Airport express base station a1264 was working great.

Hi
I have airport express base station a1264 and it was working great. Updated to Maverick and the utility now is 6.3.2. It seems now itunes drops occassionally.
I only want this AX to be a remote Stereo connection for my itunes. NO INTERNET
Connection goes as follows: Mac Mini Wifi to AX ---> Toslink to Cambridge Magic Dac100 to RCA to Pre-AMp. All was great for a couple of years.
Now it drops - annoyingly so!
I tried to update the firmware and then tried to re-configure but I can't seem to get it to ignore INTERNET connection.
It seems to work - but the MAC MINI has the exclamation over the WIFI icon - says no internet connection - which I don't want. Why is it looking for internet. I set up a new network and set the SSID as STEREO WIFI which itunes will connect to....
Do I care about the exclmation point? Never saw it - ...
THanks
Merry Christmas
Art
OSX 10.9.5, MAC MINI, Airport Utility 6.3.2 - Airport Express A1264 - a few years old....

Gregpharris wrote:
This was working a week ago. I unplugged it for a move and now I get nothing. No light - it's like it's not connected to the power.
Locate the reset button, which is a small, circular gray, flush button near the connectors. (See the diagram on page 7 of this manual: http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide.pdf .)
Press in on that button while you plug it in. Continue to press for maybe 20 seconds. If you don't see any sign of the status light flashing during that time, then your Express may be dead.

Similar Messages

Where can I purchase a replacement CD for the Airport Express Base station A1264?

Where can I purchase a replacement CD for the Airport Express Base station A1264?
I'd like to sell my Airport Base Station, but I believe I need a CD with the software on it for the new owner. Anyone know where I can find one?
Thanks!
Meredith

I doubt it is available.. and since a new Mac doesn't even have an optical drive.. there is no need whatsoever today for the cd.. it is all available in the OS or download. In fact the stuff on the cd will now be totally out of date.

Will older Airport Express Base Station A-1084 work with new AirPort Extreme? I want to use it as an access point for my ps3 for watching movies and just connectin to Internet.

I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.

This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster.

Airport Express Base station: iMac and iBook

I just purchased the Airport Express Base Station. I have an iMac with an Airport Extreme card and an iBook with an Airport card.
I can connect to the internet with the iMac but not with the iBook. The iBook is not even recognizing the airport.
Which is weird because when I first set up the Airport Express Base Station I was able to connect to the internet with my iBook. Then I set up the iMac as a base station, went back to the iBook and couldn't connect to the internet again.
So my iMac can connect to the internet but not the iBook??????

Then I set up the iMac as a base station...
Why did you do that if you have an AirPort Extreme base station (AEBS)?

Cannot configure and connect to Airport Express Base Station Model A1264 with Windows 7 (x64)

I am not able to connect Airport Express Base Station Model A1264 with Windows 7 (x64). I did a factory reset, uninstalled and reinstalled the AirPort Utility for Windows v. 5.6.1.
My objective is to extend a non-Apple WiFi network with Airport Express Base Station Model A1264 and use it for direct ethernet and/ or wireless connection. Any guidance as to how I can get set up here?

This is very common, we run a mix of mac and various pc brand desktops and laptops, what I have found is that using the windows wireless client rather than manufacturers on some laptops helps, getting the latest wireless drivers from the manufacturer has helped, make sure all your windows updates XP and Vista are current.
If all the above is covered try the different WEP WPA WPA2 variants or even without for test purposes. I have most success with WPA2.
Finally I am assuming your running the latest firmware on the express unit, whilst this hasn't attributed to better connectivity for us I did it regardless.
Message was edited by: Fence Rider

Airtunes with Airport Express Base Station stopped working for no reason

Hello,
I used to play music through AirTunes with no problem. I have an Airport Express Base Station and I'm connected to it with an Airport Extreme Card built-in my iBook G4. When I came home after day at work (with the iBook, which is connected in there to wireless access point but not Apple), Airtunes is not working. Also I can not see my (not closed network) Base Station in Airport Admin Utility, internet connection is still working fine. If I connect to the Base Station by pressing button Other, manually type IP of Base Station I can connect to it and administrate it. Airtunes is allowed there, in iTunes too but it is just not working, I don't know about anything that could has been changed. I think nothing has. AppleTalk is runnig only on Airport card. Thank anyone for any advice. I tried to update firmware in the Base Station today and no software update is available.
I created log /var/log/all.log (.), when I reconnect to the network I can see this there:
May 31 17:37:07 jz-iBook kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown complete
May 31 17:37:02 jz-iBook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[248]: exited abnormally: Hangup
May 31 17:37:02 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:02 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
May 31 17:37:04 jz-iBook lookupd[352]: lookupd (version 369.5) starting - Wed May 31 17:37:04 2006
May 31 17:37:08 jz-iBook kernel[0]: AirPort: Link Active: "www.net23.cz/ziizii" - 0014516f4efd - chan 1
May 31 17:37:08 jz-iBook configd[59]: AppleTalk startup
May 31 17:37:11 jz-iBook launchd: Server 4e3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[352]: exited abnormally: Hangup
May 31 17:37:11 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:11 jz-iBook lookupd[354]: lookupd (version 369.5) starting - Wed May 31 17:37:11 2006
May 31 17:37:14 jz-iBook configd[59]: AppleTalk startup complete
May 31 17:37:26 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
iBook G4 12" Mac OS X (10.4.6)

Please perform a "factory default" reset on your AirPort Express. Note you may need to do this a few times to make sure it "sticks." Once completed successfully, the status light should flash amber NOT green.
This type of reset will reconfigure the Express to its factory settings. That is, it will broadcast an unsecured Wi-Fi network with a network name (aka SSID) of something like: Apple Network NNNNNN
Can your Win7 computer find and connect to this network now? If it can, then do so and the AirPort Utility on the PC should now be able to find the Express.

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

DOES THIS WORK WITH AirPort Express Base Station with AirTunes?

If i purchase AirPort Express Base Station with AirTunes, will I be able to hook it up to the speakers of my home dvd theatre system?
Also whiich is better, the AirPort Express Base Station with AirTunes or the Refurbished AirPort Express Base Station with AirTunes?
THANK YOU.

If i purchase AirPort Express Base Station with
AirTunes, will I be able to hook it up to the
speakers of my home dvd theatre system?
I would say yes.
Also whiich is better, the AirPort Express Base
Station with AirTunes or the Refurbished AirPort
Express Base Station with AirTunes?
They are the same, just happens one has already been used/owned/overstocked/etc...
iFelix

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Airport express base station too old?

I keep intermittently losing my wifi connection with my Macbook Pro. However, my iPhone and my iPad have no problems jumping on the wifi connection.
I have an XBridgeDSL ethernet router modem which is paired with an Airport Express base station and both of them are about 13 or 14 years old. I installed Mavericks when it came out, everything seemed fine, but am wondering if it was a step too far for my poor old kit.
I can get wired connection with the computer no problem, and right now I've managed to get Wi-fi - but it randomly disappears, and the network doesn't show up in the list of available networks.
I've just run Airport Utility and it finally showing my base station, but says it doesn't support it.
Am I having these problems because my base station is too old now?
I don't really want to incurr any unnecessary expense of buying new kit if I don't need to...
At the moment I have to switch between wired and wifi depending on which device I want to use which isn't great.
Any further advice or tips would be great.
Best
Heather

Hi,
Yes, that's exactly the same message I got with my base station (but in English). This has worked for me:
-Disconnect from wifi
-Moved computer very close to the router
-Place ethernet cable from router modem to computer, connect to internet wired.
-Left it for a few hours, then put the ethernet cable back into the airport express
-After about 20 mins I went back to the computer and noticed it was connected to wifi again
-Haven't turned it off since so OK so far
-Found a new internet supplier who will supplier a wireless router modem free of charge and signed up. I just have to hang on till 11th Jan!
Slightly unorthodox perhaps, but it's worked
Good luck with yours, my feeling is that my Apple base station is now too old and no longer supported. Also I suspect I'll get better internet download speeds with the new router modem, currently only getting 4000mbs compared to a possible 120,000mbs in our area, and my upload speed is about 0.4mbs.
H

Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
Fmsalazar

Apple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

Airport Express Base Station no longer detectable by my computer

Ever since I went wireless last year, I have had a love-hate relationship with my Airport Express Base Station. It seems to take forever and a day to configure the sucker, then, somehow I do and it works well for several months - until something happens to muck up the works. That thing seems to have happened this morning when Earthlink's DSL connection got wonky (it was a glitch that apparently covered a large part of the country). That glitch apparently worked itself out, but after I put my MacBook to sleep in order to get lunch, suddenly my PPPoE host went missing when I woke the machine up. Further examination indicated that, although my wireless network was still there, the MacBook could no longer find my Base Station, even though the light was still working. Resetting the Base Station does not help. I am at my wit's end here. I can work via Ethernet DSL line, but I have become used to wireless, and without a viable network, my Mac mini can't connect to the Internet. Help!

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

Airport Express Base Station and HP Laserjet 1020 printer connected

Dear all,
I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

Hallo everybody,
Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
Conclusion:
1. The USB cable must be plugged into the airport express before turning on anything.
2. Turn on the printer first.
3. Turn on the airport express and the computer.
4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
5. Disconnect the USB cable from the airport express and connect it to the PC directly.
6. Print a document.
7. Disconnect the cable and reconnect it to the airport express.
8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

Airport Utility not seeing Airport Express base station

Since I got access to cable internet a few days ago, I've been using my Airport Express base station with no problems on my MacBook. Today I tried to set up my roommate's PC (she has Vista, if that matters) so she can get online. So we downloaded the AE Utility for Windows, then reset both the modem and the AE base about two times, but her computer won't see the Express base at all when it scans.
Any ideas? Do we need to go into her Network preferences on the Control Panel or something? I've been through the manual but it wasn't much help. Sorry this is such a basic question, thanks for all helpful suggestions!

You had everything working properly.
There was no need for her to have Airport Utility on her computer as the Airport Base station was already set up.
Set your system up the way it was and then on her computer, just have her join the network.
Do not use Airport Utility for anything on her computer.

Airport express base station a1264 was working great.

Similar Messages

Maybe you are looking for