AirPort Express do not show up in Itunes

Hi
Installed Airport Express as a client.
I bought it for the main purpose of straming music.
Well, in Itunes there is noe speaker options after install.
I´ve checked the firewall for Itunes but no speakers.
Any ideas?
Sven

This should help:
http://docs.info.apple.com/article.html?artnum=301514
http://docs.info.apple.com/article.html?artnum=93396
http://docs.info.apple.com/article.html?artnum=108071

Similar Messages

Airport Express does not show up in iTunes to stream audio...

I updated iTunes to 8.0 and no longer can see my Airport Express as an option in the pull down screen to stream audio from my iTunes to the AE.
The AE has a green light. which makes me believe that it found my LAN, but it can't find my mac.
Router: Linksys BEFSR41
iTunes: 8.0.2
What am I doing wrong? Why did it break after upgrade to 8.0?

I have a linksys wired router BEFSR41 and was not able to see Airport express in the iTunes page to stream music to my A/V device for quite some time.
Linksys set up page has a setting called "Filter Multicast in "security" section that allows for multiple transmissions to specific recipients at the same time.
The factory default is "disable". Change this to "enable" and save settings.
I did not have to restart iTunes to see the change take effect. The Airport Express showed up along with AppleTV for me to select...

Changed Airport Express names, not showing correctly in iTunes

I needed to swap the location of two Airport Express units, and I renamed them accordingly. They show up properly within Airport Utility/OS X, but within iTunes they seem to be cached to their old names. How do I reset them, flush the cache, or simply get them to show properly within iTunes?

another forum answered it.
airport utility, manual setup, music tab, there is a space for the name to show in itunes.
simple and solved.

Airport Express speakers not showing in itunes

Hi,
I had my Airport express working nicely, but then (foolishly), played around with it a bit and I'm now in a world of pain. I have a G5 imac talking to an AE base station hooked to a DSL router and my stereo.
What's not working:
1. The remote speakers don't appear in itunes.
2. The setup assistant & admin utility can't automatically detect the base station, either through the assistant or by the admin utility. (not sure if this is related or not).
What is working:
- I can change the settings by manually selecting the ip address of the base station and logging in.
- I can connect to the wireless network, and I can access the internet through the base station.
I've tried factory reset (both holding reset for 10 seconds & holding reset for 10 seconds while plugging the AE into power).
I've tried the base station with 6.2 and 6.1.1. I'm using v 4.2 of the airport admin software. I'm using v4.9 of iTtunes.
I've configured the base station to "Enable airtunes on this base station". I've configured iTunes to "look for remote speakers with Airtunes".
I'm just about at my wit's end. Any ideas?
Tom

It's working again. Honestly, I'm not sure what did it but here's what I have as a setup now.
I bought a Linksys Wireless router and changed the AE from router to a client.
I installed today's Security Update.
I deleted iTunes and reinstalled v4.9. I fiddled around a lot with turning on/off the iBook firewall as well as enabling the router's firewall.
I also added the iTunes ports (3689 tcp and 5353 udp) to the port triggering tab of the router. I restarted iTunes after all this and my remote speakers suddenly showed up.
Oddly, is that I removed all the settings that I had turned on (ports, firewalls on iBook, etc) and it's still working. I don't know what happened or what triggered it to start working but i think it has something to do with the ports. Who knows. Sorry that I don't have a more definitive solution for others who experience this.

Airport Express does not show up under 10.3.9 - but shows up under 10.4.9

Hi
my Room Mate uses an PowerBook with 10.3.9 and was able to use his Airport Express before without any problem.
Without any reason the Airport disappeared from the options in his list in the taskbar, also looking for preferred networks does not show the station.
BUT
if I start my PowerBook - running 10.4.9 - with the latest Utility Program that came with my Airport Extreme BaseStation - I have no problems to identify, configure and connect to the Express Station!
Why is my Room Mate unable to get the Airport Express on his Mac?

Max,
As I read it below, you both have separate internet sources and basically two separate wireless systems. He uses the Airport Express as a base station for his system and you use an Airport Extreme 802.11n for your base station.
You said he used to be able to access the system but now he can't. What changes to the system were made during that period of time.
Under these circumstances what I think I would try is for him to open up the old Airport Admin Utility, factory reset his Express, and then try to reconfigure it to build his own wifi system with the old Airport Admin Utility. Once he factory resets it goes back to the factory id and loses all memory of any system it may have been tied to.
I'd call the new system a different name than the old system and if he uses security use a different password than the first one.
The thing I don't understand below, if he has his own separate system, I don't understand how you can see and edit his settings because he's not part of your system. However, since you have to be using 10.4.8 or later for the new 802.11n Extreme and it looks like you tried configuring his system with the new Utility and he's running 10.3.9 - that may have something to do with it.
Beyond this, it's out of my knowledge base.

I have a new internet service provider and router and need to re-connect to my airport express. However, Airport Express is not showing up. Also, when I launch Airport utility (new and 5.6), it shows no available devices. What am I doing wrong?

iMac (2008), 10.7.5
Airport Express (2008)
Comcast wifi router

The AirPort Express must be reset back to factory default settings first, and then reconfigured again.
To reset the AirPort......
Power off the device
Wait a minute
Hold in the reset button first, then continue to hold the reset button in for an additional 10 seconds while you simultaneously plug the AirPort back into power
Release the reset button after the hold period and allow a full minute for the AirPort to restart
Try using AirPort Utility 5.6 now to see if it will "see" the AirPort so that it can be set up again.
If you are using AirPort Utility 6.x, you must first click on the Other WiFi Devices tab, then click on AirPort Express to start the setup wizard

Airport express will not show up as a base station in Airport utility

I just got Quest service and also Airport express. I hooked it up to my Quest internet modem and Airport Express has a steady green light. That means it is receiving a internet signal right? Then why won't the Airport utility find it as a base station? I cannot go anywhere from there, as far as setting up a wireless network for the airport. Am I missing a key step or what can I do? HELP!

torenh, Welcome to the discussion area!
Have you tried doing a hard or factory default reset?
Have you tried temporarily connecting the AirPort Express (AX) via Ethernet to your Mac to configure it?

AirPort Express doesn't show in AirPort Utility any more/won't connect to network

I have an older airport express that I use wirelessly with an AirPort Extreme to extend my network and stream music via AirPlay. Within the last couple of days it has been unable to join the network. It has always worked just fine until now.
The Airport Express powers up, flashes green once, then goes to amber flashing and stays that way forever. The Airport Express does not show up in AirPort Utility at all.
I have tried soft, hard, and factory resets to no avail.
The Airport Express info:
Model A1084
Can't check firmware version beasue it doesn't show up in Airport Utility
The Airport Extreme Info (which is working perfectly fine):
Model A1143
Version 7.6.4
Any further suggestions?
Thanks,
Dawn

Mavericks (Apple) will not let you run an older version of AirPort Utility on Mavericks.
So I've just discovered. Unfortunately I don't think booting from my older OS is going to work either, as it appears that 6.3.2 is also what I have installed there.
Doesn't make sense to me still, though, as I upgraded to Mavericks on day 1, but the Airport Expressed worked fine until yeterday.
I have a roomie with a PC. Will see if we can configure it on his computer.

Airport Express 'names' not updating in Itunes 'speakers'

Love the iphone remote app
purchased a few airport expresses -
Named them - Renamed them
BUT itunes is NOT picking up the renames -
any clues on how I 'refresh' the speaker list names in itunes?

It has a separate name for the AirPort itself and the "iTunes Speaker Name." Use the AirPort Utility and click "Manual Setup" for the AirPort Express, then click the Music icon in the toolbar at the top. From there you can change the name it shows in iTunes.

"Airport Express" is not compatible with this version of itunes

Hello- My itunes reports that my airport express is not compatible with this version of itunes. My ipod and iphone no longer sync with the device either. Any suggestions? Thanks!

Does anyone out there have any advice? I have had no success correcting this problem........

My airport express is not connecting with my airport extreme base station. They are probably six years old. My IP address on my express shows 0.0.0.0

My Airport extreme and my airport express are not connecting together. I get an error message saying that my airport express software is not compatible with my Airport extreme and I have use them together for the past five or six years. It says I may need to change my IP address on my computer or something like that but I don't know what to do. the IP address on my express shows 0.0.0.0. Should everything be on the same IP address? Any help would be greatly appreciated. Thank you

Please refer to the information already posted above:
If you see A1084 or A1088 there, your older Express is not supported by the newer version of AirPort Utility that you have.
If you have another Mac running Leopard or Snow Leopard, or a PC, then you could use that computer to administer the older Express and it will work on the network along with the AirPort Extreme.
If the Mac running Leopard or Snow Leopard or PC does not "see" the A1084 Express, you will need to "hard reset" the Express by holding in the reset button for 10 seconds and waiting a full minute for the Express to restart. Then, reconfigure the Express again.

My airport express no longer shows up in Airport Utility since I got a new router.

Hi all, I'm scratching my head at this one.
For years I've had an Airport Express and it has worked fine. I was using it simply to stream music from iTunes on my PC as well as my iPhone and iPad to my home theater which is in a different room. I had a Linksys WRT150N wireless router, and the Airport Express would join my existing network and stream music via Airplay.
A few days ago I replaced my Linksys router with a Netgear WNDR3800, and the Airport Express no longer connected. I assumed I had to set it up again, but it is not even recognized by Airport Utility, so I can't get to the setup screen. I tried performing a soft reset, hard reset, and attaching the Airport Express to one of my Netgear's LAN ports via Ethernet cable, but it still won't show up in Airport Utility. The amber light just flashes on the unit and I can't access any setup screens.
Am I missing something obvious? All of the help tips assume the Airport Express at least shows up in Airport Utility. In my Airport Utility there is nothing to select and it says "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
I am running a PC with Windows 7 and using Airport Utility v. 5.6.1 for Windows.
Thanks for any help!
-Rob

Did you try temporarily connecting an Ethernet cable from your PC to the AirPort Express to see if AirPort Utillty could "see" the AirPort Express that way? This method will work virtually all of the time unless the Windows Firewall or the PC's anti-virus program is blocking the connection attempt from your PC to the AirPort Express.
If you want to configure the Express using wireless only, you need to remember that when you reset the Expess back to default settings, it is now producing a wireless network with a name like Apple Network xxxxxx.
You must log on to the Apple Network xxxxxx wireless network first....no password is required.....and then open AirPort Utility so that your PC will establish a connection to the AirPort Express.
Once the AirPort Express has been configured to join your Netgear wireless network, you can log back on to your normal wireless network and all devices will be working with one another.

Airport Express will not talk to my router

I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advance

I've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W

IPhone 4 will not show up in iTunes

My new iPhone 4G is NOT showing up in iTunes when I plug it into my computer.I've updated my operating system and I have the current edition of iTunes. I just did a software update and now my computer is installing an airport base station update but I don't even use airport for my wireless.
Has anyone else had this issue?? Any help would be appreciated!

If your iPhone, iPad, iPod touch or iPod nano (5th generation) is not recognized in iTunes on a Mac, you might need to remove and reinstall the Apple Mobile Device Service. Look at this article, http://support.apple.com/kb/HT1747

Another Apple TV not showing up in iTunes...

Ok, this is the config: Apple tv Software 1.1, iMac Intel 07/2007 with OS X 10.5.1, iTunes 7.6. All of a sudden the Apple tv did not show up in iTunes anymore (after working perfectly before). I have another MacBook and a Windows Vista System, both have no connection problems with the atv.
The atv can be pinged from the iMac, who does not show it in iTunes, without lag or packet loss. There is no firewall enabled. The atv connects perfectly to the internet and to the other computers (MacBook and Vista PC) via WLAN.
I did anything described on the support page to try to resolve the problem. I resetted the atv, I re-installed itunes... i upgraded to Leopard (after the problem showed up)... not resolving this issue.
Any clues?

My ATV mysteriously disappeared from iTunes today as well. I'd been using it all weekend to play music. Today I come home form work and it has disappeared from iTunes.
I restarted everything including the ATV. It will show up in iTunes at first but then I get a message that I might have a firewall enabled because iTunes can't communicate with the ATV. It gives me port umber to stop blocking. Then the ATV disappears again.
No firewalls turned on (Leopards Firewall is useless anyway since you can't specify numbered ports to allow communication through.) Nothing has changed in my setup.
I tired linking the ATV to my Macbook Pro Core Duo (G networking) and it kind of works. I got it to start syncing files but the progress bar in iTunes doesn't update. It stays stuck on one file. But the ATV is copying the files because after I lost patience I canceled the sync and found that some of the media had been copied over. When I tried to sync again I got the same error about a possible firewall blocking the port. After a few iTunes relaunches I got ATV to show up in iTunes again and it resumed trying to copy files over. Again the progress bar just stuck on one song.
The only thing I can think of is some kind of major interference that is nearby and out of my control. The ATV shows full strength in the Wifi Signal. It can connect to the internet and YouTube. But its iTunes connection is just plain flaky. I've switched on interface robustness in the AirPort base station. Still nothing.
Sorry I can't be of any help. Maybe more squeaky wheels get grease faster.
I'm so glad this thing broke right before "Take 2"

AirPort Express do not show up in Itunes

Similar Messages

Maybe you are looking for