AirPort Express compatiblity with Zoom ADSL X6

I am running my home network from a Zoom ADSL X6.
It's running as a DSL Modem, Router and Wireless Router.
How do I get an AirPort Express to run off of this Wireless Router?

Amaury Vargas wrote:
when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems.
First that Cisco DPC3000 is a cable modem, not a ADSL modem. You probably don't need the DSL configuration that you had before.
when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
How did you "reset" the AE? How is it configured now? You probably need a setting of "Connect Using:" "Ethernet", rather than the "PPPoE" setting you may have had before.
If everything else looks good, it's common to have to reset a modem when switching what device is connected to it. Try powering down the modem for a few minutes. If it has a reset switch, press that.

Similar Messages

  • Is Airport Express compatible with ADSL2 modem?

    I already have an ADSL2 Modem (with both ethernet and usb cables) which was provided by the ISP. I am looking out for a router since my current Linksys router is giving problems. I am thinking of purchasing the Airport Express since it gives me the option of using my printer and ipod wirelessly as well.
    I just wanted to clarify if the modem will be compatible with the Airport Express. Also, if the Airport Express can be used as a proper wireless router for accessing the internet wirelessly through my MacBook Air.
    Can anyone help please!
    Thanks.

    Thanks. I checked on my modem setup page and PPP over Ethernet ( PPPoE ) is selected. Does the AirPort Express work with this? Also, how is the connectivity? What is the difference between G & N. Previously I had a Linksys Wireless G router. The Airport Express seems to be N router? Will that create any problems. I just want to clarify before I buy it.
    Thanks a lot for answering.

  • Airport Express worked with previous ADSL modem, not working with new one

    hello all.
    maybe the majority of you people won't be able to help me, since i am in Brazil.
    this is the story:
    for the last 4 years i was a subscriber of the Speedy ADSL provider (in conjunction with the Terra content provider). the Sppedy service is part of the Telefonica telephone company and uses the regular telephone infrastructure to provide the ADSL signal thru telephone lines.
    approximately 2 years ago i bought an Airport Express and set it up with the ADSL modem that Speedy provided to me. configuration was a breeze and it worked flawlessly since then.
    as of last thursday (april 7th) i became a subscriber of the Ajato ADSL provider. the Ajato company is part of the TVA (cable tv) company and uses the TVA cable tv infrastructure to provide the ADSL signal.
    the problem is: when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems. but when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
    i know you guys don't have Ajato there, of course. but i suppose some of you might have faced similar problems in similar cable ADSL environments.
    this said, any kind of help or hint is greatly appreciated.
    Message was edited by: Amaury Vargas: typos

    Amaury Vargas wrote:
    when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems.
    First that Cisco DPC3000 is a cable modem, not a ADSL modem. You probably don't need the DSL configuration that you had before.
    when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
    How did you "reset" the AE? How is it configured now? You probably need a setting of "Connect Using:" "Ethernet", rather than the "PPPoE" setting you may have had before.
    If everything else looks good, it's common to have to reset a modem when switching what device is connected to it. Try powering down the modem for a few minutes. If it has a reset switch, press that.

  • Is the Airport Express compatible with a computer with 802.11ac

    Thinking of buying a Toshiba Model: P75-A7100 which apparently has Wireless-AC.  Can I use the airport express with this?  If not, will the Airport extreme $199 let me play music wirelessly?

    You can use express with AC wireless.. All AC wireless is backwards compatible to N wireless routers.
    If not, will the Airport extreme $199 let me play music wirelessly?
    You cannot play directly from extreme to speakers.. so there is no audio output from an extreme.. but some amps now are ethernet or even wireless connected to the network.. so it is hard to say no or yes. It all depends on what you are intending to plug it into.

  • Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

    I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

    In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
    I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
    http://itunes.apple.com/us/app/airport-utility/id427276530
    if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express,  you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
    If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad.  Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
    http://support.apple.com/kb/HT4356
    I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Does airport express work with garage band in lion?

    Actually I know it can work and there are apps out there to make it work but I heard a rumor that Apple was going to allow functionaliy between the two in Lion. So my question is... 
    Will Airport Express work with Garage Band in Lion or do I have to buy third party software?

    I believe the HP 2840 can be connected either via Ethernet or USB. If connected to the AirPort Express Base Station (AX) by USB, only the basic printing functions will be shared out; the scanning, faxing, copying features are not supported.
    If the AX is configured so that its Ethernet port is enabled, the it may be possible to gain all of the printer's features by connecting it to the AX by Ethernet. In this case, the printer will use its own Print server to share out all of these features.

  • Airport Exreme - Airport Express droupout with multiple Airport Express sta

    I have multiple airport express's, an iMAc, a Airport extreme router, all software/firmware to current release. If I play on the iMac and one set of remote speakers, no problems, once I add two airport express stations with iTunes, I get the dropouts. Any ideas. I have already got rid of wds, changd channels, tc. to no avail.

    I have the same set up and had the same issue and a guy at apple support gave me a tip to try and it worked!. First remove all the expresses from the power outlets keeping your airport extreme running. I also recommend using a different channel say 11. and use ap grapher
    http://www.chimoosoft.com/products/apgrapher/
    to see if your network looks like it's running well after you resetup your everything or before you bother doing this. I found my audio gear was really messing with my airports bandwidth and when I moved it to a new spot ap grapher showed I was getting a nice steady 54mbit/sec.
    So again unplug the expresses and keep the extreme up and running.
    You must first do a reset on the airport express by pushing in the little white button on the bottom with a paper clip for a few seconds, but you should check out how to reset the airport express via apple's web site because there are 2 types of resets one with it plugged in and one with it not. Not sure which is right reset method so check that yourself.
    Once you have reset it you want to set the first express to extend your preexisting airport extreme network using the airport setup utility. If you have two expresses you may only need to do this to the last one in the chain but it can't hurt to reset them all form scratch.
    Once the first express is up and running you then unplug the airport extreme from it's power outlet. Then you go to set up the 2nd express after you reset it and here lies the trick. You extend the 2nd express off the first express without the extreme involved. Then you plug in the extreme back into the power and bingo you have tricked the express #2 to extend from the first express and they wind up with new ip numbers like 10.0.1 and 10.0.2. Instead of them competing for signal using the same ip address they now have their own individual ip address, it turns it into an extension chain. If that makes sense I don't know what the tech terms are for this but it did cure my issues of dropouts I thought it was odd that they had the same addresses so it makes sense that they should have their own.
    Micro wave ovens cause drop outs and so do some wireless phones but you can always check on your signal using AP grapher. I found that when I walk around with my MacBookPro in my house that the expresses really don;t have much of a range so if they are really far apart that could also be an issue. I'm sure the N versions are much better and I am thinking about upgrading.
    Hope this helps cause it sure took a long time to type:)

  • HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

    Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
    http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

  • Does The Airport Express Work with Any Router?

    Hi Forum,
    i have an old Linksys router G Wifi speeds, does the Airport Express work with this?

    The AirPort Express or other Apple routers will not wirelessly extend the signal from your Linksys router, if that is what you are asking here.
    If yes, use another Linksys product to insure compatibility between devices.

  • Is HDR express compatible with Elements 9 ?

    Is HDR Express compatible with Elements 9?   What is a relatively easy Hdr program to use with elements 9?
    Thanks in advance for any help

    Elements doesn't support true HDR because the program is not able to. I use picturenaut which is a freebie. I convert my 3 exposures in elements from RAW to TIFF in a special folder. I open the 3 photos in Picturenaut which merges my photos in true HDR. Tonemapping can be done in Picturenaut or Elements I do this in quick edit. Good luck Chuck

  • Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone.

    Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone. It still recognizes the printer on the iBook (bonjour), but not on my Windows notebook (work). The only device that still connects via wireless is the PlayStation 3.

    The latest firmupdate solved the issue.

  • Airport express connect with Imac via lan line or can not?

    I using IMac with connect to internet with DSL modem router (having 4 lan ports).
    Now I put Airport express connect with one of Lan ports from DSL router and still connect my IMac with DSL router via lan line and still connect to internet via lan line (switch off airport function in Imac).
    The Airport express is using for provide wireless internet and printer to my other PC.
    My Question is can I still set up as above and connect share file to my PC via airport express?
    Forget to tell that I'm very newby to mac.

    chounws, Welcome to the discussion area!
    Yes you can do that. Configure the AirPort Express (AX) to operate in bridge mode (not sharing a single IP address).

  • No Internet with Airport Express - Internet with ethernet

    I have achieved frustration.
    I have searched and searched the forums for the answer to this, and all I find is "reset the modem"
    iMac
    OSX 10.6.1
    Airport Extreme
    Airport Utility on iMac
    Arescom Netdsl 800 modem
    Qwest ISP
    I can connect to the Airport Express, seamlessly with the Airport Utility.
    However, I do not have Internet.
    If I take the ethernet cable out of the Airport Express and plug it directly into the iMac, I have lightning fast Internet.
    Can anyone help me out? Can anyone point me in a direction?
    Thanks,

    I don't see anything unusual with the modem information that would prevent a normal installation.
    Try a factory reset on the AirPort Extreme (AEBS) as follows:
    Pull the power for a few minutes
    Hold in the reset button and keep holding it in as you plug the AEBS back in to power
    Release the reset button after approximately 8-10 seconds
    Connect the ethernet cable from the modem to the WAN (circle icon) port on the AEBS and use AirPort Utility to reconfigure the device. The main settings that you will choose are Connect Using "Ethernet" and Connection Sharing would be "Share a public IP address"
    It's possible that you may get a Double NAT error notice. You can click to ignore this warning.
    See if that might help.

  • Does airport express work with PC

    Does airport express work with a dell laptop?
    Can one setup an airport express for the very first time using a dell laptop?

    Yes on both. FWIW, I currently have a Dell laptop that has no issues connecting to my AirPort network. I also have AirPort Utility for Windows installed on this laptop when I need to administer the base station. In my case the laptop is running Windows 7.

Maybe you are looking for