Airport Express Base STILL not recognized

This is a reposted subject. I spent 3 hrs. today waiting @ the Apple Store
to get my AE base station replaced. It was plugged in and everything
checked out ok on the station.
Now I'm home and finding the base station to be working..steady green light
as opposed to the blinking amber light on the replaced AE base station.
But on my laptop I'm still not picking up a signal at all. Went outside to see
if I can get wireless network but nothing was found.
My airport card is recognized in "About this Mac" in the hardware section
and I even checked to see if the antenna was still connected properly and noticed it wasn't seated..pressed it in and thought it would be solved... I still
have no signal.
I read about downloading firmware 6.1.1 but I can't install it as my wireless network can't be found.
I'm at a complete loss as to trouble shoot this any further.
Am I guessing my airport card is shot?
much feedback needed until I get back to Apple tomorrow.. "A"

Ok here's the update on this now "mysterious" wireless issue between my
PowerBook G4 & AE base station.
I spent some trouble shooting time with a product specialist(s) a few times
this week. And what is happening is the airport card is in working order..whew!
I drove around with my laptop the other day, and was able to pick up wireless networks as I drove into different areas.
There is also a wireness network right out side of my place (over 100 ft. outside my door) but the signal doesn't extend much firther once I walk in
pass my entry.
When talking with the product specialist we've tried plugging the ethernet cable into my Pwr.book and into the AE base station. Supposedly it's
to read & highlight my own network that comes with the base station (ie Apple Network d456jk, etcc..). Which it does but it doesn't allow me to get
online wirelessly. We tried different channel settings, moved the station around, you name it. I even went into 2 of my neighbors homes (1 next door
& the other upstairs and across the way) configure the station in the same way, ethernet out from laptop into AE base station .. my network is highlighted in the Airport Admin Utility but the same error occurs..cannot locate my Apple e389..network!!!
I'm so frustrated at this poin and wonder how i was able to get a signal and
now Apple's only reasoning is that I have some kind of interference that is
not allowing me to get a wireless AE base signal (which reads steady green)
to my laptop.
Can it be software?? It can't be as I'm able to get to outside networks..
At this point I'm the owner of a base station and no longer receive wireless
signals to my laptop in my home.
Where does one go from here as the product specialist(s) say that have never
encountered anything like this.. I bet they haven't! rrrgh.
"A"

Similar Messages

AirPort Express Base Station not recognized by Verizon MiFi 4G

I use an AirPort Express Base Station (AX) to connect wirelessly to my PC in order to play music from iTunes. The AX is connected via wire to a sound system. I have just changed from a Verizon MiFi 3G wi-fi hot spot to a Verizon MiFi 4G wi-fi hot spot. I was able to use the AX on the Verizon MiFi 3G wi-fi hot spot with no problem. But when I switched to the Verizon MiFi 4G wi-fi hot spot, I could not get the AX to work. I used the AirPort Utility to update the AX settings, including changing from WPA to WPA2, and the AirPort Utility reported everything OK (green check mark at end of session), but the Verizon MiFi 4G wi-fi hotspot does not recognize the AX--the indicator light on the AX is blinking orange, not solid green.
Does anyone have any idea why the AX worked with the Verizon MiFi 3G hotspot but not with the Verizon MiFi 4G hotspot?
Is there some kind of workaround or another box to put in the system?
Thanks.
CFTC

It say's this on the main Apple Website:
Support for WPA requires Mac OS X v10.3 or later. Use of Wi-Fi Protected Access (WPA) reduces the maximum number of network users. When joining an existing wireless network, AirPort Express supports only WPA-Personal. WPA2 requires a Mac computer with an AirPort Extreme Card and Mac OS X v10.3 or later.
So it has to be on WPA-Personal.
The Airport Utility should tell you what is wrong with it when it is orange.
Also, is it running on the same channel? For instance, are they both running on channel 1? Are you extending a network, or creating a network?
Hope that brain snap just puts everything together.

1st generation airport express base station not showing up in network utilities

when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with my new mac?

Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.

Airport Express works but not recognized by Airport Utility

This is a multi-part issue.
My airport express is online, recognized by by network manager but is not seen by the Airport Utility. I am running the latest firm ware upgrade and Airport utility for windows versions
The network is working. My laptops working on wireless connect to my network. However, my IPOD touch will not connect to the network even though I get a strong signal and the touch indicates it is connected to the network.

It happened to me today. I noticed that if you change the name of the Airport Express and also some other information in other tabs, like the wireless info, and then you save (the AE restarts) then it is ot available.
To solve the issue that I could not see it anymore, I connected to the AE with a LAN ethernet cable, then executed the set ups one tab at the time, saving (restarting) in between.
It works
GG

Airport Extreme base station not recognized anymore by Airport Utility software

Hello,
I just encountered the problem today.
I have old Airport Extreme base sation (mushroom design).Picture below.
I have iMac 24". About this Mac Picture below.
Obviously, Airport Utility has been updated recently and today my network is not valid anymore, as well as the mushroom is not managed by Aiport Utility softwrare anymore. The only way to get WiFi now is using my computer as an antenna via the sharing of internet trough its WiFi card: not satisfactory.
The message of the software led directly to this support community.
The picture with the base station icon says: "this version of Airport Utility does not support this base station. To know more, check the Sevice and Support Community."
I did reset the base station may times, without success. I can't rename the base sattion, i can't create rename my network, i can't set up password access, i can't use WiFi other than the default Airport Extreme network.
Since this is not my field of knowledge, would anyone come up with a brilliant solution other than .... :
"Did Apple just manage to make you buy a new Airport base station ?."
Thank you for your time.

Hello,
Thank you for your reply and exlpanation.
I just downloaded the Aiport Utility 5.6.1 from Apple site. Unfortunately the OS X version is not compatible with this Airport Utility.
I don't have Time Machine neither.
Below is the message I got:
"Airport Utility cannot be installed on this hard drive. The Mac OS X version on this drive is not supported"
Is there something inbetween: a correction to Airport Utility 6.2 plug in that would accept my base station and compatible with my iMac ?.
Thank you for your attention.

Help! Airport Express for PC not recognized

I'm trying to connect a PC to airport express to use augioengine 5A speakers via wireless.
I've installed the airport software on the PC, plugged in the airport to the wall outlet, and opened AirPort Utility, but the screen is stuck on scanning. It can't find the airport device and when I click rescan, it still won't find it.
How do I get this to work? I would like to connect the airport to the existing network on the PC computer.
Suggestions are welcome.

When the airpoirt is plugged into the wall it is flashing amber.

Airport express and extreme not recognizing each other

i have an existing airport extreme wireless working.
dsl modem to airport extreme hardwired to mac g4 (with 200 gigs of music) streaming to new dell laptop from work.
just purchased airport express to stream music to home stereo via laptop utilizing the media from the desktop mac.
but i cannot get the 2 airports to see each other. the airport express keeps blinking amber. the manual says to open airport assisstant to add express to existing network but i have no such option listed.
i know there must be an easy solution but for the life of me i cannot figure out what it is.
any suggestions?
thanks,
gord
power mac g4 dual 450, 1 gig ram Mac OS X (10.4.7)

Try the following:
- Perform a "factory default" reset of the AX. (ref: http://docs.info.apple.com/article.html?artnum=108044_
- To facilitate setting up the remote/relay base stations, place them in near proximity of each other during the set up phase.
- Then perform the WDS setup as follows:
Set up the AirPort Extreme Base Station (AEBS) as the WDS Main Base Station, by connecting directly, using an Ethernet cable, to the LAN port of the AEBS, and then use the AirPort Admin Utility, located in /Applications/Utilities, to make the following settings.
WDS Tab
- Enable this base station as a WDS: main base station (checked)
- Enable wireless clients on this base station (optional)
- Click "+" to add Remote/Relay Base Stations.
-- Select the Base Station that you want to be the WDS Remote/Relay.
-- AirPort ID: <verify that this is the correct wireless MAC address for the Base Station you are adding as a Remote/Relay.
-- Auto configure as a WDS remote base station (checked)
-- Click "OK."
- Verify that the Remote/Relay Base Station has been added to the list.
- Click "Update," and then verify the settings for the Remote/Relay.
-- Allow wireless clients on this base station (checked)
-- New network name: <verify that this is the same as the network name for the AEBS>
-- TCP/IP: Configure using DHCP
-- Base Station Password: <the Remote/Relay Base Station password>
-- Confirm: <same as previous step>
-- Click "OK."

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

I want to set up my Airport Express Base Station again but do not remember how. Please walk me thru it.

I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.

All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
Open the airport utility which you find under applications/utilties.
Router setting will depend on what version of the utility you are using.
In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
https://discussions.apple.com/community/wireless/airport
Manuals link http://support.apple.com/manuals/%23airport
If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
What modem do you have?
I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
How exactly is the airport setup now?
How do you connect to the modem?
How is the printer connected? What kind of printer?

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

Airport Utility not seeing Airport Express base station

Since I got access to cable internet a few days ago, I've been using my Airport Express base station with no problems on my MacBook. Today I tried to set up my roommate's PC (she has Vista, if that matters) so she can get online. So we downloaded the AE Utility for Windows, then reset both the modem and the AE base about two times, but her computer won't see the Express base at all when it scans.
Any ideas? Do we need to go into her Network preferences on the Control Panel or something? I've been through the manual but it wasn't much help. Sorry this is such a basic question, thanks for all helpful suggestions!

You had everything working properly.
There was no need for her to have Airport Utility on her computer as the Airport Base station was already set up.
Set your system up the way it was and then on her computer, just have her join the network.
Do not use Airport Utility for anything on her computer.

Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

Hi
Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
Thanks in advance

The first generation Time Capsule was not a simultaneous dual band device.
If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

Airport Express Base Station no longer detectable by my computer

Ever since I went wireless last year, I have had a love-hate relationship with my Airport Express Base Station. It seems to take forever and a day to configure the sucker, then, somehow I do and it works well for several months - until something happens to muck up the works. That thing seems to have happened this morning when Earthlink's DSL connection got wonky (it was a glitch that apparently covered a large part of the country). That glitch apparently worked itself out, but after I put my MacBook to sleep in order to get lunch, suddenly my PPPoE host went missing when I woke the machine up. Further examination indicated that, although my wireless network was still there, the MacBook could no longer find my Base Station, even though the light was still working. Resetting the Base Station does not help. I am at my wit's end here. I can work via Ethernet DSL line, but I have become used to wireless, and without a viable network, my Mac mini can't connect to the Internet. Help!

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Airport Express Base STILL not recognized

Similar Messages

Maybe you are looking for