Airport Express as wifi audio for ip camera?

Hello all. I have a question regarding Airport Express's audio transmitting capabilities. First, I recently purchased an Airport Express to expand the wifi range in my new house. The house is one floor, and my Linksys N router is located on the other side of the house from my bedroom. The signal from the Linksys is spotty at best in the bedroom, so I have the Airport Express connected via CAT5 in bridge mode in my bedroom. The signal is great and everything has worked fine so far with that setup.
The reason that I needed wifi stronger in the bedroom is that we have 2 IP cameras that we use as baby monitors for our toddler and newborn. We have a Trendnet system, which includes a 7" wifi monitor that displays multiple Trendnet cameras connected to your network simultaneously. That all works great as well, with only one drawback. The monitor does not support audio from the 2 IP cameras at all. So I get video but no audio, and the audio is important when using them as baby monitors.
The IP cameras are audio capable, and you can actually hear the audio when you access the cameras from your computer. The only problem is that we have a desktop at home and no laptop (although I recently purchased an iPad, but all IP camera apps that I seen so far have the same lack of audio issue). The IP cameras also have a 3.5 mm output jack on them, so you can hook up speakers to them to extract the sound that way.
My question is this...if I purchased a 2nd Airport Express, is there a way that I could connect the audio output to an AE (through the 3.5 mm jacks) by the baby's camera, and then have the audio wirelessly transmitted to the AE in our bedroom (hooking up a small set of speakers to the AE in the bedroom as the output for the audio)?
I'm very new to the Airport Express world, so any help would be appreciated.
Thanks in advance!

My question is this...if I purchased a 2nd Airport Express, is there a way that I could connect the audio output to an AE (through the 3.5 mm jacks) by the baby's camera, and then have the audio wirelessly transmitted to the AE in our bedroom (hooking up a small set of speakers to the AE in the bedroom as the output for the audio)?
Sorry, but no. The audio port on the AirPort Express Base Station (AX) is an audio OUTPUT port, not an input port ... so connecting the output audio from the camera via this port won't work. The AX's audio is dependent on receiving an AirTunes (or ROAP protocol) stream over IP ... typically from iTunes (or as Jolly has pointed out via a third-party solution like Airfoil).

Similar Messages

  • Airport Express as wifi card for Xbox Live, then connect to Extreme network

    My son just got xbox Live and we're trying to use Airport Express as wifi card for xbox (connected to xbox via ethernet). We use Airport Extreme as router for the house.
    We're having trouble setting up Xbox Live, keep getting stuck at getting the xbox to communicate/access the web. Error reads "can't obtain IP address from router... make sure DHCP is enabled and has a large enough address range for all devices on network.. also make sure MAC filtering allows your console's MAC address or is disabled... "
    We dont' know what else to do. I'm at wit's end before giving Gates $100... Anyone know how to get connected?
    Thank you!

    You can also perform a simple test to verify if you have an internet connection at the ethernet port on the AirPort Express.
    Move a laptop near the Express, turn off the wireless on the laptop, and connect to the Express using an ethernet cable. See if you can open your browser and get a good solid internet connection.
    If you can, the Express is setup correctly and you know that you have an internet connection reaching all the way to the Xbox.
    If you can't then there is a configuration error somewhere and it will need to be identified and corrected.

  • Airport express an Wifi audio

    Hi,
    I need help. I'm using airport express for audio, but when there is a lot of phone , either not connected to my wifi, the audio does not play normally . How can I resolved it ? Is it could be better with making my ssid invisible ?
    Thanks in advance

    You can mitigate the effects of wireless interference by using the Express's 5 GHz network, if it is capable of it. All Express models produced within the last five years can create a 5 GHz wireless network, but only the newest iPhones can use 5 GHz.
    ... Is it could be better with making my ssid invisible ?
    No, unfortunately this will not help.

  • Trying to install Airport Express kills wifi connection for all devices!

    I changed the wi-fi security from WEP to WPA2 on my parents Westell 327w (802.11g) and I updated their iMac, iPod touch and their iPad. All good. Then I get a call from them that the light on the Airport Express (AE) is staying yellow. Crap, I forgot to change that. So next time I'm there I unhook the Ethernet cable from the iMac and plug it into the AE and use the Airport Utility to change the security setting (first I reset it). It gets to the point where it is updating and it seems to be taking forever and I happen to look at the iMac Airport menu bar icon and it shows what I interpret as a dropped connection (no bars) (the iMac was on wifi since I was using the Ethernet cable for the AE). Airport Utility reports an error of some sort and wants me to restart it. Every device -- iPad, iPod touch, iMac -- does not connect because they no longer recognize the WPA2 password. I put the Ethernet cable back into the iMac so I could use the web interface for the Westell and after an hour of deleting settings, hitting forget connection, and disabling and re-abling WPA2 security somehow I got wifi going again. Then I decided to try the old AE again. Same thing happened all over again. UUUUGGGGHHH!!!!! Please, for the love of God, can someone tell me what is happening? Sometimes the Westell drops connections (like to the iPad) but usually turning it off and on restores it. Maybe it just dropped by coincidence as I was updating the AE but I've never seen all devices not recognizing the WPA2 password. Does anyone have any idea what is going on? Thanks.

    Open Airport Utility (open Spotlight and type Airport Utility) and follow the on-screen instructions. If you still have trouble give AppleCare a call this can walk you through the process.

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • Airport Express Ethernet WiFi bridging with 3rd-party wireless base?

    I want to use an Airport Express as a substitute for a very-long Ethernet cable. Essentially, I want to connect a device (say, a computer) to the AE using an Ethernet cable, have the AE connect to a base station (not an Apple device) via wireless, and reach the network (Internet) on the other side of the base.
    A diagram of the desired goal is at http://img.skitch.com/20091111-1j7a61eka32jqntm217wwg7d3g.jpg
    I'm baffled. Here is what I've done:
    -Reset the AE to factory defaults
    -Connected a laptop to the AE via the Ethernet cable. Turn off my wireless (to make sure I'm talking to the AE via wired connection; this confirms the AE Ethernet port is working.)
    -Configured the AE (via the Ethernet cable) in a variety of ways (see below), restarted it.
    (alternately)
    -Reset the AE to factory defaults
    -Connected a laptop to the AE via wireless (connecting to the default-named network the AE creates on factory default reset)
    -Configured the AE in a variety of ways, restarted it.
    (This essentially suggests the AE is fully functional and not failed; I'm successfully able to connect to and configure the AE after factory default reset either wired, or wirelessly.)
    I've tried various configuration attempts, but the one that seems to get closest - but still fails the goal is this:
    -On "Airport / Wireless" tab: Join Wireless Network
    --(I've entered my SSID for my network in the Wireless Network name field)
    --(I've selected WEP 128 for security. I don't think I should be using WDS, given what I've seen elsewhere about WDS only working with an Apple Extreme.)
    --(Of course, I've confirmed the passwords match)
    -On "Internet / Internet Connection", the "Connect using" dropdown is disabled / greyed. This appears to only be enabled when I select "Participate in a WDS network" in the Wireless tab - which (as I said) I don't think I can use.
    -On "Internet / Internet Connection", the Configure IPv4 is set to use DHCP
    On restart, the AE successfully starts - it get's its IP address, the FIOS base station sees the device and lists it as online, and I can transmit audio successfully from iTunes to the stereo via the AE.
    BUT, configured this way, the Ethernet port is not providing network connectivity to the device attached to the AE via the Ethernet cable -- the same Ethernet cable that was moments ago letting me talk to the AE to configure it is now not active. When I attach my MacBook to this cable and open System Preferences and look at the Ethernet connection, it shows as not even having a cable plugged in; there's no Ethernet link / carrier present. (Until I do a Factory Reset on the AE, after which it works fine again.)
    Note: My AE is about 2-3 years old. I initially / previously had this configuration working just fine after I first installed the AE (after much pain, I recall). But I recently had Verizon installed, and in the process they put in a new base station. I seem to not be able to re-create the configuration I had that was working before.
    Note 2: I'm attempting to use the wireless base station supplied by Verizon FIOS, which supports a ton of connectivity options - though it doesn't list (and therefore I'm assuming doesn't do) Apple's WDS.
    Note 3: When I had it working before, I could have sworn the AE was also acting as a wireless base station that I could see in my available wireless networks listings, and was able to connect to the Internet wirelessly through it - as if it was a repeater of some kind. This isn't crucial; but it could be helpful in diagnosis.
    Note 4: I think I may have previously had the AE connecting via another device: I also have a Netgear WG602v2 that was connected BaseRouter---Netgear((( ))) AE---Device (where --- is an Ethernet wire, and ((())) is a wireless link). HOWEVER, I can't be sure this is how it was working; this may have been a relic from attempts to get it working originally several years ago. It is not essential.
    What am I missing?

    It sounds like you have an older 802.11 b/g AirPort Express, which as Duane mentions will not function as you would like.
    The newer AirPort Express 802.11n has a function called ProxySTA which allows the device to join (according to the attached article) virtually any wireless network with an option to "enable ethernet clients".
    While it is not possible to know whether any wireless network will be compatible with this feature, it has worked on a 2Wire and Netgear router that I've tried. Haven't tried Verizon Fios, so I can't assure you that this will work as you desire.
    http://www.macworld.com/article/132754/2008/03/express11n.html
    Another option might be to use a pair of ethernet powerline apapters, providing that everything is on the same master electrical circuit. In general, I've found the adapters to be more reliable and better performing than wireless, but of course, your mileage may vary. Post back if you need more info on this option.

  • Does airplay work with airport express without wifi?

    I would like to stream music from my Macbook Air to my stereo using Airport Express. However, it is my weekend home in which there is no wifi connection. Will it still work or does Airplay require a wifi conenction to the internet to work?

    Yes, you should be able to get it to work. I tried it just now with an older AirPort Express, and it works for me, but the configuration and settings are rather unconventional.
    Set the AirPort Express to create a wireless network with no security code— it may work with one but maybe not. Configure the AirPort Express in Bridge Mode with respect to the Internet, and assign it a static IP address of, say, 192.168.4.1.
    I made a wireless connection to the AirPort Express from an iPhone 5 and was able to play music from my iPhone to speakers attached to the AirPort Express. Interestingly, the iPhone doesn't actually make a full connection to the AirPort Express but the wireless network name shows up in its Settings.
    The iPhone has a self-assigned 169.x.x.x IP address, but I am able to choose the AirPort Express-attached speakers from the Music app on my iPhone.
    There may be a cleaner way to do this, but one way or another you should be able to get it to work.

  • How to set up Airport Express in Bridge mode for hotel use

    Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

    +"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
    AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
    If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
    http://support.apple.com/downloads/#airport

  • How do i set up an airport express as an extender for my airport extreme

    how do i set up an airport express as an extender for my airport extreme

    Check these discussions:
    Best bets to extend/boost signals from Airport and AP Extreme
    How to extend and Extreme network using Express

  • Airport express, guest wifi, time capsule all muddled up - Looking for Bob Timmons!

    My operatign system is OS X 10.9.1
    Airport Express Time capsule 1 TB
    I have had my airport express time capsule for 2 years (1 TB)and it worked pretty near flawlessly since then.  It started with the time capsule being too full and that got me messsing with it.
    I could not fugure out how to delete files from the time capsule and it was not writing over old ones.  I have seen the same problem on here already. (In the end I bought an external drive and now that seems to have solved it and is scurrently bqcking up to the exteranl, even though I deleted a bunch of old files and my computer is now hovering around 830 MB it still won't back up to time capsule a stime capsule states it is hovering around 965 MB .  If you can help me on this part that is great.   )
    Then I tried to reset my AE device.  WIth that I had to reset my network.  this is where the problems began.
    Previously my AE had a steady green light and hosted two wifi names (mine and for guests).
    Now if I click not bridged (?) then I can not get Internet access on the guest network, i get the signal and it is there just no internet connection.  If I click DHC and Nat it constantly blinks amber but the guest network is  there and i have internet.  I have gone back and forth with this and it is consistently behaving like I described above.
    I have done a reset.  I have done a reset and unplugged the machine (though I admit I did not wait two minutes, closer to 45 seconds)
    I want to go back to the steady green light and the two wifis established as before.
    Also one  more thing to add.  My Server name has disappeared too.  I get an error message that says
    There was a problem connecting to the server "name"
    The server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, then try again.
    Seems I did a great job messing with this today.
    Can you please help me?

    In its default state, the 802.11n AirPort Express Base Station (AXn) will broadcast an unsecured wireless network. It does not need to be connected to another network or the Internet to operate this way. Wireless clients can then connect to this wireless network, but as you know, none will have access to the Internet. Both your Mac and iPhone should have no issues connecting to this network.

  • Airport express has a port for audio out that says optical?

    So I just got my Airport Express and want to use it to Airplay to my stereo.  It has a minijack for that, but in the setup guide it talks about optical output.  I don't understand minijack and optical in the same hole.  I don't want to break it jamming the wrong thing in there.  Can anybody enlighten me?

    Either an analog 3.5mm stereo mini plug will fit in the audio port.....or....a mini Toslink optical digital plug will fit very nicely in the audio port.
    If you plug a 3.5mm stereo mini plug in the audio port, an analog audio signal will be delivered to your amp/speakers.
    If you plug a mini Toslink plug in, an optical digital signal will be sent to your amp/speakers
    The audio port on the AirPort Express is smart. It knows what kind of plug is connected, so it knows whether to send an analog signal or a digital signal.

  • Using Airport Express as Ethernet Access for Network Audio Receiver

    Hello,
    I have a quick question.
    I recently bought a Onkyo CR-N755 Network receiver.
    I would like to take advantage of the network radio functions, but am running into a problem.
    I created an "Internet Sharing" set-up so that my macMini shared it's wi-fi signal over Ethernet, but it seems that this creates a new network as the receiver shows that it has IP address 192.168.2.3, where as everything else in the house is on 192.168.1.xxx. The receiver was able to access internet radio, but I could not find it with the controller app on my iphone, presumably because it was on a different network.
    I think that the easiest solution would be to buy an Airport express and Connect the receiver to it by LAN.
    In order to do this, would I set up the express as a bridge, create a new network with the same settings as the Extreme, or would I have to extend the network? I have read that bridging reduces bandwidth, so I would prefer not to do that if possible.
    So can (and how do) I go...
    Airport Extreme  --wireless--  Airport Express --Ethernet-- CR-N755  while still keeping full bandwidt for the 3 ipads, 2 iphones, 2 wifi macs, appleTV, and numerous connected gaming systems that I, my wife, and 3 children use?
    Thanks for any help you can offer.

    In order to do this, would I set up the express as a bridge, create a new network with the same settings as the Extreme,
    This option would require a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express. This will provide full bandwidth over the entire network.
    or would I have to extend the network
    This setting would be used if you plan to connect the AirPort Express to the AirPort Extreme wirelessly. There will be some unavoidable loss of bandwidth over the network with this type of setup.....approximately 30-50%, depending on a number of factors.

  • IMac (on Ethernet) Can No Longer Stream to Airport Express (on WiFi)

    After years of reliable service, all of a sudden I cannot stream music from iTunes on my iMac, via my Airport Express, to my stereo system.
    First, a bit about my configuration:
       * iMac connected via Ethernet to a wireless router (D-Link DIR-655).
       * iMac Airport (WiFi) is turned off.
       * D-Link sets up a wireless network, and Airport Express joins the network.
       * Airport Express does not set up its own network, it's simply a client of the existing D-Link wireless network.
       * iTunes "sees" the Airport Express, and can stream audio via AirPlay.
       * iPad also joins the wireless network, and also can stream to the Airport Express via AirPlay.
       * iMac running 10.6.8, with all software updates applied.
       * Airport Express running latest firmware (7.6.1).
    Well, that was a few days ago, when "it just worked". But for some unknown reason iTunes could no longer "see" the Airport Express.
    So I took my Airport Express to the Apple Store and they did a Factory Reset, but it did not solve the problem. I figured my rather old Airport Express was failing, so today I bought a new one. The symptoms have changed a bit, but even after spending an hour on the phone with AppleCare, it doesn't work properly.
    Now, the only way the iMac can stream to the Airport Express is if the iMac also joins the wireless network. In fact, now with Airport turned OFF on the iMac, the Airport Utility cannot see the Airport Express. But here's another weird thing: when I use the IP address of the Airport Express, the Airport Utility CAN connect with and manage the Airport Express, even with Airport turned OFF on the iMac!
    I should also mention, the iPad has no issues whatsoever connecting to the D-Link's wireless network and streaming music to the Airport Express.
    This all seems like something might have changed on the D-Link wireless router. But for the life of me, I cannot figure out what setting(s) on the router might allow the iMac - over Ethernet - to stream audio to the Airport Express.
    Another thing. When I have Airport turned on on the iMac, it can "see" and stream to the Airport Express, but the music has very frequent drop-outs. Could this be related to the fact that the iMac has two IP addresses (one on Ethernet, one on WiFi)?
    My goal is to get things "back to normal", where I can turn off Airport on the iMac, and all LAN and WAN traffic from the iMac goes over Ethernet. I have a few questions (for now :-)
       * Since my iMac has two connections to my LAN using two IP addresses (Ethernet & WiFi), is that likely to cause any issues?
       * When two computers join the same wireless LAN, can they effectively talk directly to one another, or does the wireless router need to be involved every time one computer sends a TCP or UDP packet to the other?
       * Do routers (or the DIR-655 in particular) tend to have any firewalls or policies that control connections on the LAN between Ethernet and WiFi clients?
       * Since AirPlay uses TCP port 3689 and UDP port 5353, would the DIR-655 need any special configuration to "open these ports" so an Ethernet client can connect with a WiFi client?
    So, any help would be most appreciated!
    Thanks!
    Jim

    I am having a very similar issue.  I use my Airport Express (AX) to stream music from the computers on my network to my stereo via Airplay.  I have AX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem.  I can succesfully connect all of my wireless devices via Airplay, through iTunes to my AX, including two laptops and an iPhone.  However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my AX.  Similar to your case, I can see the Airport Express from my PC through my Airport Utility by directly typing in the IP address.  Note that the  AX set-up option to allow Ethernet clients is checked.  I also noticed that my laptops will stop detecting AX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards.  They will resume detecting AX when I turn their wireless connections back on.  I have tried every conceivable setting of my D-Link router to no avail. 

  • Airport Express and the audio output.

    I bought an Airport Express sometime last year, when it first came out. I don't have any of the packaging or the manual with me. What I would like to know is if Airport Express had support for both analog and optical audio output right from the start (when it was first released).
    Thanks.

    Since its release over a year ago, there has only ever been one hardware version of the Airport Express. Therefore - yes - a combo analog/optical digital output has been built into the Airport Express right from the start.
    You can download PDF versions of all the manuals at:
    http://www.apple.com/support/airport/

  • How do I use the new Airport Express as an extender for a non-Apple router?

    We have an "Arris" router in our house and are thinking of buying an Airport Express to extend the internet. How can we use the Airport express as a repeater on a non-Apple router without having to use millions of ethernet cables?

    Apple designed their "extend a wireless network" to only work with other Apple routers wirelessly, so it would be extremely unlikely like it would work with an Arris wireless router.
    Your best bet is to always use products from the same manufacturer if you need this type of feature on your network to insure compatibility.
    If Arris does not offer a product for this purpose, a "universal" extender like the Netgear device linked below might be able to do what you want. It was not "universal" enough to extend an Apple network when I tested a device recently.
    Universal WiFi Range Extender (WN3000RP) - Netgear

Maybe you are looking for