you think using a time capsule or Airport Express resolve this problem?

    It is troublesome. Use ethernet instead of wireless.
    Reset the whole network to factory and start again.
    Yosemite can see nothing that it does not setup itself it seems.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

  • Airport Express Apple TV and free wifi set up

    I have a vacation rental in a condominium and would like to set up Apple TV. I don't want to incur the cost of internet access. My husband has been able to pickup free wi-fi signal/s from the area for his laptop but the strength varies.
    I was wondering if I can use airport express to pick up and offer a stronger signal. Then use the Apple TV with it. Would I need a Mac/PC to set it up? My husband has a pc laptop and I have a Mac desktop which I can't transport. Can I use my ipod touch?

    So is the wifi actually there as a free wifi or are you just using someone else's who hasn't secured it. There may be problems with each. Free wifi often comes with restrictions, movie downloads my well be far too slow to be useful, you could try renting a movie on the laptop to test this.
    If you are just using someone else's that hasn't secured it, you could of course find that they do secure it should they discover often and frequent usage.

  • Airport Express/Apple TV Support?

    Hey,
    Have been searching through the forums but unable to locate any information around support for Apple TV With Aiport Express
    In short, I have an iMac, MBPro, iPad, iPhone 4 and Apple TV. Just moved in to a new flat and looking at how to get a multi room audio set up going on.
    If I get the airport plugs, I can jack speakers in to these thats clear, but can I stream audio from apple tv or better yet just my tv so I can get a surround sound set up in addition to the wireless music playback?
    Thanks

    Gwames
    Just worked on a similar situation.
    Client has iPad 2, Mac Book, Airport Express and Apple TV
    You're looking to get Multiroom so you might want to consider this link:
    Air play Multi Room Audio Speaker
    Here is some other information on Whole Home Audio
    And here are some tips and a video on Apple TV
    Just to let you know, Apple policy wants to make sure you know by visiting the links we might benefit by your visit such as you might decide to come back or you might tell friends and we could even profit somehow.
    Post any other questions you have.....and check out the video at the bottom of the Apple TV link, it has a suer short video

  • Airport express/Apple Tv to an Aircraft entertainment

    Hi Apple support community,
    We would like to create a WIFI network onboard of an aircraft (without internet connexion) via an Airport express box.
    Then to connect an Apple TV box to this wifi. This Apple Tv box connected to the aircraft entertainment.
    The connection between the apple TV and the aircraft will be done by an HDMI/AV cable.
    We would like to display video or audio from our Iphone 5s/ipad mini to the aircraft.
    Do you think that it can works ? 
    If the wifi speed will enought to watch movies ?
    Thanks a lot for your support and have a nice day
    all the best,
    Philippe

    Yes that should be fine. You would be streaming content stored on the iPhone or iPad over the local network so connection speed would not be relevant. It would be best to connect ATV to the router via ethernet.

  • Airport Express and Time Capsule problem

    We've had an AirPort express since 2006 that has always worked FINE for wireless printing and Airplay.  We just bought a new iMac and a TimeCapsule (2tb).  We replaced our netgear router with the TimeCapsule, and now we have problems.  First off, if the iMac goes to sleep when it wakes - although the connection to the Internet is intact - AirPort Utility will not be able to find any of the TWO devices from any computer in the house (MacBook, PC, and iMac).  Second, if we try AirPlay from iTunes we get this:
    And from there, everything again disappears from the AirPort Utility for a while........and then comes back and works fine.  Anyone know how to get rid of this hiccup?  sometimes it takes a while to come back, and we have to turn off one of the devices and turn it back on again.
    Thanks!

    So you replaced the netgear router with teh TimeCapsule, and configured the airport express to join the network correct?
    The iMac is connected to a LAN port on the TimeCapsule right?
    AirPlay works by first "finding," and then, establishing a secured communications link between the iTunes host and the TimeCapsule. Once this link has been established, it can then start the streaming process. Also periodically through the streaming, AirPlay checks to see if the link is still valid.

  • HT5022 Airport express 5.6 install problems on osx 10.7.5

    Anyone know why everytime I try to install airport express 5.6 on osx 10.7.5 it gives me the error "installation failed". I've tried several times to reinstall it but I keep getting the same error

    Please check at the very top of the post for context. The user is posting regarding.......
    AirPort Base Station: How to set up and configure an 802.11g AirPort Extreme Base Station or AirPort Express in OS X Lion
    AirPort Utility 6.2 in Lion or Mountain Lion does not support an older 802.11g device, so advising the user to download and install AirPort Utility 6.2....when it is very likely already installed on a Lion or Mountain Lion machine .....does not solve the issue here.
    AirPort Utility 5.6....which the user needs to configure the 802.11g AirPort Extreme.....cannot be installed on 10.7.5 or any 10.8.x Macs without using some workarounds.....not supported by Apple as far as I can tell.
    Can you advise on this?

  • Airport Express/Extreme w/Stereo problems

    I missed tech support by 3 minutes tonight and am hoping someone "out there" can help me. I'm having a party tomorrow night and would really love my iTunes to be playing on my speakers by then!
    I can't seem to get my Airport Express to show up on my computer(s).
    Here's what I've got, then I'll ask questions:
    iMac hooked up to Airport Extreme Base Station for printer and cable modem internet, as well as for wireless networking with my iBook. The iBook obviously has an Airport Card, but the iMac doesn't, because it is directly hooked up to the base station. I thought that the iMac and the Express weren't seeing each other, perhaps, because there is no Airport Card in the iMac. But, when I tried the same on my Airport Card equipped iBook, I still get no recognition, even after running Airport Utility again on both computers.
    Questions:
    1) Any obvious answers?
    2) Even though my iMac is hooked up to the wireless network via wires, does it need an Airport Card?
    3) What port should the monster cable go into on my receiver? It is an old one (1993) and has no auxilary input ports, so I tried to use Phono (is that a dumb move?)
    I know it is a lot of questions, but I am desperate and you all seem to know what you're doing all the time!
    Thank you!

    Questions:
    1) Any obvious answers?
    You have no available ethernet ports for the Express to be plugged into so it must get connected to your network wirelessly. This is possible but to configure it you'll want to temporarily connect to it with ethernet. Then use Airport Admin Utility (not Airport Setup Assistant) to connect to the Express and make it "Join an existing wireless network (Wireless Client)" with your wireless network's name and security requirements.
    2) Even though my iMac is hooked up to the wireless
    network via wires, does it need an Airport Card?
    No.
    3) What port should the monster cable go into on my
    receiver? It is an old one (1993) and has no auxilary
    input ports, so I tried to use Phono (is that a dumb
    move?)
    Phono is a bad choice since it gets extra amplification. If you have an available tape recorder input use that. If one isn't available unplug your tape recorder for the New Year's Eve party! Hope that helps.

  • Airport Express for AirTunes. Problems.

    I have a Windows XP computer and Laptop with a Linksys G wireless router in my house. Laptop connects to the router wirelessly and the desktop is hard connected to the router. Everyone is talking to each other nicely and I decided to invest an Airport Express for the sole purpose of playing itunes from my computer on speakers in another room.
    I bought the Airport Express and have had nothing but disaster. I don't want to use it to create another network, just to "join" my existing network. So the first thing I do is plug it in with only the speaker connection plugged in. I have not plugged in an Ethernet cable or anything else.
    According to the "manual" it is supposed to go solid yellow, blink and then go solid green. Because my home network is PW protected, I would have thought it could not "connect" to it on its own, but from just plugging it in to the wall outlet, I never get solid green, just flashing yellow, which apparently is bad.
    Anyways, I use the software (updated over the net of course) to set up and it is looking for a "base station" (which is confusing to me because I don't have an Apple base station, I have a linksys router and the stupid Airport Express box plugged into the wall). At any rate, it "finds" the Apple base station and appears to treat it as an unsecured Apple network, with some funny id. I do "manually configure" and I tell it I want to use it for AirTunes, and I don't want to create a new network, I want to join it to an existing network. I give it the SSID of my home network as well as the 64 bit encryption key (that is not autogenerated, but that I manually type in), and that's it.
    While I am able to get a message that it is ready to use (and I no longer see "Apple XXXX" as one of the available networks when I scan for available networks) the light on the Airport Express never stops blinking yellow, and it has done something to my home network because my laptop now is unable to keep a wireless connection to the router. I checked all my settings and they all seem to be ok, my desktop which is hard wired connects fine, but my laptop either won't connect at all, or connects and then drops. I have re-started everything including the router (not re-set, just unplug and plug back in) but my laptop now is totally not connecting and the Airport Express still doesn't work.
    Sorry for the rant, but any suggestions?

    Hello Birdman325. Welcome to the Apple Discussions!
    Because my home network is PW protected, I would have thought it could not "connect" to it on its own, but from just plugging it in to the wall outlet, I never get solid green, just flashing yellow, which apparently is bad.
    Not necessarily. A flashing amber status light generally indicates that the AirPort Express Base Station (AX) is not connected to a network. Since the default configuration of the AX is a wireless Internet router, the flashing status light would be normal.
    Anyways, I use the software (updated over the net of course) to set up and it is looking for a "base station" (which is confusing to me because I don't have an Apple base station, I have a linksys router and the stupid Airport Express box plugged into the wall).
    The AirPort utilities are specifically designed to work only with AirPort base stations, so it would be normal for it to try to "find" base stations.
    At any rate, it "finds" the Apple base station and appears to treat it as an unsecured Apple network, with some funny id.
    Again, normal. Remember the default configuration of a powered AX is a wireless Internet router ... since you don't have it connected to the Internet, the utility will find it as a stand-alone wireless network that is unsecured.
    While I am able to get a message that it is ready to use (and I no longer see "Apple XXXX" as one of the available networks when I scan for available networks) the light on the Airport Express never stops blinking yellow, and it has done something to my home network because my laptop now is unable to keep a wireless connection to the router.
    Let's double-check your AX's settings ...
    Perform a "factory default" reset of the AX
    o (ref: http://docs.info.apple.com/article.html?artnum=108044)
    To set up AirTunes on the AirPort Express Base Station (AX), either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    o Wireless Network: <select the existing Linksys wireless network>
    Music tab
    o Enable AirTunes on this base station (checked)
    o Enable AirTunes over the Ethernet port (optional)
    o iTunes Speaker Name: <whatever you wish>
    o iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

Maybe you are looking for

  • ORA-00980: synonym translation is no longer valid

    Hi I get the following error when try to insert xml SQL> ed Wrote file afiedt.buf 1 insert into "bulkCmConfigDataFile_TAB" 2 values( 3 XDB_UTILITIES.getXMLFromFile('Test.xml','DATA_DIR'). 4 createSchemaBasedXML('http://127.0.0.1:8081/public/xsds/conf

  • Download SPOOL to an internal table in Background

    Hello, I want to Download the Spool to an internal table, but in Background, the functions RSPO_RETURN_SPOOLJOB RSPO_RETURN_ABAP_SPOOLJOB don't work. Does anybody know another function or way to do it? Thank you very much, Maite.

  • "Network out of order" and "Short message transfer rejected"

    Guys, I have a BB 9300 3G Curve and I have trouble sending SMS. This is a peculiar problem since I #1 am able to send an SMS problem free sometime #2 get an error message saying "Network out of order" #3 get an error message saying "Short message tra

  • Error installing SMP 3

    Downloaded smp 3 from marketplace but getting error installing it- runtime and SDK same error. Please find screenshots attached . Any suggestions are appreciated. PS : Admin privileges are to the user. Tags edited by: Michael Appleby

  • Need Help in Joins.

    Hi all, I have some tables in my schema which are joined this way... Product---< Policy---------< Policy_Cover_Fact-------------< Claim_Fact--------------< Claim_Payment_FactThese are the main tables, You can see three facts are joined to each other.