Airport express ethernet troubleshooting with Belkin Powerline HD

Dear All,
Equipment:
x3 Airport Express stations (G generation not N)
x3 Belkin Powerline HD (up to 1000mbit)
x1 iMac plugged (connected via ethernet)
I have three airport express devices around my house in order to play music in those rooms from itunes.
The Expresses never worked well wirelessly so I decided to buy Belkin Powerline hd devices that create ethernet bridges between my router and the three Airport express devices through the mains supply.
i. The lights go green when I plug in the ethernet cable on the Airport Expresses
ii. The Belkin Powerline hd boxes have the solid blue light indicating excellent connection
iii. The Airport expresses are set on "ethernet"
but the *airport express devices do not come up on my itunes and not in Airport Utility* on my iMac.
I have tried the following:
i. Unplugging one of the airport express devices from the Belkin Powerline hd and plugging my laptop in to the ethernet - and the internet works - so there is a connection between the Belkin Powerline hd devices.
ii. I have tried resetting the Airport expresses, giving them fixed ip addresses.
iii. I have used a regular ethernet between the airport express and my laptop and it registers perfectly.
iv. Tried putting all three Belkin Powerline hd mains devices in mains sockets in the same room.. but still doesn't pick up the airport expresses.
So it's highly confusing... internet works across the Belkin Powerline hd mains devices, the airport express lights come up green - but the airport expresses do not register in itunes or Airport utility. (for accuracy - it does come up for a few minutes when plugged in then disappears).
Please help... Belkin are just as perplexed as I am on this.
Thanks

Running into the same exact problem with the belkin hd power adapters.
I have an apple tv connected via wired LAN direct to the router that is at the modem. (all in the tv cabinet).
The PC with iTunes is in the office across the house. Previously i was using wireless t connect the PC back to the router.
In an effort to improve the performance, I got the Belkin hd power line adapter starter kit earlier today because of the 1Gbps throughput.
The units connected quickly, and I was able to notice a significant difference on web browsing immediately. However, I could not get the apple tv to see the computer any longer.
After a couple of hours of checking firewall settings on my PC, checking itunes settings and ports, turning off home sharing and restarting it, as well as PC reboots, I was still unable to connect to the PC from the apple tv. I could ping the router from the PC and even ping the apple tv from the PC, but the apple tv and iTunes were still not seeing each other. yes - iTunes was open on the PC when I was trying to connect from the apple tv.
With everything still the same, I disabled the LAN and stuck the USB wireless dongle back in the PC. Once it connected, and I closed and reopened iTunes once more (for good measure) and immediately the apple tv was detected.
So.....there is something blocked on the belkin power line adapter.
Now I am hunting to see if there is a web interface for the belkin adapters that I could tweak in order to resolve this. If not, they are going back to best buy.

Similar Messages

  • AirPort Express NOT working with Belkin N1 Vision (Model : F5D8232-4)

    I cannot manage to make it work properly....
    I've followed the instructions to set up the network. My Mac can detect my AirPort Express (APE) and an IP has been distributed successfully. And the solid green light was shown after setting up. However, the AirTune cannot detect my APE in iTunes...
    Any solution for that? Please suggest. Thanks!

    Norman,
    There could be a couple of issues, if you could provide more information about the settings you have chosen that might help. However if your AE is new call Apple they can assist you on setting it up.
    I also use a Belkin router and found initially my security was set at 128 bit WEP which the AE had a tough time with. Once I reset the security to WPA/WPA2-Personal(PSK) things went much smoother. You will probably have to do a reset of your AE by plugging it in, using a pen or paperclip hold in the reset button until the light starts blinking rapidly and then take out the pen/clip. Once you have done that start over on the installation process.
    Another possibility is if there are multiple wireless networks in your vicinity you can get interference if they are all competing for the same channel. There is a free application called iStumbler (just Google it) that will look for all the WiFi networks in your area and let you know the channel they are on. If you find several all using the same channel then simple go into your Belkin's settings and change the channel to one not being used. I ran into this problem too, I live in a Condo with 5-6 WiFi Lans all within a close proximity.

  • Airplay won't connect to my Airport Express & is intermittent with Airport Utility

    Hi
    Yesterday, my iTunes 10 stopped connecting via Airplay to my Airport Express. It spent a long time displaying a Connecting message, then finally gave me this error message: "An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
    I have a Macbook Pro 2.5 Ghz Intel Core i5 (6 months old). 4 GB 1600 MHz DDR3.
    Running OS X 10.7.5.
    My main modem/router is a Livebox and I usually going my Airport Express to the Livebox network to play music.
    My Airport Express is 802.11g
    All my equipment is within a radius of 2 or 3 feet.
    I'm aware of at least one other recent thread about this problem (https://discussions.apple.com/thread/4150757?tstart=0), but none of the solutions suggested have resolved my problem, so I have summarized a list of the actions I have so far taken to try and resolve the problem. Hopefully, this will help others sort this issue out for themselves.
    ACTIONS TO SOLVE ISSUE
    1. Ran Airport Utility 6.1, which was unable to find my AX.
    2. Downloaded, installed & ran Airport Utility 5.6. AU 5.6 still couldn't find my AX, giving me this error message:
    "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    3. Unplugged the AX and did a hard reset. AU found my AX and I configured it to join my Livebox network. After being configured, the green light came on the AX, which also appeared on the AU list of devices. However, AU still had the message "Waiting for Airport Express to reset…" with a spinning ball for several minutes. So, I closed the AU window (as AU advised), and reopened it. Happily, the AX was still listed.
    4. Reopened iTunes and tried to select my AX as speaker output. At that exact moment, the AX vanished from the AU list of devices and, after the long wait, iTunes gave me the same error message as before:
    "An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
    When I tried to rescan for devices in AU, I got the same error message:
    "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
    5. Hard reset and configuration of AX. This time I didn't close the AU window, I waited for the AX to reset. When the spinning ball finally vanished, I got this error message:
    "An error occurred while reading the configuration. Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
    6. Apple help pages suggested updating the AX firmware. I downloaded the firmware update, did the AX hard reset/configuration routine, then tried to run the firmware installer and got this error message:
    "An error occurred while attempting to communicate with the AirPort Express. (-8)"
    7. Ran all the software updates, including upgrading to iTunes 11.
    8. Spent over 5 hours doing many many hard resets of the AX, combined with iTunes restarts, MBP restarts etc. Along the way, I discovered that if I hard reset  & configured the AX, after a few minutes, AX would disappear from the AU device list without me doing anything.
    9. Attempted to change IPv6 options, using following methods:
    a. System Preferences -> Network -> Advanced -> TCP/IP ->   IPv6 _> Link-local only
    b. In Terminal.
    networksetup -listallnetworkservices
    networksetup -setv6off Wi-Fi
    Neither method had any effect on the ability of AU to see my AX.
    Phew! I'm now exhausted & rather demoralised. Anyone got any other ideas?

    I have been dealing with this for days now. I'm not sure what the solution is either, I've spent most of my vacation from work attempting to get it to work with my speakers and printer, none work still!!
    It seems like a lot of ppl are dealing with these errors but there isn't one solid solution out there.
    Try to set the AX wirless setting to "off" and only have it work for Airplay, Does it work for you?
    One last thing, could this be an update problem? As in, you update your firmware/software and it renders the AX obselte. My AX is old probably a little older than 4-5 years, what about your?
    I would really like to get this to work as I do not think I need a new AX to make this work.
    Let me know your thoughts.
    B.

  • HT204371 airport express Ethernet port isn't working

    why isn't my airport express ethernet port not working????

    We will need more information than this.
    What generation of Express is it? What OS are you using? Have you tried with multiple cables?

  • Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

    Community:
    How do you set up an
    Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
    Please advise
    Fmsalazar

    Apple did say it was important.
    If the units do not show up in the airport utility then you must set it correctly to link-local.
    Steps for OS X Lion or Mountain Lion
    This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
    Choose Apple menu () > System Preferences, and then click Network.
    If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
    Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
    Click the TCP/IP tab.
    Choose Link-local only from the Configure IPv6 pop-up menu.
    Click OK.
    Click Apply.
    AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
    Apple rep says the same.
    Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
    I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
    It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

  • Will airport express be compatable with windows vista

    will airport express be compatable with windows vista

    vista will not be compatable because I do not have the capability in vista to download AirPort Utility 5.6.1 for Windows, which is a requirement for the ethernet connection to the Airport Express.  Is that correct?
    No, sorry for the confusion.
    You would need 5.6.1 on the PC only if you intend to use that to initially setup and configure the Express.  I understand that you will be using the Mac to setup the Express, correct?
    5.6.1 is not needed if all the Vista machine will be doing is connecting using Ethernet or wireless to the network. You don't have to install anything on the Vista machine if all it will be doing is connecting to the Express.

  • HT4587 I downloaded Airport Express Utility 5.6 to get my Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility.

    I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?

    It is likely that you downloaded AirPort Utility 5.6.1.  If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
    You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion

  • Can't Get Airport Express To Work With ATT's Uverse

    For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
    There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
    I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
    No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
    Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
    Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
    Thanks!
    Message was edited by: Chris Winkler1

    +However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
    AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
    +And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
    This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
    +Has anyone out there successfully got their Airport Express to work with Uverse????+
    I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
    But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
    AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
    AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
    +What password goes in the Base station tab, Key or Password?+
    Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
    Please post back on your progress.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • Airport Express - Ethernet jack

    Hi
    Does anyone know if the airport express' ethernet port outputs to devices as well as receives.
    Ideally I need to convert my current 802.11n time capsule signal back to a ethernet device (a AV component) that does not have wifi capability.
    Is this possible? Could I connect my airport express near the device and connect them up using ethernet - would this connect my device (via ethernet) to my internet signal?
    Thanks

    If you have the 802.11g AirPort Express (AX), you will need to configure the AX and Time Capsule to wirelessly connect using WDS. In this mode the AX's Ethernet port will be active.
    If you have the brand new 802.11n AX you can either use the new 802.11n "extend network" feature OR WDS to wirelessly connect the two.

  • Airport express not working with apple products

    We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet! 
    We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
    Currently the only thing that will connecy is the laptop and my htc phone.  All the apple products will not connect? 
    We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
    The network comes up on ipad2 but when you press connect it says 'unable to connect'
    can anyone help us please?
    thank you

    I have the same issue.  Mine fixed itself for a bit and now it's broken again.  I'm thinking it's going to be intermittently broken.  I've tried turning both devices off and on again but that did not help.

  • I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    Hello Hornet12,
    Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
    Using AirPlay
    http://support.apple.com/kb/HT4437
    AirPlay requirements and capabilities
    To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
    Stream content from
    Requirement
    Notes
    iPad
    iOS 4.3 or later.1
    From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
    With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
    iPhone (3GS or later)
    iPod touch
    (2nd generation or later)
    Computer
    iTunes 10.2 or later.
    Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
    Apple TV
    Apple TV software version 5.1 or later.
    Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
    Cheers,
    Allen

  • HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

    what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

    You can find out as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the AirPort Express
    Click Manual Setup
    Click directly on the word Version (3rd line)
    If there are any updates, you will be notified.
    If there are not any updates, you have already have the latest firmware.

  • AirPort Express Base Station with AirTunes, is it worth it?

    I am about to buy a MacBook and get a wireless capable printer and I'm wondering if it's worth buying the AirPort Express Base Station with AirTunes. Does it improve internet connectivity? I have a Cable modem will the Mac pick up the connection automatically?
    thanks!

    Hi liquid_garnet,
    welcome to macbook forum.
    First check your wirelesss printer that you want to buy, and make sure they have intel mac driver for it in the box or on their sites.
    And check your cable modem, see if the modem is capable with wireless networking (usually if the box has antenna, it should be wifi capable), if it does, why bother to buy another wireless access point?
    If you really need wireless access point, I suggest you consider a wireless router hub, so you can connect up to 4 computer wired and not to mention the wireless capability too, rather than airport express with iTunes that only can act as wireless access point and cannot act as a hub.
    Good Luck.

  • I am currently using the Airport Express to work with a Bose Wave radio.  3.5 MM jack out and phono connectors into Bose.  Is there a way to hook to a new Bose Wave which does not have phono input plugs?

    I am currently using the Airport Express to work with a Bose Wave radio.  3.5 MM jack out of the Express and phono connectors into Bose.  Is there a way to hook to a new Bose Wave which does not have phono input plugs?

    The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
    An example cable would be located here.

Maybe you are looking for