Airport Express error (-15006) when trying to connect as a remote speaker?

I use an Airport Express (g) to port music to my stereo.
Recently it stopped working and although the green light is on (ie connected) when I try and connect iTunes to it gives me the waiting bar and then error (-15006).
I've tried doing a 'hard' reset on the unit and reconfiguring it but no change.
Is it broken or is this a software/setup issue?
Thanks,
Dan.

After reading dozens of reports about this issue in this forum I found my solution and I want to thank everybody for their contribution. Here is what I did. I think this can help many of you that are having your airport not recognized by airport utility:
1- connect your aiport express to your computer with an ethernet cable
2- while mantaining your aiport express connected to your computer by this cable do a factory reset (see apple support to learn how to do this simple procedure)
3- at this time you will see a steady ambar light in your airport express
4- launch airport utility and wait 30-50 seconds
5- airport express should now appear with factory settings ready to be setup
If you have an Airport Extreme base station and want your airport express joining your network follow the above procedure and TURN ON airport in your Mac in order you can access your airport express through airport utility.
I hope this help you. My airport express (n) is working again with firmware 7.4.1 that many people claim to have a bug as is air tunes. My house is a 2 story building and this airport is on the top floor where te network could be problematic but it is not.
Regards,
Jose

Similar Messages

  • Getting error 789 when trying to connect with a PC remotely via VPN

    When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

    The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
    If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

  • Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

    Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    Check the proxy settings to make sure that they are correct.
    Contact your network administrator to make sure the proxy server is
    working.

    Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
    *http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

  • Communication error occurred when trying to connect to server

    I am using RAS SDK to connect to the BO server. While running the report for performing opendocument, it's giving the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
         at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
         at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
         at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
         ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0  completed: No
         at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
         at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
         ... 52 more
    Please help me to solve the issue

    Using BO SDK i am connecting to the BO Report Server, to fetch the BO Reports, But while trying to run the report, i am getting the following error.
    Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    detail:Communication error occurred when trying to connect to server PUNDL10492.WebIntelligenceProcessingServer
    The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:270)
    at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
    at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:110)
    ... 38 more
    Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM: minor code: 0x0 completed: No
    at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
    at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:338)
    ... 52 more
    Please someone help me with the following issue.

  • VISA Error -1073807194 When trying to connect to Dynamixel MX-28

    VISA Error -1073807194 When trying to connect to Dynamixel MX-28
    I'm trying to connect to a Dynamixel MX-28 and receive the above error when I run my VI.
    The COM ports detected by the VI match the ones that I see in Windows 7 Device Manager.
    Any other ideas?
    I've attached the code I'm running below.
    Attachments:
    Single MX-28 Position Control.vi ‏23 KB

    slow wrote:
    I had no idea, actually. I'm just learning Labview (and was handed this code by the previous guy). I appreciate the help.
    I'm guessing I need to replace the "VISA resource name" and "VISA resource name out" blocks (that are currently in the above linked VI) with the "VISA configure serial port" block?
    In a related question, what would be the best way to expand this so that a larger number of servos could be controlled at once?
    Would I just make multiple copies of the current blocks (with several position knobs on the front panel)? Would that make the most sense?
    LOL I was making fun of the unusual place that NI put the VISA serial config, not being sarcastic about you not finding it.  Sorry about that. 
    The config will go right before your write.  If you turn on context help (the little ? in the upper right corner) and mouse over the various things on the block diagram and front panel, you'll see how to use them. 
    Not really sure about a desing suggestion.  An array of position knobs to be indexed accordingly?
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • OSStatus error -6602, when trying to connect to time capsule

    OSStatus error -6602, when trying to connect to time capsule for back up.
    I am prompted for my
    How do I decode the error messages?

    The information from a Google search indicates the error is generated when connecting to a PC share. So this may be some kind of error generated by the NAS' operating system. In any event I cannot find such an error number associated with OS X so if it is an OS X error number then it's not publicly documented. I would still think Synology's tech support should be able to help you since it is their device. If they sent you here then they're passing the buck.

  • Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store

    Iphone 5 IOS6.0.1 Error appears when trying to connect to Itunes Store as Cannot connect to Itunes Store

    you are not alone! I get the same for weeks now and I got an itunes voucher for xmas!
    enjoy ecuador you lucky liucky barsteward, I have been to honduras/belize/mexico/guatemala/peru/bolivia/chili but ecuador is meant to be BRILLIANT
    so to recap obviously some glitch at apple!, sorry I couldn't help

  • TS1368 getting the error 0x80092013 when trying to connect to the store to buy music

    getting the error 0x80092013 when trying to connect to the store to buy music

    I can't dial:  (Get 'call denied' message)
    [email protected]
    [email protected]
    [email protected]
    Is there a way to know this is being addressed?  How would one start a support case on this subscription service?
    Although I subscribe for service for my SX20's and Bridge, my jabber video account is a free account.
    Update: At 1pm CT I am able to dial and connect.

  • TS1424 Getting error -1202 when trying to connect to My Wish List.  Says there was an error in the ITunes store and to try again later.  Any work arounds for this?  I have no other problems accessing anything else.

    Getting error -1202 when trying to connect to 'My Wish List" in ITurnes.  Says there was an error in the ITunes store and to try again later.  Have no other problems connecting or purchasing......

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen L*/Coo* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • TS1424 I keep getting error -1202 when trying to connect to itunes store, any idea how to fix this?

    I keep getting error -1202 when trying to connect to itunes store, any idea how to fix this?
    Thanks

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Error message when  trying to connect Classic 120GB to iTunes    An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

    When trying to connect to iTunes I get this message  
    An internal error occurred during: "FindSonarTrackJob".
    java.lang.NullPointerException

    I too am having this problem and have had, for about a week now.
    I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
    Really annoying.

  • Getting an error message when trying to connect to Telepresence Meeting - "Call Denied"

    I am getting an error when trying to connect to Telepresence units I have been using for quite some time. I tried multiple computers and multiple destinations. The error message "call denied" pops up within seconds after trying to connect.
    Any ideas? Is this a Cisco related issue?

    I can't dial:  (Get 'call denied' message)
    [email protected]
    [email protected]
    [email protected]
    Is there a way to know this is being addressed?  How would one start a support case on this subscription service?
    Although I subscribe for service for my SX20's and Bridge, my jabber video account is a free account.
    Update: At 1pm CT I am able to dial and connect.

  • Error message when trying to connect to iCloud?

    Hi. When trying to connect to my contacts/calendar in the Cloud I get the following error message:
    "Can't load contacts. There was a problem loading the application". I am not sure what to do. Any suggestions would be
    greatly appreciated. thank you in advance.

    Welcome to the Apple Community.
    Try the following.
    Go to Settings > iCloud > Delete Account (This removes your data from your device, but not from your account, it will be added back later).
    Restart the device.
    Sign in again (Settings > iCloud, don't use the 'Create New Apple ID' button).

  • I am trying to connect a 3rd airport express to my network, but am getting "an unexpected error occurred" when trying to connect.  Any ideas how to fix?

    I am getting, "an unexpected error occurred" during set up of a 3rd airport express.  Any ideas why or how to correct?

    Are you using the IMac in your profile, or are you using the iPhone or iPad to set up the Express?
    If you are using the iMac, what operating system is installed on the Mac?

  • Airport Express error 15006 after period of no use

    I have a network composed of a Time Capsule connected via ethernet to a Mac Mini running iTunes which broadcasts to three Airport Express stations. As long as I'm actively using it, I don't have any problems. When I come home from work, I can always count on an error 15006 in iTunes saying one of the Airport Express devices has disconnected. At this point, I have to stop and restart iTunes and everything is fine again. Since the Mac Mini is headless, running as a media server, this means pulling out my laptop and getting a remote desktop on the Mac Mini to restart iTunes - a daily ritual for months now.
    I see a lot of discussion in here about restarting AEs and flashing firmware and whatnot, but it seems to me that iTunes just doesn't handle this situation properly, an error dialog is unnecessary when it could apparently just rescan the network and repair itself as it does on startup. Is there some other fix for this scenario? iTunes developers, could you please handle this sort of error differently with a more proactive approach?

    John Galt wrote:
    What a pain!
    After the investment, and getting everything tuned in and working perfectly, having that outstanding issue was... quite painful to my psyche, yes
    If you have a suggestion you should direct it via:
    http://www.apple.com/feedback/
    I did that... no feedback, of course, but it sure does seem like the last iTunes update addressed it. The dialog is still left up, but it seems to rescan the airport express devices and make them available again, for instance, in the Remote application. Keeping my fingers crossed, but it's been awhile since I hauled out the remote desktop and restarted iTunes because of that error - it was a daily event.

Maybe you are looking for