Airport Express does not respond to Airport Utility

I use 2 Airport Express units as printer servers. I recently changed routers, and both started flashing yellow. I reset both and reconfigured using airport admin. The first is now working(I can print wirelessly from my mac laptop) . For the second I got a message after the reconfiguration that Airport admin had lost contact with it. I cannot bring it up using reset or ethernet. It flashes yellow soon after each reset.
While I was joining the forum and typing this it came back onto the screen as unconfigured. I reconfigured and get the same message:Airpport Utility was unable to find your wireless device after restarting. The device has been successfully updated, but there is a problem rejoining the wirless network. The AE is flashing yellow again. Any suggestions would be welcome.

The device has been successfully updated, but there is a problem rejoining the wirless network.
This is a famous "error" message that in effect says that the Express stored the settings that it received, but these may not have been the settings that it needed to join the network successfully.
Or, there were some other settings that were still stored on the Express, and the new settings are in conflict with the old settings.
My suggestion would be to first perform a Factory Default Reset on the Express and then try to reconfigure it again.
To perform a Factory Defaut Reset......
Power off the AirPort Express for a few minutes
Hold in the reset button on the Express and then keep holding it in for an additional 10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
Now try the configuration again.

Similar Messages

Logic express does not respond while loading!

When I start Logic express it takes 2 minutes to finally show up.When I look at the force quit window it says "Not Responding". This is after I hit create project.Logic was running correctly unitl I loaded Win XP through boot camp on a partintioned drive. This is the only thing I think it could be? But I cant unload XP, I domt' have an extra Key code. By the way this is a brand new iMac 2.4 chip runnning leopard

I'm having the same problem. It's weird. It eventually goes, but those 2 minutes feel like a lifetime!

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Express does not show IP address of wireless camera

I have a functioning Axis M1011 wireless camera, with a live stream into Safari on my local iMac. All is well.
My brand new Airport Express is definitely providing the wireless camera feed, as my internal airport card on my iMac is OFF.
What is odd is that Express does not show IP address of the wireless camera when you click on it in Airport Utility.
The iMac is static at 10.0.1.2. Express LAN IP is static at 10.0.1.1. The camera's wireless IP is static at 10.0.1.3.
I have a working, hidden network created by express.
I am baffled why express does not "report" the IP address of the camera that it definitely sees.
It does not report any wireless clients at all.
Any ideas?
Thanks.
mac

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

noelani72 wrote:
I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
Message was edited by: noelani72
Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
Good luck.

Firefox takes 6 minutes to load and then does not respond so what should I do?

After starting Firefox on my Mac (10.8) it takes 5 to 6 minutes to appear. A minute or so later the "Bookmarks and History system will not be functional because one of the files is being used by another application" message appears and Firefox either does not respond or responds very slowly to various mouse clicks and such. For example, I wanted to disable all plug ins and when I clicked on Tools and Addins it took three minutes for the tab to open and after 20 minutes still nothing had appeared on the tab. I've tried restarting Firefox, restarting the Mac, resetting Firefox to the default settings, starting Firefox in safe mode, renaming the places.sqlite file, uninstalling Firefox and reinstalling from a fresh download, performing a complete uninstall and reinstall in which I remove the Firefox folder from the Application Support folder after uninstalling, and relocating the plugins folder. I've tried just about everything in every Firefox support article that there is and nothing works. Any suggestions would be very helpful.Thanks.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back soon.

My JButton inside a JTable cell does not respond to clicks

I have a Jtable which extends AbstractTableModel and uses an arraylist to fill the data in the model. The first column of this table is my button column. I have a class for my button coumn which is:
class MyButtonCol extends AbstractCellEditor
        implements TableCellRenderer, TableCellEditor, ActionListenerMy button column class has getTableCellRendererComponent and getTableCellEditorComponent. My problem is that the button shows on the table but it does not respond to clicks. Any help will be appreciated.

That does not seem to be the problem. I have the method in my class but it still does not respond to clicks. This is my AbstractTableModel class:
class WorklisttableModel extends AbstractTableModel{
     protected static List<Worklist> transaction;
     protected String[] columnNames = new String[]{" ", "Modality", "Status","Patient name",
            "Patient ID","Date of birth","Study date","Referring physician","Description"};
     public WorklisttableModel(){
         transaction = new ArrayList<Worklist>();
         fillmodel();
      @Override
      public boolean isCellEditable(int row, int column) {
            return false;
      @Override
      public int getColumnCount() {
            return 9;
      @Override
      public int getRowCount() {
            return (transaction!=null) ? transaction.size() : 0;
      @Override
      public Object getValueAt(int rowIndex, int columnIndex) {
          if(rowIndex < 0 || rowIndex>=getRowCount())
              return" ";
              Worklist row = (Worklist)transaction.get(rowIndex);
              switch(columnIndex){
                  //case 0:return "";
                  case 1:return " "+row.getModality();
                  case 2: return row.getStatus();
                  case 3:return row.getName();
                  case 4:return row.getID();
                  case 5:return row.getDOB();
                  case 6:return row.getStudyDate();
                  case 7:return row.getReferringP();
                  case 8:return row.getDescription();
           return " ";
      public Class getColumnClass(int col){
          return getValueAt(0,col).getClass();
      @Override
      public String getColumnName(int columnIndex) {
            return columnNames[ columnIndex ];
      protected void fillmodel(){
          transaction.add(new Worklist("","US","active","Simpson","1232222",new java.util.Date(73,8,12),new Date(18,8,13),"Dr. Francis","Brain"));
          transaction.add(new Worklist("","US","inactive","Dodggy","3498222",new java.util.Date(83,8,12),new Date(16,8,17),"Dr. Francis","Heart"));
          transaction.add(new Worklist("","CT","active","Williams","7892222",new java.util.Date(98,9,5),new Date(19,2,13),"Dr. Evans","Dental"));
          transaction.add(new Worklist("","MR","inactive","Brian","89765412",new java.util.Date(65,5,23),new Date(19,1,18),"Dr. Evans","Brain"));
          Collections.sort( transaction, new Comparator<Worklist>(){
          public int compare( Worklist a, Worklist b) {
              return a.getName().compareTo( b.getName() );
}

Customize toolbar does not respond.

I was trying to add and remove some icons on my safari toolbar and found out that it no longer responds. I cannot drag and drop icons, or remove icons. The only thing that I can do is right click on an icon and "add icon" but as far as removing them it does not respond. Can somebody help ?
Thank You

Have you tried restarting or running Disk Utility/Repair permissions? You may need to delete the .plist from your user folder. Hold down the option key and use the Go To Folder command from the Finder. It should reveal you user library.

Finder DOES NOT Respond after Restart, Or Shut Down

I am running an iMac G5 on OS X 10.5.4, After a shut down or restart, Finder does not respond, The only thing on my desktop is My HD and Chosen wallpaper. I can launch Apps from the Dock, but not folders from the dock, Not Downloads folder, Documents Folder, Just Applications, which is weird because they are in finder too! Mail starts up when I log in so I can access Mail, I use Firefox, When I click on it in the dock it starts up no problem, after a while Finder does respond, I get all my icons back on my desktop and can access folders. I have Cleared System Cache, Browsers Cache, I ran Disk Utility and REPAIRED Disk permissions. No help. Short of RE-Installing Mac OS X, What Should I do? Is this happening to anyone else??

I am having the same problem!
I have tried the following: deleting the com.apple.finder.plist, deleting the com.apple.sidebar.plist, I have reinstalled the 10.5.5combo update, I have deleted all of my photoshop preferences (possible solution from another thread), and it is still doing it!

I have an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another programve an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another program

I have an issue with the Recycle Bin. It does not respond if I click on the Icon. I have to empty the bin via another program

"CCleaner" is a scam and it may well have corrupted the operating the system. Get rid of it according to the developer's instructions, then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon, usually with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Address Book does not respond, why

Address book is stuck. I open it and it simply does not respond.

So there is something wrong with permissions on your disk. I am not enough of a geek to do other than make the standard suggestions:
Do all the disk utility repairs (even if this means booting off your repair CD), run all the daily/weekly/monthly scripts (I use Yasu for this), click your heals together three times and say "I wish, I wish, I wish..."
If worst comes to worst, you could try
1) Create a new user
2) Copy ~/Library/Application Support/AddressBook from the old user to the new user (by way of ~/Public)
3) Open AddressBook in the new user
4) If it opens and if the addresses are there, do an export
5) Delete files until AddressBook opens in the old user with an empty address book
6) import the addresses from the new user
Obviously, I have never done this, and the steps above are an outline, not a recipe, but it might work.
A
Good luck.
Dual G5 + 15" MBP 2GHz Mac OS X (10.4.6)

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

Satellite A200: Bluethooth Stack & Flashcard does not respond

My new A200 gives me a headache. After receiving the following message: Thank you for evaluating the Bluetooth Stack for Windowsby Toshiba. The evaluation period has expired. Please obtain a license for this version of Bluetooth Stack for Windows by Toshiba" I downloaded the Bluetooth stack Multilingual from Toshiba's homepage. It does not work, I receive still the same message and cannot use bluetooth anymore.
The second message I receive always is "that the Toshiba Flashcard does not respond" then Vista is looking for a solution but does not find anything.
The third problem is to include a second monitor. One time only it worked fine, but never again. I cannot control the second monitor via the Notebook, sometimes I cannot extend it, sometimes I can but the second monitor works in slow motion. I use a Targus docking station.
thanks
Heidi
Message was edited by: heidirenken

Hi
This message is meant for developers of third-party Bluetooth adapters, but may appear if you are using such an adapter with the Toshiba Bluetooth software 'stack' -- rather than with the adapter manufacturer's stack. The third-party Bluetooth adapter may work with the Toshiba Bluetooth stack, but only for a 30 day evaluation period.
If you are using an 3rd party Bluetooth adapter, obtain and install the correct Bluetooth stack from the manufacturer of the Bluetooth adapter.
If your notebook was already equipped with the BT card then you dont need to obtain the BT stack version from any other 3rd party manufacturers.
You should be able to download it from the Toshiba page, from your Satellite A200 download area.
I have also received some issues with the Vista Flash cards.
Seems there was a bug in old version. But dont worry; the new version was already released on the Toshiba page!
However, it looks like you have messed the whole OS because the switching to external monitor does not work too. So maybe you should recover the notebook with the Toshiba recovery CD and then update the Vista FlashCard utility.
Good luck

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

Airport Express does not respond to Airport Utility

Similar Messages

Maybe you are looking for