Airport express con vodafone station

salve. Ho un problema con la mia vodafone station e il mio nuovo mac... Viaggiando il mac in wifi 802.1.1n la vodafone station non sempre riesce a mantenere il contatto essendo di modello obsoleto e viaggiando ancora in g.
Cosi mi è stato consigliato di mettere un airport express in modo che il segnale g della vodafone station si converta in n così da essere captato dal mac.
Volevo sapere se, avendo altri pc con solo tecnologia g, qualora fossi collegato con tutti e due il segnale mandato dall airport tornerebbe in g? E se dopo smettessi di utilizzare pc e usassi solo di nuovo mac il segnale tornerebbe automaticamente in n?
grazie a tutti

Can I use the Express as a relay station or can only Extremes be used as such?
Yes, the AirPort Express Base Stations can be configured as a relay base station in a WDS.
If so, are there certain models that can or can't? (My Express is a couple of years old)
Both the original 802.11b/g version and the new 802.11n version of the AirPort Express Base Station support configuration as either a main, relay, or remote base station in a WDS.
Can an Express be a relay station and at the same time be connected to my sound system?
Yes.

Similar Messages

802.11n and Airport Express iTunes Base station Help me ?

I'll try to keep this simple :
In my Office I have a 24" iMac Intel and the
802.11n resides also in my Office
About 40ft away is my Den which resides:
My MacBook Pro 17" Intel and a Airport Express iTunes
Base Station
Going Back to the 802.11n I have a 2.0 USB AC Powered
Hub connected to the USB port on the back of the 802.11n
of which  said is OK to do
Connected to the USB on the back of the 802.11n:
is a Epson R200 USB InkJet Printer and also on that
Hub is a Lacie Porche 500gb External USB Hard Drive
Again  says is Ok to do
The problem I'm having is that the Cable Modem is
in my Office and is connected via Ethernet to the 802.11n
and I can get a strong connection to the internet
on my iMac 24" Intel in my Office but the MBP 17"
in my Den is having issues getting onto the Internet
now about a week ago I spent 8hrs on the phone W/Apple
about such issues so we erased all the information in
the Disk Utility and started over with the information
in the 802.11n and the iTunes Base Station Express
this has helped until the recent FirmWare Update that
Apple Released a few days ago,
I've tried to actual bring my MBP 17" into the Office
and it gets a better Internet signal than in the Den,
but this wasn't the way it was before the FirmWare Update
Any Suggestions on what I can do to fix this situation
As all worked well with the Express iTunes in the Den
and the 802.11n in the Office and the Cable Modem has
always been in the Office ?
P.S> One problem I forgot to mention is I keep dropping
The Macbook Pro 17" and a Lacie 400gb Hard Drive which is
connected directly to the MBP 17" USB Port which keeps
dropping from my iMac 24" networking it will be working
fine and then I get a message stating that either or both
the MBP 17" and the Lacie Disk (400gb) is Disconnecting
from iMac 24" and then the same will happen on the
MBP 17" with the iMac 24" and any connected drives I'm
sharing from the iMac 24" ?
I'm having a connection problem and I can't get to the
bottom of it and I need some help please
Feel free to email me [email protected]

Updates fixed issue closed question

AirPort Express chiamato "Base Station 6024b9" non può essere configurato dal software

AIUTO/HELP ME
la Base AirPortExpress è di qualche anno fa (2005 o 2006)...
l'istallazione\Impostazione AirPort sul mio nuovo iPad mini mi segnala:
AirPort Express chiamato "Base station 6024b9" non può essere configurato dal software.
Vai all'indirizzo apple.com/it/support/airport
l'ho fatto ma non sono riuscito a risolvere! :-(
l'Utility AirPort non riesce a rilevare nessuna base AirPort!
che fare?

AirPort Express as Relay Station?

I have read the article at http://docs.info.apple.com/article.html?artnum=107454, but I am still a little confused.
- Can I use the Express as a relay station or can only Extremes be used as such?
- If so, are there certain models that can or can't? (My Express is a couple of years old)
- Can an Express be a relay station and at the same time be connected to my sound system? (to play from iTunes)

Can I use the Express as a relay station or can only Extremes be used as such?
Yes, the AirPort Express Base Stations can be configured as a relay base station in a WDS.
If so, are there certain models that can or can't? (My Express is a couple of years old)
Both the original 802.11b/g version and the new 802.11n version of the AirPort Express Base Station support configuration as either a main, relay, or remote base station in a WDS.
Can an Express be a relay station and at the same time be connected to my sound system?
Yes.

Printing with Airport Express as Base Station

That is, I think our Airport Express is our base station. It's the only thing we have, and we can connect to the internet just fine, but it doesn't show up in the Airport Utility.
The main problem is printing through the Airport Express. Our printer prints fine when plugged into the USB on the ibook but it won't print from the USB on the Airport Express.
We can see the printer located on our wireless network but when we try to print the print center says that printing has stopped with an error of level one, or category one or something. I do see the appropriate printer driver on the list when I add the printer (I think it's an Epson C40ux, but I'm doing this from memory) and that's set correctly. I've got the unofficial list of printers that work and don't work and I see that some printers may need other drivers to work from the wireless network. There must be other things to check, but I'm a little new at this. It seems like this would be a common problem but I'm not seeing many posts like this so if anyone has a moment and any ideas I'd be grateful. Thanks. Mark
Ibook Mac OS X (10.4.2) Airport Express

Thanks... I will try that first. I've also been advised to delete the network and add a new one with the printer connected... but your idea is simpler.
M

Dedicating an Airport Express Remote Base Station to a BB Curve

Hello all,
Please forgive me if this has been answered in another thread. I have been searching for the last week or so and have found that many people are experiencing the same frustration with the BB Curve and H@H (UMA) service. Someone recently suggested that I dedicate the Remote Base Station to my BB Curve so as to grant the UMA a fighting chance (my network consists of one Main and one Remote base station). In other words, the problem, as I understand it, is that UMA/voice data gets kicked off the network in favor of true data. If I can dedicate my extra (remote base station) airport express to my Blackberry, then the UMA should work more reliably.
Sooo...here is my question:
How do I assign my remote base station (set-up through WDS) to serve only my Blackberry Curve? Should I not do this? How do I find my Curve's MAC and IP address? Which address do I need? So on and so forth...
Thank you all who help.
james

No one seems to know what's going on! I'll retract it, then. Thank you for your consideration.

Airport Express extending Base Station network very slow.

Hi,
I have an Airport Extreme Base Station and an Express, both of which are 802.11N. Currently I have my express connected and extending the network hosted by the Base Station but when I am in a location where I use the Airport Express rather than the Base Station it is extremely slow. If I am on a call on Skype for example the calls drop constantly or I have latencies over 2000 if I am playing a game. But Once I am in range of the Base Station my wi-fi is great. Anybody have any ideas as to why?

What are the steps to extend the network using the Airport Exprss with a Linksys router? I have the Airport Express working with my network (a Linksys WRT54G) but have never attempted to use it to extend the network; instead, it just works for Airtunes currently.
In addition, I can't seem to get Airport Express Assistant to work on my Macbook Pro. It says there's an error when it tries to connect to my Airport card, which is odd, since it works fine.
Any ideas?
Macbook Pro Mac OS X (10.4.7)

Airport Express - Extreme Base Station - MacBook Connection PLEASE HELP!

Ok, i thought i had a pretty good idea of what i was doing with my mac stuff but apparently not, can someone talk me through how to set up the following - i've google and searched forums far and wide and cannot seem to find a simple walk through guide, even read the manual. The Airport Express manual online still says you can only stream to one device at a time.
I have an Airport Extreme Base Station broadcasting a DSL connection from a router - works a treat. I also have 1TB WD Hard Drive plugged into the Base Station which works as a shared AirDisk - also works a treat. I have two stereos at each end of the house and got my hands on two Airport Express devices (Models: A1084 and A1088).
I've gone through every possible scenario in setting these up to join the network but once they're 'joined' there no sign of them, and they no longer show up in my Airport Utility so can no longer configure them, thus having to reset them and start again.
I've tried a) setting up a WDS network, the base station as the main and the express' units as remote. No show in iTunes and no real show of being on the network at all; and b) tried leaving the existing network as is and joining the express' to that, again, they supposedly 'join' (i assume, only because they no longer show up as their own network) but do not show up in iTunes. As far as I've tested and found, I have the latest of all versions of software / firmware available, including Leopard, iTunes and Airport Utility... HELP! It's driving me MAD! And a thousand thank you's in advance...

Thanks for your help, after trouble shooting to no end, I've discovered it has something to do with the WEP password I was using and after reading through many a support article I found this article: http://support.apple.com/kb/TS2098?viewlocale=en_US - however, the $ sign doesn't seem to work to when setting up the Express' (even tried making the password the very one used in that article) and when I set the network up initially, it seemed my flatmates PC's only joined the network if I used a WEP password, rather than a WPA that i'd rather use.
Any suggestions here? Do I have to use a WEP password to let Windows join?

HT5022 i cannot install airport utility 5.6 onto my computer although i need it to configure an older airport express and base station

i cannot install airport utility 5.6 onto my computer although i need it to configure an older airport express and base station

Here is my method.. the software is free that is required.. always a good point.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Come si configura airport express con mountain lion?

Qualcuno sa come configurare o aggiornare airport express su mountain lion? Quando apro l'utility mi dice che questa versione non è supportata. Ho bisogno di un aggiornamento? Please help me!
Neuilly61

From Cult of Mac:
"It’s simple: the secret sauce that Apple requires to make AirPlay Mirroring work is on-GPU H.264 encoding, or the ability to compress video on your device’s actual graphic chips without calling upon the CPU.
It’s not just Macs that can’t use AirPlay Mirroring if they are older than 2011: even on the iOS side of things, you need a minimum of an iPhone 4S or an iPad 2 to use AirPlay Mirroring on your Apple TV. Why? Because older iOS devices don’t have on-GPU H.264 encoding either."
I am not sure how this doesn't "make scence." To be honest, I don't necessarily disagree with the two of you - Apple should have been more transparent in their release notes when specifying which computers are capable of AirPlay mirroring with Mountain Lion. I guess I felt like I got burned by Apple back in 2005 when I bought an iPod Nano right after they released it and then they had the "One More Thing" unveiling of the new color iPod that played video, which I would have bought instead. I realized at that point that it wasn't really going to be feasible to have all the "latest and greatest" of Apple's products without constantly breaking the bank.

Error when trying to connect Airport Express to Base Station

I came home today and the light was flashing amber on my Express. Tried to re-connect but keep getting this message: "There was an error setting up this wireless device for WDS. Quit Airport Utility and try again." I have, several times and it still won't connect. Got any ideas? My wireless router is the older Apple version flying saucer.
Thanks....

Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

I accidentally set my airport express to base station when it should be my time capsule and can't set it back

I'm an idiot!
I have my Time Capsule as my base station. I have two Aiport Exrpres' that connect to them.
One of the AE's was not working right, so I went it, did a soft reset, and using the Airport Utility, I accidentally identified the AE as the base station.
I've now gotten the Time Capsule set as the base station, and of of the AE's working off of it...however, when I plug the other AE in, it trumps the Time Capsule and shows it as the base station, and then the TC doesn't work.
I've tried doing a soft reset, and then hitting forget, but I can't figure out how to how it show as the child to the parent (the TC), as the other AE does.
Help!!
Thank you,
Dennis

Thank you, that seems to have done the trick...I knew Apple would be much easier than Windows!
I appreciate your help!
Dennis

Apple AirPort Express wireless base station & aol uk

HI want to get this base station but need to know if it will work with my ISP AOL any help please greatly received thanks John

If AOL provides a modem to UK customers, then yes it will work. For more info:
https://discussions.apple.com/thread/1419772?start=0&tstart=0
However, if it doesn't, you can still make it work. All you have to do is purchase an ADSL2+ modem such as:
http://www.ebuyer.com/262957-tp-link-adsl-modem-router-1x-ethernet-port-td-8816 (don't take this link as an endorsement, I have no idea whether it will work).

Maximum number of simultaneously streaming AirPort Express stations?

Hi everyone,
does anybody know how many AirPort Express (AirTunes) base stations iTunes can stream to? I know that you can select to use both your Mac's internal speakers and a wireless AirPort Express, but how many more stations can be used simultaneously?
I'm thinking of using a Mac mini (current model, 802.11n) and up to 10 (yes, ten) AirPort Express base stations (also 802.11n).
Thanks
Björn

Thanks for your reply! I was thinking the same, but had hoped somebody might have a big installation like this and could share his experiences. I found this (dated) support document which mentions that typically it's 3 to 6 stations: http://support.apple.com/kb/HT1515
The n-model came out March 2008 so the document (from June 2008) might still be valid.
I'll wait a while before closing this thread in case somebody with a high number of Expresses sees it.
Thanks!
Björn

AirPort Express connected printer only prints in black and white

I have a HP Deskjet D4160 connected to my Apple AirPort Express wireless base station. Wireless printing from my Macintosh works just fine, except for the fact that the printer will only print in black and white when connected wirelessly. If I disconnect the printer and connect it through USB, it prints just fine in color.
This printer has never printed in color when connected wirelessly. All my software is up to date as far as the Mac and the HP drivers go. PLEASE HELP!
I know I'm not the only one experiencing this problem. A quick Google search will bring up hundreds of thousands of others experiencing the same problem I am.

I tried turning the printer on when it only said 35% but it still printed out in black and white. It hung at 35% after about 3 minutes so I don't think I could have waited it to get to 100%. Usually print jobs get in the queue in a matter of seconds so I don't think the workaround is working for me.

Airport express con vodafone station

Similar Messages

Maybe you are looking for