Airport Express doesn't work with password

I've been having a bizarre problem with my Airport Express lately. One day the internet stopped working so I restarted it a few times with no change. Then I did a hard reset. The internet starting working right after this. Then I tried to configure it to apply a password and all, and when it restarted the internet stopped working again. I've realized it only works when it's in "factory settings" mode, which is ok for now, but I need to put a password on it eventually.
What's going on here?

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

Similar Messages

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

New airport express doesn't work with Nintendo DS

I just picked up a new Airport Express. The WEP setting doesn't seem to be standard. Instead it is this Transitional Security Network that doesn't work with the Nintendo DS or the Netgear WG511T card I have. Any ideas on how to get it to work?
15" MacBook Pro 2.16GHz Mac OS X (10.4.9) 7200 RPM HD

yeah, the DS just ***** like that. Nintendo should have given it firmware upgradability.

AirPort Express doesn't work with SB5100

I'm helping a friend set up a new AirPort Express MC414LL/A Model A1392 (802.11n) with her existing Motorola SB5100 DOCSIS 2.0 cable modem. I was able to setup the AirPort Express from her iPad with a network name and password. Also upgraded the firmware in the AirPort Express. However, the Airport Utility App on my iPad and iPhone connected to the AiPort Express, but showed no connection to the Internet. Furthermore, the PC that had been working fine when connected directly to the SB5100 could not make an Internet connection when connected to the AirPort Express.
I brought the AirPort Express home and connected it to my Verizon FiOS Actiontec modem and it works fine - my iPhone and iPad connect to it and through it to the Internet.
I'm wondering if the SB5100 is incompatible with the AirPort Express??

It should work.
Power down the modem and leave it powered down for a long time, as much as a half hour or longer is sometimes required. While it is powered down, disconnect its coaxial cable. Literally unscrew it and leave it that way.
Connect the Express to your modem, leave them connected, and do not disconnect them from one another without powering down the modem again.
Re-connect everything including power and let the devices complete their startup sequences. This usually takes a moment or two.
If that does not result in success, "hard reset" the Extreme or Express according to the instructions below and start over from the beginning.
If you still have trouble, contact AppleCare because you have done everything reasonable to get it to work.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Airport Express Doesn't Work With Leopard?

I upgraded to Leopard, and am trying to install my new Airport Express. I get an error message saying that Airport Express doesn't support the current OS. Anyone else encountering that?

You shouldn't need to install software unless you buy a base station released -after- the OS you're using was released. Leopard already contains a newer version of software for configuring the Express, AFAIK.

DSL to Cable Modem switch - now Airport express doesn't work

I just switched from DSL to Cable and now connecting to the internet via my Airport express doesn't work. It's fine direct connecting via ethernet.
Is there a known issue? I've tried various things but no dice.
Are my Airport expresses now married to the older modem?
Any help would be appreciated.

Okay I got a new Airport extreme since there was a chance that the new modem and the expresses weren't 100% compatible and the Extreme worked almost out of the box.
Truth is, I might have just had to hold down the reset buttons on the expresses longer so that they would revert to the manufacturer's default and they might have become functional since I did that later and my old expresses are now connected to the home network.
For anyone else with this issue, before giving up or if you don't need an excuse to buy an extreme, hold that airport reset button in a good two minutes before and then another two during the plug-in and you might get lucky.
Thanks.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

AirPort Express won't work with 7.0.2

Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Airport express doesn't work correctly

I bought an airport express, configured as an extension of the time capsule wireless and it worked perfectly
and which later it broke.
I bought another, configured with the extension of the time capsule wireless network, the light is green, but no device can see the wireless network.
I can see it by my macbookair why I take the wireless network from the time capsule.
What can I do to solve the problem??
thank you
regads

Are you expecting to see one wireless network from the Time Capsule and another from the AirPort Express? If the Express "extends" the network of the Time Capsule, there is only one wireless network.
If this doesn't explain things, please explain what you mean by "no device can see the wireless network".
By the way, I'm not sure why you flagged your own response as a "Helpful Answer".

Older model Airport Express won't work with Mountain Lion Airport Utility

just upgraded to Mountain Lion and noticed that of my network of three airport expresses connected to various stereo speaker systems throughout the house, one of the older models won't work with the supplied version of Airport Utility (v 6.1). Here is the message it gives in the utility when I attempt to select this particular Airport Express:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
Well, I go to download v 5.6 and none of the versions available will install on Mountain Lion! (even the version for Lion) Catch 22.
Any resolution to this (other than having to go out and buy a newer version Airport Express)?
Michael

Learn how to install AirPort Utility 5.6 on Mountain Lion here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Airport Express won't work with VPN

Finally made it through the nightmare of setting up my Airport Express to act as a wireless print server on my existing network (Linksys WRT54G router). However once I log onto my corporate VPN, I cannot print or even see the Airport. I have checked the LAN access box on the Transport tab of my VPN software which is supposed to allow split tunneling, but no luck. Everything works fine once I log off the VPN. I bought the Airport Express specifically because an Apple rep told me it would work with my VPN. My previous wireless print server (Linksys) would not support VPN.
Appreciate any help!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Airport express won't work with Extend Network, only Create Network

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings. If I change this to Extend A Network it doesn't work properly. It keeps kicking me on and off WiFi, but the former way works with no foreseen issues. What is going on? I can't extend my guest network with the first option, I don't believe.
I have a 5th Generation AirPort Extreme and a 1st Gen AirPort Express.

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

My 5 year old Airport Expresses don't work with the new Airport Time Capsule?

My question is after wasting hours trying to install my new Airport Time Capsule, Ive noticed that the "Airport Utility" doesn't recognize any of my 4 five year old Airport Expresses. An error message says " This version of Airport Utility doens not support this (these) base stations"? Does that mean that their is no work arounds which means I have to purchase 4 replacements?

You need the older airport utility.. that can be installed on Lion or Mountain Lion.. it cannot be installed on Mavericks.. do you have an older computer even a windows one.. or can access, borrow or bribe a friend over for drinks with laptop.. then you can configure your expresses.. !!
There is a rather complex workaround on Mavericks.. when I posted it in the past.. Apple deleted it.. go figure.
Kappy's post is still there.
https://discussions.apple.com/message/24338414#24338414
Perhaps they like him more than me.

My airport express no longer works with my network

The airport utility does not recognize my airport express. It was suggested to download Airport utility 5.6.1 but that is no longer compatible with my OS X 10.7.4. Even my iphone sees it but then crashes when it trys to do something with it.

It's an easy mistake to make, but AirPort Utility 5.6.1 will only run on Snow Leopard and Leopard machines.
If you want to use the previous version of AirPort Utility, you need to download and install AirPort Utility 5.6 for Mac OS X Lion
It might be a good idea to perform a Factory Default Reset on the Express and then start over to reconfigure the device. To do this....
Power off the Express for a few minutes
Hold in the reset button first and keep holding it in for an additional 9-10 seconds as you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow it 45 seconds or so to restart to a slow, blinking amber light
The Express provides a default wireless network with a name like Apple Network xxxxxx. Make sure that your computer is logged on to this network first....no password is required.....then open AirPort Utility and it will have a good chance to recognize the Express.

Airport Express doesn't work with password

Similar Messages

Maybe you are looking for