Airport express doesn't work correctly

I bought an airport express, configured as an extension of the time capsule wireless and it worked perfectly
and which later it broke.
I bought another, configured with the extension of the time capsule wireless network, the light is green, but no device can see the wireless network.
I can see it by my macbookair why I take the wireless network from the time capsule.
What can I do to solve the problem??
thank you
regads

Are you expecting to see one wireless network from the Time Capsule and another from the AirPort Express?  If the Express "extends" the network of the Time Capsule, there is only one wireless network.
If this doesn't explain things, please explain what you mean by "no device can see the wireless network".
By the way, I'm not sure why you flagged your own response as a "Helpful Answer".

Similar Messages

  • Airport Express doesn't work with Mountain Lion

    I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers. 
    Not only that... but the airport utility doesn't support my airport express.
    Time Machine doesn't work either....
    I want my snow leopard back!!!
    Any insight????

    I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!!  I'm not liking the switch at all.  I've spent more time fixing problems with this ... how can I go back???

  • DSL to Cable Modem switch - now Airport express doesn't work

    I just switched from DSL to Cable and now connecting to the internet via my Airport express doesn't work. It's fine direct connecting via ethernet.
    Is there a known issue? I've tried various things but no dice.
    Are my Airport expresses now married to the older modem?
    Any help would be appreciated.

    Okay I got a new Airport extreme since there was a chance that the new modem and the expresses weren't 100% compatible and the Extreme worked almost out of the box.
    Truth is, I might have just had to hold down the reset buttons on the expresses longer so that they would revert to the manufacturer's default and they might have become functional since I did that later and my old expresses are now connected to the home network.
    For anyone else with this issue, before giving up or if you don't need an excuse to buy an extreme, hold that airport reset button in a good two minutes before and then another two during the plug-in and you might get lucky.
    Thanks.

  • Airport Express Doesn't Work With Leopard?

    I upgraded to Leopard, and am trying to install my new Airport Express. I get an error message saying that Airport Express doesn't support the current OS. Anyone else encountering that?

    You shouldn't need to install software unless you buy a base station released -after- the OS you're using was released. Leopard already contains a newer version of software for configuring the Express, AFAIK.

  • New airport express doesn't work with Nintendo DS

    I just picked up a new Airport Express. The WEP setting doesn't seem to be standard. Instead it is this Transitional Security Network that doesn't work with the Nintendo DS or the Netgear WG511T card I have. Any ideas on how to get it to work?
    15" MacBook Pro 2.16GHz   Mac OS X (10.4.9)   7200 RPM HD

    yeah, the DS just ***** like that. Nintendo should have given it firmware upgradability.

  • (Macbook Pro - Airtunes - Dlink DIR-655 - Airport Express) doesn't work

    To all that might be having this same issue, I have confirmed with Apple that it is a problem (and the case has been escalated). In a nutshell, I am trying to stream music from my Macbook Pro to the network which will then talk to the airport express boxes.
    The Macbook Pro has an N-airport extreme card.
    The Dlink Router (DIR-655) has the Draft-N 2.0 spec.
    The Airport expresses are connected to my network.
    I have no problems using my Powerbook G4 with a 802.11g-equipped wireless card in this situation.
    My Macbook Pro, iTunes SEES the airport express, but when trying to play a song, the track sits at 0:00 and does not move(play).
    My Macbook Pro has no issues connecting to the internet, it just cannot stream music through.
    I have confirmed that the Macbook Pro CAN stream music to the airport express when they are on their own network (taking the Dlink router out of the setup).
    Why or why did Apple not include gigabit ethernet on their wireless base station!!!!!
    If anybody has or knows of a fix, I would be glad to hear it. If anybody has this configuration, but it works with a different wireless router with gigabit ethernet and Draft-N wireless, I would love to hear from you as well!
    Macbook Pro (Core 2 Duo)   Mac OS X (10.4.9)  

    I have been having problems with my dlink dir 625 n router as well and after months of problems I finally fixed the problem. The funny thing was that everything worked fine with my imac... it was the macbook pro's airport that wasn't seeing the router correctly.
    I just enabled wap2 on the router as the security setting and for some reason now everything is running as it should, upload and connectivity are great!
    Hope this helps

  • Upgraded to iTunes 11.0.5 and now Airport Express doesn't work

    Just installed the iTunes 11.0.5 update and now I can't get my Airport Express to work.  iTunes won't play and says it can't recognize the Airport Express device.  Even when re-booted at both the iMac and the Airport Express - the link is broken.  iTunes won't even play the media when the Airport Express is selected -- but the Apple TV and the Computer both work well.   Never had this issue before the 11.0.5 update.  Any thoughts or assistance?

    Thank you very much for your reply. I did find 2 previous iTune libraries but they seem to be empty.
    Your advice on back up is gratefully noted ... I always assumed Time Machine would do the job.
    I guess like many people I've spoken to it's time to move away from Apple ...a declinig market may be the only thing which will make them realise they need to be more responsive to and respectaful of  the millions of individuals who have been their loyal customers for many years.
    My business has started moving to Windows and we have been surprised how good it is and products like Office 360 are fabulous in the business environment. We have heaps of iMacs ready for the scrap heap!
    I am now looking for an alternative to iTunes. Not an easy feat but clearly there is a huge market opportunity out there for someone to produce a decent product. Any suggestions gratefully accepted.

  • Airport Express doesn't work with password

    I've been having a bizarre problem with my Airport Express lately. One day the internet stopped working so I restarted it a few times with no change. Then I did a hard reset. The internet starting working right after this. Then I tried to configure it to apply a password and all, and when it restarted the internet stopped working again. I've realized it only works when it's in "factory settings" mode, which is ok for now, but I need to put a password on it eventually.
    What's going on here?

    I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!!  I'm not liking the switch at all.  I've spent more time fixing problems with this ... how can I go back???

  • Airport EXPRESS doesn't work after software update on Airport EXTREME

    My Airport Express stopped working after I did my software update for my Airport EXTREME the other day. It lost the connection to my Airport EXPRESS and so I did a hard reset and tried to redo the whole profile but after many, many hard resets, I still can't make it work.
    Airport Setup Assistant shows that the setup is complete and everything is fine. But if I select "Extend my wireless range", after the setup, my Airport Express won't even appear anywhere. If I select "Join my wireless network" then it will appear with a 169.xxx.xxx.xxx IP address under my Airport Utility. It will also show up on my iTunes but I can't open it using Airport Utility and iTunes spends a long time searching for it and then gives up. In all the above cases, the amber light remains flashing and the green light never comes on. What else can I do to fix this??

    Either change the channel that the phone is transmitting on or change the channel the Express is transmitting on. You can do the latter in Airport Admin Utility; the former depends on your phone.

  • AirPort Express doesn't work with SB5100

    I'm helping a friend set up a new AirPort Express  MC414LL/A Model A1392 (802.11n) with her existing Motorola SB5100 DOCSIS 2.0 cable modem. I was able to setup the AirPort Express from her iPad with a network name and password. Also upgraded the firmware in the AirPort Express. However, the Airport Utility App on my iPad and iPhone connected to the AiPort Express, but showed no connection to the Internet. Furthermore, the PC that had been working fine when connected directly to the SB5100 could not make an Internet connection when connected to the AirPort Express.
    I brought the AirPort Express home and connected it to my Verizon FiOS Actiontec modem and it works fine - my iPhone and iPad connect to it and through it to the Internet.
    I'm wondering if the SB5100 is incompatible with the AirPort Express??

    It should work.
    Power down the modem and leave it powered down for a long time, as much as a half hour or longer is sometimes required. While it is powered down, disconnect its coaxial cable. Literally unscrew it and leave it that way.
    Connect the Express to your modem, leave them connected, and do not disconnect them from one another without powering down the modem again.
    Re-connect everything including power and let the devices complete their startup sequences. This usually takes a moment or two.
    If that does not result in success, "hard reset" the Extreme or Express according to the instructions below and start over from the beginning.
    If you still have trouble, contact AppleCare because you have done everything reasonable to get it to work.
    To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • AirPort Express won't work with 7.0.2

    Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

    My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
    This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
    If I change this to Extend A Network it doesn't work properly.
    This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
    It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
    The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

  • Airport Express wireless network works fine, but won't connect to Internet

    I had a power outage and since then my Airport Express doesn't connect to the Internet although everything else seems to work. I can see the AE just fine in the Airport Utility. My computer connects to the wireless network provided via the AE, so does my iPhone, so does my wireless printer, and I can print wirelessly from the computer to the printer, so the AE's wireless networking is working. If I directly connect my computer to the ethernet connection that I use for the AE, it connects to the Internet, so I have wired connectivity to the Internet. But somehow, I can't get to the Internet using the wireless network of the AE. Any suggestions on what I should try next?

    Hi there,
    Try to reset your Airport Express (AX), y pressing the little dot on the back of device. Keep pressed for some seconds until it flashes. Start then your Airport Utility and go through the setup process again. This will reset your whole wireless network. This may work for you. Good luck.

  • I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

    I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

    Hi Jake,
    Is it connecting to the Router or Modem?
    Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    old... http://docs.info.apple.com/article.html?artnum=106653
    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
    208.67.222.222
    208.67.220.220
    Then Apply.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

  • Need Help...my wireless airport express will not work with my update of snow leopard

    after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

    If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

  • Game Center doesn't work correctly

    Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
    It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
    Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
    The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
    I've restored my device several times, but it didn't help.
    How to solve it?

    I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
    There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
    Other than waiting for Apple to fix it I don't think there is a solution.

Maybe you are looking for

  • Iweb missing photo pages that exist on my .mac page...  can I get em back?

    recently upgraded to iWeb 09.... I published a photo page from iPhoto, and all went well - however, now I'm ready to publish another new one, and I notice that what exists on the .mac site has about 5 more entries than my local set as seen in iWeb ..

  • Why the battery of iphone 5s  be decharged too soon?

    why the battery of iphone 5s  be decharged too soon?

  • Authentication Using JSP

    Hi , am trying to authenticate against IS6.0 through JSP.JSP is running on tomcat and am using LDAP login bean(as given in sample) and am getting the following error javax.security.auth.login.LoginException: Failed to create New AuthContextError whil

  • BPEL - ODI Samples

    Hi, I am working on BPEL - ODI Integration. Can any body tell how to integrate BPEL with ODI and vice versa i have searched for couple of links but dont know where to start ? I have few questions too. - will be input request that needs to be passed f

  • Windows 7 client - compatible with BPC 5.1?

    We are running BPC 5.1, SP8. One of our users bought a new laptop which came with Windows 7 installed.  We are having difficulty installing the BPC for Office client (getting a message that "you are not authorized to install BPC for Office" even when