Airport Express error 6753 and IPAD2 "interference"

Airport Express works fine with my pc(Vista) until my brother-in-law comes with his IPAD2 and connects. My pc will connect to the Express(wireless network), but won't go on the internet. Can't get the Airport Utility to communicate either: error 6753. When the IPAD2 leaves everything works fine again. Any ideas? Thanks

I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

Similar Messages

Airport Express error -6753

Trying to extend network with airport express and get error code-6753. What can I do to get it working?

I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

Airport Express, Lexmark x6690 and iPad2 printing issues

I have recently bought an Airport Express to take with me to university. I am wanting to use it to turn an Ethernet Connection to Wireless and to use my existing Lexmark x6690 printer. I set up the Airport Express using my iPad 2 and it seemed to go fine. When I tried to print a test Pages document it said that "No Airprint printers found". I deleted the software on my family's PC, and reset the Airport and tried again. The same result.
Is there anyway that I could get this printer to work to that I don't have to get a new printer? If I have to get a new printer, which one would be the easiest to set up with minimal expence and effort but also be cheap to buy and run?
(I would only be using the printer to print, not to scan or fax anything)

The Lexmark X6690 is not AirPrint compatible so you will not be able to print directly from your iPad. You can use our LexPrint App to print from your iPad but you'll need a host computer to act as a bridge. Just click on the link to know more: LexPrint App
Also, we have released a new line of printers that's compatible with AirPrint: Pro715, Pro915, S315, S415, S515, Pro4000 and Pro5500. Just go to www.Lexmark.com for more information.

Cant connect to the airport express - error -6753

Hi,
I saw similar messages already posted but without answers.
I also get this message occasionally while trying using the Airport Extreme Utility from a PC while when I try from the Mac it runs ok.
The Airport Extreme is allowing both to connect to intenet.
What is the meaning of that error?
How can I resolve it in order to use the PC To connect with it?
Thanks,
Giuseppe

i too am getting the same error message when trying to connect to my airport extreme via windows installed on my mac. so far haven't figured it out.

TC will not communicate with Airport Utility error -6753. Wireless, internet (unsecure), and backup work fine., ,

TC is not communicating with Airport Utility (error -6753). I do have a flashing amber light. The wireless (printer, TiVo), internet (unsecure), and backups to Time Capsule work fine. I have done many hard and soft Resets, but that has not helped. Airport utility show the TC as amber and but won't let me findout the status of what is causing the problem.

What mode is the TC running in, router or bridged? You can sometimes have issues if the TC is bridged and the network is getting IP in a different subnet.
I would recommend disconnecting the TC from the network and plugging it directly into the Mac via ethernet. You may also need to do a reset if the dhcp is off, as in bridge.
Also note are you pressing the reset for long enough that the led on front starts blinking rapidly.. hold it in for 15sec to be sure.

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
My computer is acting....well, strange. I can't put my finger on it but it doesn't seem right. Menus look skewed. Some applications look like they're trying to disguise themselves as apple (no consistant window formats). Airplay turns on and off on my devices on it's own. And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them.
I have changed my password many times but the issue keeps coming back. I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...)
Anyway, maybe I could have stemmed from an improper setup of my wireless network.
Any thoughts?
Also, right now, when I just signed into apple communities....
     I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
     It seems to have been working but...
     When I loged in here it only saw my:
                              OLD MacBookPro
                              3 Old iPods
                              My new MacMini with OS X Sever (Server is currently turned off)
     Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
     I doesn't even see my iPad (1st generation), or my iPhone 5
     Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
Can anyone perform an analysis on my account and computer? I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
PLEASE HELP!

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

Airport express error -15000. Any ideas on what causes this error?

I keep getting airport express error -15000 when I try to play a song from itunes to speakers set up throught the airport express.

Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes
http://support.apple.com/kb/TS2278

Airport Express Audio Drop and Network issue

I have a Dell Laptop, DLink G604T router and Airport Express. When I first bought the airport express I successfully got it to join my existing Dlink wireless network and I could happily stream music wirelessly to the airport express and maintain a wireless internet connection through the Dlink router.
Since then I started having issues with audio drops to the Airport express and despite doing a lot of searching on the discussion forums and internet and trying different things have never solved the issue.
The one thing that does seem to work is if I create a new wireless network with the Airport Express rather than joining the existing Dlink one. I can then stream music flawlessly all day long. The down side is I then can't get internet access wirelessly at the same time. I have to disconnect from one network and connect to the other.
If I connect the dlink router to the airport express by ethernet and use the Dlink router just as a modem I think the issue will be resolved but this is not convenient due to position of router and airport express.
So the question is, Can I get the Dlink router to join the Airport Express Wireless network wirlessly rather than the AE joining the Dlink wireless network? Any thoughts on whether this is possible and if so how?
Dell Inspiron 500m Windows XP Pro

I had one AE base unit, where network connection would disapear every other day. The light would still be green on the AE, but the signal from the AE could not be picked up nor seen by the computer. Only turning the AE off and back on, would make it appear and work again. I Changed the AE unit, and I dont have the problem any more. I didnt change any settings at all.
So in my case, it was the AE base unit that was malfunctioning.
I have also seen similar problems with a different cause: That the wifi network card in the computer wasnt connected properly. ..
I dont think its a software problem
good luck

Airport Express Base Station and AirTunes

I was given an Airport Express Base Station and I purchased
a PCMCIA wireless card (802.11g). After installation of both items I then upgraded the iTunes software to v4.9. I want to transmit music from my laptop to the Airport Express Base Station. I understand I require the AirTunes software butI cannot find a download site for that application. The CD that came with the Base Station does not have Airtunes (obviously an older version of the application software). Is AirTunes available as a download?
Thanks

Airtunes support is built in to iTunes version 4.9 - there is no other software you need to download or install. If your PC has been successfully set up to connect to the Airport Express wireless network, a drop down box will appear in the lower right corner of the iTunes application window where you can select the place your iTunes should be playing (ie internal speakers, or the Airport Express).
You did not mention either (a) configuring your Airport Express or (b) setting up your PC to connect to the Airport Express wireless network. To do this:
(a) read the configuration manual for the Airport Express. Then download the Airport 4.2 update for Windows (from Apple's web site) - it provides the latest Windows versions of the Airport Express configuration software.
(b) to get your PC to connect to the Airport Express wireless network, see the links to "accessing an airport network" provided at:
http://www.efelix.co.uk/tech/windowsxp.html

The green light in my airport express started blinking and doesnt stop and I cannot find it anymore

the green light in my airport express started blinking and doesnt stop and I cannot find it anymore

Unfortunately, green blinking is usually a symptom of an internal electrical problem on the AirPort Express.
Try a Factory Default Reset as a last resort:
Power down the Express
Wait ai few minutes
Hold in the reset button first, and keep holding it in for an additional 9-10 seconds while you simultaneously plug it back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart.
You want to see a slow blinking amber light at this point, indicating that the Express has been reset to factory defaults. You can reconfigure it again now.
If you try the Factory Default Reset a few times and this does not help, I am afraid that the Express is defective and will need to be replaced.

Problem with Airport Express (1st gen) and Mavericks?

Hello,
I still have an older 1st gen Airport Express (model A1264) and now with Mavericks it isn't working at all. The Airport Utility app on my Mac can't even find or connect with it. The same with the iOS app. It worked fine before. I can't even update the firmware (either no download available or other available downloads are too old and won't install). Is there a solution or do I need to update my whole device?
Thanks,
Paul

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Error - 6753 and 10057 when trying to setup airport express in XP

I keep having this problem when i try and use my airport express. My PC can pick up the airport but when i try and click manual setup or continue i get error -6753 or 10057.
Please can someone help me out with a step by step procedure to set an express up with Windows XP

Unfortunately, things like this can happen when you try to use current software on a 6 year old product.
The solution is exactly as the message states:
You will need to use AirPort Utility 5.6 to update the firmware on the AirPort Extreme.
AirPort Utility 5.6 can be installed on a Mac running Leopard (10.5.x) or Snow Leopard (10.6.x) or a PC. If you do not have access to one of these devices, you might be able to take the AirPort Extreme to an Apple Store to have them update the firmware for you.
Once the firmware on the AirPort Extreme has been updated......then..... it will be possible to administer the AirPort Extreme using AirPort Utility 6.3.1.

Airport Express error 6753 and IPAD2 "interference"

Similar Messages

Maybe you are looking for