Airport Express doesn't play music after iOS7 / Maverick Upgrade

I have speakers connected through Airport Express so that I can stream music wirelessly through my Macbook / iPhone / iPad.
After upgrade to iOS7 / Maverick, the Airplay does not work. Through all the devices, airplay connects with a really short sound of music initially and then goes blank where all the devices still show Airplay is connected.
Did anyone else face this problem or have a suggested solution?
Thanks for help, much appreciated.
Cheers!

I had the same problem, iPod-app crashes, iPod-app didn't play any music in my car (MINI with USB-Audio interface).
I tried restoring with iOS4 and restored from the recent backup. Same problem.
My last try was to restore the iPhone with iOS4 without restoring a backup (= fresh iPhone 3G with iOS 4.0). Afterwards i've installed some apps and put some music on it. I've tried it in my car: no iPod crashes, works like it should, no problems so far...
The only thing I have to try is Audiobooks. With iPhone OS 3.x I had the problem that sometimes the Audiobooks wont resume the position and played from beginning, hope the fresh install also solves this problem as well.
I'm an iPhone user since the beginning, I've started with the original iPhone with iPhone OS 1.1. During all the OS releases and all device upgrades/replaces I've allways migrated my content, so I suggest that there are some settings from older OS versions that screw up the system. One complete reset is okay for me. It's a bit of work to do (backing up data in each app), but it's worth it.
Frank

Similar Messages

  • ITunes doesn't play music after sleeping mode.

    iTunes doesn't play music. I try to start any song by remote app in iPhone from sleeping mode of mac mini.
    I can see all my music library, choose any artist and any albom.
    But when I try to start the music nothing is happen.
    The button Play/pause doesn't work and the play-bar is not moving.
    This issue have appeared after upgrade to iTunes 11 and new remote app.
    After reboot iTunes everything is ok, but in a sleep mode I have the same problem.
    Please help!

    okay. i solved the problem. After reading a few other posts on related topics, it appears that using either the Setup Assistant(instead of the Airport Admin program) or if you are using the new version called 'Airport Utility' to use the option to 'Assist Me'. After going through the setup in this way it worked!
    g5 2.5, G4 DA, Macbook, eMac, aTV, 46" Samsung DLP(1080i)   Mac OS X (10.4.9)  

  • Using Multiple Airport Express units to play Music to Multiple Sound System

    Goal
    - play music on my iMac and in one other sound system(I'am aware of the one
    system limit )
    - I have multiple Airport Express units(3) for different sound systems and wish
    to select the room using iTunes.
    Reality
    if I reset all the airport express units in the house(3) I can initially see the units. On going through the setup I'am able to configure each unit to be part of my wireless network and get the airport express to power cycle. However after this process only the last AE unit is visable via itunes. If I use the airport utility it can find no units when scanning. If I power cycle one of the non visible units it becomes visable but I cannot play music to the unit and trashes the connectivity to the one working AE unit.
    What am I doing wrong ?

    Sorry - I led you astray unnecessary in my last posted message. The reference I provided was for setting up a remote base station. That is not applicable to your situation, so please ignore.
    In your case, you want to use the Airport Utility to configure each Airport Express so that it "join" (and not "extends") your existing wireless network.
    What I suggest you do is:
    1. get each Airport Express into a known default state by doing a factory default reset per these instructions. Hold down the reset button for 10-15 seconds, until you see four green flashes in rapid succession
    2. put all Airport Express devices, and the wireless Mac you are using to configure the Airport Expresses, into the same room as the wireless router you are using
    3. configure one Airport Express at a time, and as I said above use the Airport Utility to configure each Airport Express to "join" the existing wireless network - ie select your Airport Express device as shown in the Airport Utility, click the "Continue" button (not the Manual setup button), and follow the instructions. The name of the wireless network you are joining is the same as the name of the wireless network your existing wireless router is creating. Make sure you also specify the same security protocol (WEP/WPA) and wireless network password as your Mac requires to connect to your existing wireless network.

  • Airport Express Isn't Playing Music Through Stereo

    I have recently purchased an Airport Express. I have managed to connect it to our home wi-fi but when i want to play music through Airplay through my stereo, no sound comes out. The option to play music through Airport is available on both iMac and Iphone and the button turns blue when selected.
    Really need help on this.
    Cheers

    Hi Jono,
    You may want to double check your configuration with the AirPort and your stereo using this article.
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
    http://support.apple.com/kb/HT4587
    If all of that is good, then take a look at the AirPlay troubleshooting article found here:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    - Griff W.

  • Apple TV 3rd Gen no longer sees Airport Express 1st gen in Airplay after update

    Apple TV 3rd gen was connected to AirPort Express 1st gen via WiFi, drove a video device via HDMI
    and sent audio to the AirPort using Airplay and selecting the AirPort Express under Speakers.
    I could adjust the volume with the AppleTV remote.
    Apple TV was stored unused for a while.
    After powering on yesterday, I ran the update.
    Now Apple TV is connected to the Airport Express via WiFi
    but Airport Express doesn't show in AirPlay settings.
    I can still use AirPlay from my MacBook running Snow Leopard.
    There are no updates available for the AirPort

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Airport Express doesn't work with Mountain Lion

    I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers. 
    Not only that... but the airport utility doesn't support my airport express.
    Time Machine doesn't work either....
    I want my snow leopard back!!!
    Any insight????

    I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!!  I'm not liking the switch at all.  I've spent more time fixing problems with this ... how can I go back???

  • After doing an OS update, now iTunes stops playing music after playing a few songs.

    After doing an OS update, now iTunes stops playing music after playing a few songs. Any thoughts about how to remedy this?

    Same Problem here. Also, when this happens, it loses whatever album art was playing before. I've tried reinstalling and it doesn't help. Any ideas how to fix this? It's really annoying!

  • Can't get airport express to connect to internet after ISP changed my modem

    Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

    Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

  • Using Airport Express / Airtunes to play audio from Safari / OSX?

    Just bought my first Airport Express. Can I use Airport Express / Airtunes to play out audio from Safari / OSX (or other applications) to my home stereo?

    Hi Fenneberg:
    Welcome to Apple Discussions and congrats on your AE purchase!
    You'll need a 3rd application to stream music to your AE from other applications like Safari. It's called Airfoil and it can be found at: http://www.rogueamoeba.com/airfoil/
    I hope this helps!

  • Airport Express Doesn't Work With Leopard?

    I upgraded to Leopard, and am trying to install my new Airport Express. I get an error message saying that Airport Express doesn't support the current OS. Anyone else encountering that?

    You shouldn't need to install software unless you buy a base station released -after- the OS you're using was released. Leopard already contains a newer version of software for configuring the Express, AFAIK.

  • Ever since I updated the operating system, itune doesn't play music on iphone 4. if it plays, it plays only one song and gets stuck.

    Ever since I updated the operating system, itune doesn't play music on iphone 4. If it plays, it plays only one song and gets stuck. I've tried to reconnect to the computer to see whethere there has been missing portion during the upgrade... but not really. does anyone have the same issue?

    What does "gets stuck" mean?
    It repeats?
    It stops playing?
    Have you tried the basics from the manual?  Restart.  Reset.  Restore.

  • Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

    Iphone6 doesn't play music (have tried obvious things like volume etc and plugged in headphones, connected to a speaker via bluetooth, and tried to play from the inbuilt speaker). Does anyone know what the problem is and how it can be resolved?

    You can't buy the part from Creative as a spare.
    I'm not sure how compatible other parts might be, but that would be a question for someone who really knows a lot about this area of electronics.
    The Creative repair for this is likely to be expensi've, but the problem is most likely a broken solder connection than an actual new headphone socket. So if you know someone experienced in surface mount soldering you could probably get it repaired just with this.

  • I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

    I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

    Hi Jake,
    Is it connecting to the Router or Modem?
    Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    old... http://docs.info.apple.com/article.html?artnum=106653
    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
    208.67.222.222
    208.67.220.220
    Then Apply.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

  • Ipod nano 3rd generation doesn't play music and doesn't synchronize with itunes

    I have a ipod nano 3rd generation ( 8 GB) and it suddenly stopped playing music. The ipod doesn't  play music even if I choose another song and the ipod doesn't synchronize with itunes anymore. I did a reset of the ipod and I installed itunes new but the synchronization doesn't works.

    Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • Can play music after updating to 4.0.2

    My iPhone wont play music after updating. When I try to play a song it jumps back without playing after a few seconds. Any solutions?

    maybe same solution would help as in http://discussions.apple.com/thread.jspa?threadID=2534690&tstart=0

Maybe you are looking for

  • Global Service Monitor (GSM) Config

    Hello all, I have recently configured GSM with the external monitoring services being in the U.S.  When I look at the monitor - Authoring>MP Objects>Monitors>Multi-URL Template (*Monitor Name*) it shows enabled is set to true. However when I look at

  • How can I set up APN with B2G 2.0 on Geeksphone Revolution with Consumer Cellular (AT&T) in U.S?

    Tried multiple settings and worked with Consumer Cellular staff. (Consumer Cellular is an MVNO using AT&T.) I had this working with ZTE Open C (FFOS 1.3) after some experimentation. (I should have written down all of the settings before switching!) R

  • Error while installing AIA FP 2.5

    Hi, I am trying to install foundation pack 2.5 in windows 32 bit system. I downloaded the setup (V18466-01) from edelivery but whenever I am trying to run the setup.exe it is throwing an error that: "Unzip: No matching wildcard found for ..stage\Comp

  • JDBC receiver - Update problem

    Hi, Scenario: JDBC - RFC - JDBC scenario. 1. JDBC to RFC part- A select statement from the JDBC sender, is mapped to the RFC in the ECC system) 2. RFC response is then mapped to an Update query using a receiver JDBC adapter. (Please note: Only the RF

  • I can´t actualice my mac os x 10.6, why can´t?

    i really try to actualice my mac os x 10.6 and i can´t do it? what i need to do?