Airport express base station as Wireless Access Point?

I purchased the Airport Express base station with the intent of providing wi-fi for my office. There is already a router with the radio turned off serving as a network switch. Can I add the Airport express as a wireless access point?

Sorry, I do not have an iOS device handy to try to figure out what is going wrong. Having tried this in the past though, I have noticed that AirPort Utility for iOS tries to analyze the connection and then configure things automatically.
Unfortunately, it does not always choose the correct settings and then it is necessary to look for a way to manually configure things.
I may be able to use my wife's iPad later today. Please confirm that you are connecting an Ethernet cable from one of the LAN <-> ports on the router or switch to the WAN "O" port on the AirPort Express so that I can set things up exactly the same way here and work on a manual procedure for the configuration.

Similar Messages

Using a Airport Express Base Station for wireless printing.

Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

thanks for the reply, I couldn't connect with the base station. The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established. Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured. Got home and it worked like a charm. Would have never known what he knew. Thank you genius bar. Thank you for taking time to respond.

Can't read airport express base station configuration wirelessly

The setup:
2TB time capsule that takes the ethernet feed from the cable modem for internet access.
Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
The problem:
I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
Any thoughts?

When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
Modem/Router Power Recycling - Quick
- Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
- Power-on the BT Voyager modem; Wait at least 5 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
- Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the BT Voyager modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)

How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

Can the airport express base station be wirelessly connected to the DCL modem?

Alan1111 wrote:
Can the airport express base station be wirelessly connected to the DCL modem?
Alan,
Please provide more information. (Make/model of the modem and airport express, Mac OS version, etc.)
Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
I don't know what a "DCL modem" is. Perhaps you meant "DSL".
Most internet modems are either a "Cable Modem" or a "DSL Modem".
Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
"DSL Modems" are used with AT&T and they are connected to your telephone wires.
Both of these types of modems usually includes a router built-in, some include a wireless router, too.
Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
That would be called a "bridge" in networking terms and while it may be possible, it is not common.
Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
Again, connecting or bridging one router to another router is not a common method.

Airport Express base station, G3 and G4

Is it possible to use the Aiport Express base station to share the internet (DSL with only one ethernet jack) with an iBook G4 (has airport extreme) and a G3 (want to stay wired on this one)? Sorry if this has already been posted.

The Ethernet cable that goes to the Internet needs to have only Internet traffic on it. If it also has local Mac-to-Mac traffic on it, your ISP will not be happy with you.
The way you assure that only Internet traffic is on that Ethernet cable is with the function of a Router/Gateway. Today, you are using the Router function built into the AirPort Express.
You could turn off that function in the AirPort Express and use the AirPort Express as only a Wireless Access Point. That would require you to get some other box (that has at least two Ethernet ports) to do the Router function. I think the cost of doing that would be under US$50.
Local wiring would come off the "new" router -- one cable to G3; one cable to Airport Express (now set up as a wireless access point); two cables for future expansion.
Alternatively, you could get a "gaming adapter" (Ethernet to Wireless) for a Mac (like your G3) running 10.2 or later. I think that solution might cost more, maybe US$75?

AirPort Express Base Station - Use with HP Laser Jet & Time Warner

Have this brand new AirPort Express Base Station that I want to install in place of the Linksys router that is connected to the Time Warner cable base station delivering internet connection so I can connect HP Laser Jet 6/6mp printer via USB on the AirPort Express. Any recommendations or suggestions ?

Thanks
The question is this
If I use the Airport Express Base Station as wireless router for internet service coming in from Time Warner AND plug the HP LaserJet printer USB plug into the AirportExpressBaseStation will I be able to overcome the communication problem I am having when I plug in the HPLP's USB plug directly into the MacBookPro and cannot get use of the printer due to language ( Apple Talk vs Post Script ) problems ? Probably not make any difference since the USB female on the AEBS is just a conductor !
While I have you ! How do Mac people delete backwards like PC people do when they press the delete key and letters delete from left to right ?

Will the AirPort Express Base Station create a wifi connection that will enable me to wirelessly connect to XBOX live on my xbox 360

will the AirPort Express Base Station create a wifi connection that will enable me to wirelessly connect to XBOX live on my xbox 360

Yes, but not in all cases with it provide your with an "Open NAT" condition that some on-line gaming require. However, for most Xbox LIVE access, it should work just fine.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
How do I fix this

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Extend Range of Belkin Wireless Router with Airport Express Base Station

I would like to know if I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express Base Station?
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

DLink Xtreme wireless N cabled to the Time Capsule 1TB - Simultaneous dual-band Wi-Fi. In addition to extending wireless range, would this also allow me to connect cabled devices to the Airport? In essence, increasing the number of cable ports available on the network?
Connect an ethernet cable from one of the LAN <-> ports on the D-Link router to the WAN (circle icon) port on the Time Capsule.
Configure the Time Capsule as a "bridge" to use the exact same wireless network name, exact security and password as the D-Link router and you will in effect, have one large wireless network. Computers will be able to "roam" from one area to another and they will automatically connect to the router with the strongest signal.
The ethernet ports on the Time Capsule would be active and operate exactly the same as the LAN ports on the D-Link. Computers could plug into either router for an ethernet connection.
The toughest challenge in this type of configuration with routers from two different manufacturers is that they typically use different names for security types. If the security settings between the two routers do not match exactly, you won't have one network, you'll have two, each requiring a separate log on.
Check the configuration pages on the D-Link to see what type of security it is configured to use. Hopefully, it is +WPA2 Personal+, since that is the most compatible type of security among devices. Or +WPA/WPA2 Personal+ would work.
If the D-Link does not use this type of security, what is it using now? What are the other WPA associated settings that are available? We need to know this in order to provide you with the correct step by step configuration.
Post back with your questions and findings.

Airtunes with Airport Express Base Station stopped working for no reason

Hello,
I used to play music through AirTunes with no problem. I have an Airport Express Base Station and I'm connected to it with an Airport Extreme Card built-in my iBook G4. When I came home after day at work (with the iBook, which is connected in there to wireless access point but not Apple), Airtunes is not working. Also I can not see my (not closed network) Base Station in Airport Admin Utility, internet connection is still working fine. If I connect to the Base Station by pressing button Other, manually type IP of Base Station I can connect to it and administrate it. Airtunes is allowed there, in iTunes too but it is just not working, I don't know about anything that could has been changed. I think nothing has. AppleTalk is runnig only on Airport card. Thank anyone for any advice. I tried to update firmware in the Base Station today and no software update is available.
I created log /var/log/all.log (.), when I reconnect to the network I can see this there:
May 31 17:37:07 jz-iBook kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown complete
May 31 17:37:02 jz-iBook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[248]: exited abnormally: Hangup
May 31 17:37:02 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:02 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
May 31 17:37:04 jz-iBook lookupd[352]: lookupd (version 369.5) starting - Wed May 31 17:37:04 2006
May 31 17:37:08 jz-iBook kernel[0]: AirPort: Link Active: "www.net23.cz/ziizii" - 0014516f4efd - chan 1
May 31 17:37:08 jz-iBook configd[59]: AppleTalk startup
May 31 17:37:11 jz-iBook launchd: Server 4e3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[352]: exited abnormally: Hangup
May 31 17:37:11 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:11 jz-iBook lookupd[354]: lookupd (version 369.5) starting - Wed May 31 17:37:11 2006
May 31 17:37:14 jz-iBook configd[59]: AppleTalk startup complete
May 31 17:37:26 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
iBook G4 12" Mac OS X (10.4.6)

Please perform a "factory default" reset on your AirPort Express. Note you may need to do this a few times to make sure it "sticks." Once completed successfully, the status light should flash amber NOT green.
This type of reset will reconfigure the Express to its factory settings. That is, it will broadcast an unsecured Wi-Fi network with a network name (aka SSID) of something like: Apple Network NNNNNN
Can your Win7 computer find and connect to this network now? If it can, then do so and the AirPort Utility on the PC should now be able to find the Express.

AirPort Express Base Station with AirTunes, is it worth it?

I am about to buy a MacBook and get a wireless capable printer and I'm wondering if it's worth buying the AirPort Express Base Station with AirTunes. Does it improve internet connectivity? I have a Cable modem will the Mac pick up the connection automatically?
thanks!

Hi liquid_garnet,
welcome to macbook forum.
First check your wirelesss printer that you want to buy, and make sure they have intel mac driver for it in the box or on their sites.
And check your cable modem, see if the modem is capable with wireless networking (usually if the box has antenna, it should be wifi capable), if it does, why bother to buy another wireless access point?
If you really need wireless access point, I suggest you consider a wireless router hub, so you can connect up to 4 computer wired and not to mention the wireless capability too, rather than airport express with iTunes that only can act as wireless access point and cannot act as a hub.
Good Luck.

Airport express base station A1034

hi all
I bought a used airport express base station, the old one, because I love it's style, but I have a problem. I don't know how to setup my internet connection, how to even configure my router.
I tried to install the software, but it gives me a message saying that "the software on your mac is a newer version". well I started the 'AirPort Utility' and found the router, but after one hour waiting to 'retrieve the configuration from the router' I've got an error message that 'cannot retrieve the configuration'!!! Now I don't know what should I do. I started thinking about the 'enabler' software, but I'm not sure it will help.
by the way, I have a DSL connection via the PHONE!! my router is speedtouch. there is a port which I connect a phone like cable to it. and then it connects to the internet. how to do the same thing in the airport express?!?!?! there is a WAN port which says connect to DSL or ... , but my DSL is over the phone not WAN.
any help would be great.
thanks in advance

If you have a speedtouch router then you only need to use the airport base station as a wireless access point and switch.
First off I would reset your base station to factory defaults. see Resetting the AirPort Base Station (Dual Ethernet) or Resetting the AirPort Base Station (Graphite)
Then connect the base station to one of the network ports on your speedtouch router using a cat5 network cable.
Then connect your mac to one of the network ports on the base station. Then run the Airport Utiltiy in your Utilities folder.
Then you can use the assistant.

Problems setting up AirPort Express Base Station

I'm a real newbie at this, so pardon the ignorance in advance haha.
I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
Good luck.

Airport Express Base Station and HP Laserjet 1020 printer connected

Dear all,
I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

Hallo everybody,
Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
Conclusion:
1. The USB cable must be plugged into the airport express before turning on anything.
2. Turn on the printer first.
3. Turn on the airport express and the computer.
4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
5. Disconnect the USB cable from the airport express and connect it to the PC directly.
6. Print a document.
7. Disconnect the cable and reconnect it to the airport express.
8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

1st generation airport express base station not showing up in network utilities

when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with my new mac?

Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.

Airport express base station as Wireless Access Point?

Similar Messages

Maybe you are looking for