Airport Express do not print with Epson RX500

I just bough a Airport express for our office. Everything works fine except that I have tried to print with our Epson RX500 printer and it doesn't seem to work. We have to Powerbook on 10.4.3 and although the computer seems to see the printer, we can't print? Could someone help us? Thakns

I am not familiar with this particular Epson model (I use an Epson CX4600) but I would suggest installing the printer directly to the Powerbook and make sure it prints there first. Check the Epson site for any updated drivers.
Once the printer is working hooked directly to the Powerbook, do an additional install (as a Bonjour printer).
That process has worked for me in the past.
David

Similar Messages

  • Elements 11 will not print with Epson R2000?

    Cannot make Elements 11 work with new Epson r2000 printer.  Prompt on screen states it is not compatible or settings are not correct.  Epson tech support worked on it, said to contact without success, said to contact Adobe.  Printer works fine on all other applications.  Help please.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • "Airport Express" is not compatible with this version of itunes

    Hello- My itunes reports that my airport express is not compatible with this version of itunes.  My ipod and iphone no longer sync with the device either.  Any suggestions?  Thanks!

    Does anyone out there have any advice?  I have had no success correcting this problem........

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • My airport express is not connecting with my airport extreme base station. They are probably six years old. My IP address on my express shows 0.0.0.0

    My Airport extreme and my airport express are not connecting together. I get an error message saying that my airport express software is not compatible with my Airport extreme and I have use them together for the past five or six years. It says I may need to change my IP address on my computer or something like that but I don't know what to do. the IP address on my express shows 0.0.0.0. Should everything be on the same IP address? Any help would be greatly appreciated. Thank you

    Please refer to the information already posted above:
    If you see A1084 or A1088 there, your older Express is not supported by the newer version of AirPort Utility that you have.
    If you have another Mac running Leopard or Snow Leopard, or a PC, then you could use that computer to administer the older Express and it will work on the network along with the AirPort Extreme.
    If the Mac running Leopard or Snow Leopard or PC does not "see" the A1084 Express, you will need to "hard reset" the Express by holding in the reset button for 10 seconds and waiting a full minute for the Express to restart. Then, reconfigure the Express again.

  • Need Help...my wireless airport express will not work with my update of snow leopard

    after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

    If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

  • Airport express G not working with new linksys N router

    I just swapped a new linksys N router into my old G network and my old airport express is flashing amber and refusing to acknowledge the network. It does not seem to be picking up. What does this mean and how do i fix it? thank you in advance

    someone posted this anyone , not sure i actually understand all of it
    hours of digging through blogs and Apple help docs, with some luck and trial & error, have gotten it to work. This experience seals the deal...if a Mac can ever run Excel, I'm abandoning my PC.
    For the benefit of anyone else in my situation, here's what I did:
    You have to override Airport Express's default desire to make itself the hub of a new network, and force it to be added as a client to your own network.
    First, plug the Airport Express into the wall, then reset it by holding down the reset button with a paper clip for about ten seconds. Plug in an ethernet cord that's attached to your wireless router.
    Open the Airport utility which you should've installed from the cd in the package. It should now recognize your Airport Express and the light will turn green. Be patient...mine took awhile, and even started flashing amber before it worked.
    You will need to manually configure the AE from the utility by typing in the name of your wireless network, setting AE to "join an existing network" instead of its default "create new network," and enable Airtunes.
    You may need to add the "Airport ID" printed on the case of the unit to your router's MAC list. This allows the router to recognize the device. Type your router's IP address into the address bar of internet explorer to access the router settings.
    If you don't see your speakers listed in a box at the bottom of iTunes, you will need to go to the settings window (in iTunes) and click "search for remote speakers connected to Airtunes."
    gonna try it out, cause nothing else has worked

  • Airport Express/AirTunes Not Working with New Verizon FIOS Connection

    I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
    In more detail:
    Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
    Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
    Any help would be appreciated.
    Thanks!

    Still no luck. The green light is on for the AE.
    Thanks in advance for the help.

  • Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

    Hi,
    I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
    Thanks for your time.

    The same thing started happening to me this morning.  I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes.  Everything worked fine until this morning.  I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything.  The problem persisted.  However, I had no problem playng music from my iPad library through the system using the iPad. 
    I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app.  Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro.  I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message.  When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time.  When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help. 
    For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

  • Why my older Airport Express does not work with OS-X 10.9?

    After getting my new iMac and upgrading to Marveric, I can not get my older AirPort Express work. Why?

    Mavericks does not support the older "b/g" wireless versions of the AirPorts, only the newer "n" wireless versions.
    You can use another Mac running Leopard or Snow Leopard, or a PC to administer the older AirPort Express.

  • Airport Express to share printer with HP desktop and Macbook Pro?

    How do I network my Mac Pro and HP desktop to use the same printer?  Any details are never too small..Tks

    Run the AirPort Admin Utility and make sure the AirPort Express has DHCP disabled. You should then be able to see computers on the ethernet portion of your network from the wireless portion.

  • Apple airport express will not work with my iPad ?

    Apple network. Cannot be set up by this soft ware  ( this is the message I get when trying to set uo apple airport express

    I'd take a free Express.
    Use AirPort Utility - it's free too.

  • Elements 11 will not work with Epson r2000 printer

    Cannot make Elements 11 work with new Epson r2000 printer, works with all other applications.  Epson tech support could not fix, said problems was with Elements 11.  After making all settings including having Phtoshop manage color and turning off color management in printer, receive Photoshop prompt stating "printer is not compatible or printer settings are not correct.  Need help, thank you.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is it possible to use my Airport Express s/n HS4430MTR4P with iTunes 11.0.1 ?

    Serial Number: HS4430MTR4P
    Model:
    - AirPort Express
    Codename:
    - No codename assigned.
    Build Country:
    - This unit was built in Taiwan.
    Build Year:
    - This unit was built in 2004.
    Build Week
    - Your device was built in week 43 of that year (October).
    Production Nr.:
    - This unit was number 741 to be built that week.
    WiFi:
    - 802.11 b/g

    I was rather surprised when it didn't work.
    I have the latest version of iTunes and the icon appears when they have established connection but when I click on it I get:
    The AirPlay device "Mark's Airport Express" is not compatible with this version of iTunes.

  • Printing with Epson 3800 via Airport Express

    I'm trying to get my Epson 3800 printer working over a Airport Express connection (3800 -> USB on Airport Express). The printer is showing up fine, however when I get to the print dialog I don't have all the advanced controls as I do when printing directly connected to the computer (printer settings and advanced media control).
    What do I need to do to get those working?
    OSX 10.6.3 with the current 3800 driver (6.11) and firmware (o02179_q).

    Hello Jeff,
    There could be one of two things causing this.
    1. The print dialog is not expanded. When you select to print, if you only see the Printer name and the Presets menu, then you need to click the triangle next to the printer name. This will expand the print dialog view and show you all the menu options.
    2. If the print dialog is expanded but the menu options are different, then you may have created the print queue for the Airport connection using the Gutenprint driver. If you open Print & Fax and select the 3800 queue for the Airport connection, in the right hand pane you can see what driver is being used in the Kind section. If this shows Epson 3800 - Gutenprint v5.x.x, then you have created this print queue using the Gutenprint driver rather than the Epson driver. The Gutenprint driver usually provides most of the functions you would require, they are generally just located under different menus. So you can choose to keep using the Gutenprint driver or delete this queue and create it again, ensuring you select the correct Epson driver.
    Pahu

Maybe you are looking for