AirPort Express Base Station - Use with HP Laser Jet & Time Warner

Have this brand new AirPort Express Base Station that I want to install in place of the Linksys router that is connected to the Time Warner cable base station delivering internet connection so I can connect HP Laser Jet 6/6mp printer via USB on the AirPort Express. Any recommendations or suggestions ?

Thanks
The question is this
If I use the Airport Express Base Station as wireless router for internet service coming in from Time Warner AND plug the HP LaserJet printer USB plug into the AirportExpressBaseStation will I be able to overcome the communication problem I am having when I plug in the HPLP's USB plug directly into the MacBookPro and cannot get use of the printer due to language ( Apple Talk vs Post Script ) problems ? Probably not make any difference since the USB female on the AEBS is just a conductor !
While I have you ! How do Mac people delete backwards like PC people do when they press the delete key and letters delete from left to right ?

Similar Messages

Error -3256 or -15000 when streaming to AirPort Express base stations using

There's an article found concerning this error; itunes directly links to it when the error occurs: http://support.apple.com/kb/TS2278
In the article, the last steps are:
10. Choose the radio button "Set access for specific services and applications."
11. Close the Security window.
What's missing there is to add the itunes application and the airport application to the list shown in step 10. I added both mentioned apps and everything worked fine.
Good luck, folks!

My topic is just a hint how to solve the problem.

I have got a Airport Extreme Basestation and an 3 x Airport Express Base station.

Hi
I have a netgear modem. Would like help with how to create one network with strong wireless signal all around the house and the gym outside. I basically know how I will setup the Airport Extreme and One Express ( for streaming music from Itunes ). How to use the other two Expresses to extend the wireless side of the network to have a strong signal all around the residental area.
Please help

Not knowing your exact building floorplan, I would start with the following basic setup of your AirPorts:
Connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Netgear router by Ethernet.
Reconfigure the AEBSn as a bridge.
Configure the AEBSn for the option "Allow this network to be extended" enabled.
Configure each of the 802.11n AirPort Express Base Stations (AXn) with the option "Wireless Mode = Extend a wireless network" enabled.
Both AXns will be connected back to the AEBSn by wireless.

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
(66017)

Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

Hi
Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
Thanks in advance

The first generation Time Capsule was not a simultaneous dual band device.
If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

I have an old airport express base station from 2005
I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
Can i update the firmware? has it become useless because too old or what can i do?
I work on macbook pro with macOSX 10.9.4
Can someone give me some tips please
thanks
J

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

Airtunes with Airport Express Base Station stopped working for no reason

Hello,
I used to play music through AirTunes with no problem. I have an Airport Express Base Station and I'm connected to it with an Airport Extreme Card built-in my iBook G4. When I came home after day at work (with the iBook, which is connected in there to wireless access point but not Apple), Airtunes is not working. Also I can not see my (not closed network) Base Station in Airport Admin Utility, internet connection is still working fine. If I connect to the Base Station by pressing button Other, manually type IP of Base Station I can connect to it and administrate it. Airtunes is allowed there, in iTunes too but it is just not working, I don't know about anything that could has been changed. I think nothing has. AppleTalk is runnig only on Airport card. Thank anyone for any advice. I tried to update firmware in the Base Station today and no software update is available.
I created log /var/log/all.log (.), when I reconnect to the network I can see this there:
May 31 17:37:07 jz-iBook kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown
May 31 17:37:02 jz-iBook configd[59]: AppleTalk shutdown complete
May 31 17:37:02 jz-iBook launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[248]: exited abnormally: Hangup
May 31 17:37:02 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:02 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
May 31 17:37:04 jz-iBook lookupd[352]: lookupd (version 369.5) starting - Wed May 31 17:37:04 2006
May 31 17:37:08 jz-iBook kernel[0]: AirPort: Link Active: "www.net23.cz/ziizii" - 0014516f4efd - chan 1
May 31 17:37:08 jz-iBook configd[59]: AppleTalk startup
May 31 17:37:11 jz-iBook launchd: Server 4e3f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[352]: exited abnormally: Hangup
May 31 17:37:11 jz-iBook configd[59]: posting notification com.apple.system.config.network_change
May 31 17:37:11 jz-iBook lookupd[354]: lookupd (version 369.5) starting - Wed May 31 17:37:11 2006
May 31 17:37:14 jz-iBook configd[59]: AppleTalk startup complete
May 31 17:37:26 jz-iBook configd[59]: hostname (multicast DNS) = jz-iBook
iBook G4 12" Mac OS X (10.4.6)

Please perform a "factory default" reset on your AirPort Express. Note you may need to do this a few times to make sure it "sticks." Once completed successfully, the status light should flash amber NOT green.
This type of reset will reconfigure the Express to its factory settings. That is, it will broadcast an unsecured Wi-Fi network with a network name (aka SSID) of something like: Apple Network NNNNNN
Can your Win7 computer find and connect to this network now? If it can, then do so and the AirPort Utility on the PC should now be able to find the Express.

Can I use an Airport Express Base Station to extend non-Apple router range?

We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.

It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way.

Extend Range of Belkin Wireless Router with Airport Express Base Station

I would like to know if I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express Base Station?
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

DLink Xtreme wireless N cabled to the Time Capsule 1TB - Simultaneous dual-band Wi-Fi. In addition to extending wireless range, would this also allow me to connect cabled devices to the Airport? In essence, increasing the number of cable ports available on the network?
Connect an ethernet cable from one of the LAN <-> ports on the D-Link router to the WAN (circle icon) port on the Time Capsule.
Configure the Time Capsule as a "bridge" to use the exact same wireless network name, exact security and password as the D-Link router and you will in effect, have one large wireless network. Computers will be able to "roam" from one area to another and they will automatically connect to the router with the strongest signal.
The ethernet ports on the Time Capsule would be active and operate exactly the same as the LAN ports on the D-Link. Computers could plug into either router for an ethernet connection.
The toughest challenge in this type of configuration with routers from two different manufacturers is that they typically use different names for security types. If the security settings between the two routers do not match exactly, you won't have one network, you'll have two, each requiring a separate log on.
Check the configuration pages on the D-Link to see what type of security it is configured to use. Hopefully, it is +WPA2 Personal+, since that is the most compatible type of security among devices. Or +WPA/WPA2 Personal+ would work.
If the D-Link does not use this type of security, what is it using now? What are the other WPA associated settings that are available? We need to know this in order to provide you with the correct step by step configuration.
Post back with your questions and findings.

Using a Airport Express Base Station for wireless printing.

Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

thanks for the reply, I couldn't connect with the base station. The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established. Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured. Got home and it worked like a charm. Would have never known what he knew. Thank you genius bar. Thank you for taking time to respond.

Anybody use an Apple AirPort Express Base Station (windows)

http://store.apple.com/uk/product/MB...mco=MTIxODk3Mw
Im thinking about getting one of these and just wanting people opinions on it working with windows.
Just im a little confused, can i use it as a wireless router insted of my net gear, or will i still have to use my net gear router. My internet comes from the telephone wire if that helps?
Many thanks James

Hello jshrubb. Welcome to the Apple Discussions!
Since you didn't include the model of your Netgear router, it will be a little hard to determine if the AirPort Express Base Station (AX) could replace all of its functions.
So, here's what the AirPort Express is, and is not to help you decide:
o The AX is an Internet wireless router.
o The AX does not have a built-in modem: DSL, ADSL, Satellite or cable ... so one of these will still be required.
o The AX does not have a built-in Ethernet switch. It does have an Ethernet port, but that ports primary function is to be connected to the modem. However, it could be used to connect a wired client, but only if the AX is reconfigured as either a remote or relay base station in a Wireless Distribution System (WDS). The bottom-line here is that if you need to support wired clients, the AX would not be the appropriate choice for your network.
o The AX does support iTunes audio streaming so that when connected to either a pair of powered speakers or an audio system, you can stream iTunes to speakers wirelessly.

Cannot configure and connect to Airport Express Base Station Model A1264 with Windows 7 (x64)

I am not able to connect Airport Express Base Station Model A1264 with Windows 7 (x64). I did a factory reset, uninstalled and reinstalled the AirPort Utility for Windows v. 5.6.1.
My objective is to extend a non-Apple WiFi network with Airport Express Base Station Model A1264 and use it for direct ethernet and/ or wireless connection. Any guidance as to how I can get set up here?

This is very common, we run a mix of mac and various pc brand desktops and laptops, what I have found is that using the windows wireless client rather than manufacturers on some laptops helps, getting the latest wireless drivers from the manufacturer has helped, make sure all your windows updates XP and Vista are current.
If all the above is covered try the different WEP WPA WPA2 variants or even without for test purposes. I have most success with WPA2.
Finally I am assuming your running the latest firmware on the express unit, whilst this hasn't attributed to better connectivity for us I did it regardless.
Message was edited by: Fence Rider

Using an Airport express base station as a bridge

Hello,
Sorry if the question has already been asked, but I'm getting nuts...
I have today a XP PC connected to the internet over WiFi (modem + router).
The problem is that router & PC are far one from the other in my house, and I bought this AirPort Express to extend the range of the existing network.
Could someone explain to me how to access to the configuration menu of the Airport to "tell him" that I want to use it as a bridge ?
I think I've done what's requested, but cannot access to any menu (although my PC is connected to the airport WLAN network).
Thanks in advance

I bought this AirPort Express to extend the range of the existing network.
Could someone explain to me how to access to the configuration menu of the Airport to "tell him" that I want to use it as a bridge ?
Unless your current router is an AirPort, you will find few non-AirPort routers that will work in a Wireless Distribution System (WDS). If your primary base station is an AirPort (Extreme or Express), let me know, and I will provide WDS setup instructions.
You would access the AirPort Express Base Station (AX) setup using either the AirPort Setup Assistant or the AirPort Admin Utility. Both of these come, either on the CD supplied with the AX, or can be downloaded directly from Apple. There is also a Windows version of the AirPort software at the Apple site. (ref: http://www.apple.com/support/downloads/airport42forwindows.html)

AirPort Express Base Station - Use with HP Laser Jet & Time Warner

Similar Messages

Maybe you are looking for