Airport Express external harddrive not shown

Hey
I tried to connect my external harddrive to the apple airport express (Version 7.5.2). I already reformat the harddrive to FAT32. But still my Airport Utility programm doesn´t show it. It not even shows any drive in the pull-down menu.
Google couldn´t help me.
Any ideas how to connect to the harddrive?
Antworten gerne auch auf Deutsch.
Thanks!

The Airport Express only supports Printers... unless the apple website is telling porkys. I have got one of these on order (arriving soon, hopefully), having a external h/disk would be sweet for this product.
I did come across this external forum conversation: http://forums.macrumors.com/showthread.php?t=472993

Similar Messages

  • Airport express green but not showing up in airport utlitity nor airtunes

    Hi,
    I'm  trying to troubleshoot a problem for my parents. They have a westell dsl modem wireless access point in their office. To give them better reception in the rest of the house I hooked up an old airport express I had lying around. It works fine and has extended the network perfectly  (green light etc.) BUUUTTT why does neither the airport utility nor an ipad, nor itunes "see" the speakers or the even the express ?
    What am I missing?
    I wouldn't have to have an all apple networking? I seem to remember that i have used the express at hotels and it showed up no problems...
    Thanks,
    Philly
    Airport Express is one of the first ones. Computers running lion and mountain lion. iDevices on the latest 5.X

    Hi Carolyn
    Thanks for your reply. I'm running 10.6.4.
    Unfortunately - no luck with that solution. The Kitchen Airport Express also does not show up in the air tunes on my Apple TV.
    I have had no problems with getting airport expresses to show up in air tunes before adding this Dlink to my set up - I think it is something to do with the fact that the DLink is plugged into my Airport extreme. (I have tried DHCP off and on).
    Thanks

  • Can I strem audio to my airport express? but not only iTunes

    Can I stream audio to my airport express? but not only iTunes. where can I suggest to Apple make some about it?

    Hello keer. Welcome to the Apple Discussions!
    Can I stream audio to my airport express? but not only iTunes.
    Yes. To stream audio, other than from an iTunes source, to an AirPort Express Base Station (AX) you will need a third-party product, like Rogue Amoeba's Airfoil.
    where can I suggest to Apple make some about it?
    You can submit suggestions to Apple at the following link: Apple Product Feedback

  • HT4259 Q: Can I use an older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, are the instructions the same as for adding an Airport Express-n router?

    Q: Can I use my older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, Are the instructions the same as for adding an Airport Express-n router?

    If you want to extend, using wireless only, the 802.11g Express doesn't support this.
    However, if you want to use bridge mode over Ethernet or Powerline adapters then this is supported.

  • External-graphic not shown in PDF with Tomcat / Cocoon / Ubuntu

    Hi,
    this weekend I set up a virtualbox with Ubuntu 8.04 OS; APEX 3.12 @ Oracle 10gXE; Tomcat 6.014; Cocoon 2.1.11; fop_post sitemap file according to Carl Backstrom blogpost ([http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html]); to experiment with APEX & PDF printing.
    Tomcat is configured to listen to port 8888; APEX to 8080.
    I have setup APEX according to Carl's blogpost. All is working fine; I can generate PDF reports using the standard templates. I'm new to XSL, but decided to go wild. I decided to include a JPG graphic.
    I followed the example in Scott & Spendolini, Pro Oracle Application Express, page 399. However the image is not shown in the PDF, nor is there an error message produced. What is wrong?
    This is the relevant section of source code I have used:
    <fo:static-content flow-name="region-footer">
    <fo:block xsl:use-attribute-sets="text footer">
    <fo:inline xsl:use-attribute-sets="body-font page-number">
    <fo:external-graphics width="50px" height="50px" src='url("http://www.fiat128.nl/images/fiat128.jpg")'/>
    <fo:page-number/>
    </fo:inline>
    </fo:block>
    <fo:block xsl:use-attribute-sets="text text_2 #PAGE_FOOTER_ALIGNMENT#">
    <fo:inline xsl:use-attribute-sets="page-footer">#PAGE_FOOTER#</fo:inline>
    </fo:block>
    </fo:static-content>
    all help is appreciated. Is there a problem with Cocoon and Linux?
    many regards,
    Ronald van Dijk
    Edited by: user614694 on Oct 6, 2008 3:09 AM
    Edited by: Ronald van Dijk on Oct 6, 2008 3:10 AM

    Hello Ronald,
    Your code looks fine to me. Although xsl-fo is not very friendly for a slight change...
    This is an example I use during my PDF printing presentation:
    <fo:static-content flow-name="region-header">
    <fo:block xsl:use-attribute-sets="text text_2 text_0 #PAGE_HEADER_ALIGNMENT#">
    <fo:inline xsl:use-attribute-sets="page-header">#PAGE_HEADER#</fo:inline>
    </fo:block>
    <fo:block border="0.5pt solid silver"
    background-image="url('http://o11g1.apex-evangelists.com:7779/i/htmldb/apex_logo.gif')"
    padding="12pt"
    text-align="center">Apex Evangelists
    </fo:block>
    </fo:static-content>
    Does that work for you?
    (change o11g1.apex-evangelists.com:7779 to your hostname:port - and see that you get the image by using the url)
    I've sometimes seen problems displaying certain pictures or specifying the width.
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

  • External Harddrive not recognised on GX740

    Hi,
    Recently my External HD "wesern digital My Book Studio Edition II" does not come up in my GX740 notebook.
    I have tried all usb connections.
    As far as I understand the HD uses windows-drivers, (not from cd)
    The Harddrive works fine on my other computer.
    Does anyone have suggestions what I should do/try to fix?
    Do you think it is a Hardware thing "maybe reinstall usb drivers"
    or maybe a Windows issue??
    Help is appreciated.
    Regards   
    Gunde

    Thank you for the answer.
    Unfortunately the disk is not shown in "ctrl panel / Administrator tools / disk management" so I have nothing to partition, it cant find the disk.
    Also the disk pop up directly when i plug it into my other notebook.
    The computer does make that familiar sound when you plug in a new device in an USB port (on the MSI computer) but maybe that is just the computer recognising that something is plugged in to the usb-port.
    Hopefully somebody can help
    /Gunde

  • Airport Express, External HDD & Time Machine

    Hi Guys,
    Sorry if this has been answered before but I have tried to search for the answer and can't find one.
    I am toying with buying a Time Capsule for my backups but it was suggested to me that an Airport Express with an external HDD attached to it will work with Time Machine....Is this the case.
    Not only will this save me money but there is much feedback about the TIME CAPSULE overheating after 18 months...thats a lot of money every 18 months.
    Many Thanks

    copperrick wrote:
    the link you left was very helpful, slightly annoying that it was an Apple Store Employee that recommended using an external HDD attached to an extreme after all they are meant to be the GENIUSES lol.
    PLEASE call the store, or ask for the manager if you go back. Calmly but firmly ask them to inform their personnel. (They don't get a lot of training on Time Machine, and don't actually use it in the stores.)
    Refer them to these Apple articles:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
    http://support.apple.com/kb/HT2038

  • Airport Express + External HD + Apple TV

    I have an Airport Express and an Apple TV and I was thinking about getting an external hard drive to plug into the USB port of the Airport Express so I can stream movies to my Apple TV...the only thing is I am not exactly sure how to do this. I plan on backing up/burning my DVD's using handbrake and then putting them on the HD. Is there a thread that can give me some guidance?

    I have an Airport Express and an Apple TV and I was thinking about getting an external hard drive to plug into the USB port of the Airport Express so I can stream movies to my Apple TV...the only thing is I am not exactly sure how to do this.
    Sorry, but you won't be able to do this as the AirPort Express Base Station's (AX) USB port only supports printers, not hard drives.

  • 1st generation airport express base station not showing up in network utilities

    when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with  my new mac?

    Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
    When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
    Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    Perform a "factory default" reset on the base station.

  • Can somebody please please help me! External harddrive not readable due to dumb mistake!

    What is quite possibly one of the dumbest decisions i ever made in my life, I disconnected my external harddrive from my imac & plugged it into a laptop that has Windows 7 to trasfer footage from there to my imac more quicker. I clciked an option that allowed me to assign a letter to it to it can be read by the laptop (however, I would of needed to format the harddrive which I thankfully didn't). Please understand that erasing the entire harddrive is NOT an option! I am a filmmaker & I have so many years of work on there, including videos, music, & documents.
    When the computer starts up I get hit with "The disk you inserted was not readable by this computer"! I tried Disk Utiity & even though it recognizes the drive's existence, I cannot repair or mount...nor can I access any of the files! I also tried Diskwarrior & got "directory cannot be rebuilt, the file system is unsupported".
    If theres anything you guys can do to help me, please do so. My life was on that harddrive & losing it would be the most devistating thing I could ever experience. A movie I finished not too long ago...is also on that harddrive. I'll send you a full video completely thanking you for your help!

    Call a professional data recovery service such as DriveSavers. Their services are very expensive, but without backups, you have no choice but to pay whatever they ask.

  • AirTunes / Airport Express / Windows XP not working together

    Here's the issue. I have two PCs available to me; a laptop from work that is tightly locked down by our paranoid IT dept, and a family desktop that has the iTunes library within it. I purchased airport express so that I could stream to my stereo. The laptop does not have iTunes on it, the IT dept having cunningly deployed some way of blocking its install. They did not, however, block airport utility.
    Both computers connect happily over wireless to Verizon FiOs and on into the wider world.
    1) The laptop's airport utility will happily locate and allow configuration of the express unit.
    2) The desktop unit, however, does not find the airport express at all finding no apple wireless devices. However, knowing from the laptop (and from direct to the fios router's network map utility) I can tell airport utility to "configure other" supplying the express' IP address and p/w. Then it finds it and can configure away until I hit the update button. It then can find it no longer until I configure other again.
    The point is, iTunes / air Tunes, hosted on the same desktop, displays, I suspect, similar behavior. It never finds the "speakers".
    I have tried switching off Norton's firewall altogether, the windows firewall altogether, going w/o any WEP or WPA without luck. Also, I have tried configuring the unit as first as a "joining an existing wireless network", and, second, as it own new wireless network again without avail.
    I have spent 4 hrs with Apple support and we thought we had it licked; the speakers appeared briefly after switching to a "bridge" connection share mode. The speakers duly showed up. Letting the gentleman go off the phone in triumph, I stupidly neglected to test the connection from iTunes through to the amp and ran into the error code 15000. Trying some of the ideas in these and other forums to beat that then led me back to square one, never seeing the much anticipated speakers again.
    Any ideas out there?
    Thanks much!

    I detected a problem with Airport+iTunes in Vista and some XP machines.
    I have 3 machines: Lenovo 3000 N200 Vista, Compaq nx9010 XP and Asus EEE Top XP.
    On the Compaq, APutil and iTunes perform flawlessly 100% of the time. However, on the Lenovo and the Asus, ApUtil doesn´t detect my 2 Airport Express, and iTunes will drop the connection after 30-60 minutes. Then I have to restart iTunes in order that it "sees" my Airports again.
    At first, I thought it was a problem with Vista. Later, as it happened on my Asus XP, I thought it was a hardware/driver compatibility problem. Then I decided to make some experiments.......
    I found that at startup, 2 processes are activated: iTuneshelper and APAgent.
    I cancelled both of them. Voila ! Suddenly APUtil detects my Airports, and no more dropped connections in iTunes !!!!!
    Now, it remains still unanswered to me: Why did the problem not happen on my Compaq ???

  • Old Library on External Harddrive not recognised on new PC for iTunes

    Hi, I've just bought a new pc after my old one gave up one me. I have my iTunes library saved to an external harddrive and I've changed the Library name to that of my harddrive location in Prefences>General>Library Name. I also changed The Preferences Advanced tab>iTunes Music folder location to point to the external harddrive location where my music files are and no music appears in my library. All I want is my library off my ipod to be replicated back into the itunes library as i've a lot of history here. Can it be done?

    MACROSTATE wrote:
    I have all of my iTunes media on an external HD that I access wirelessly. Been running it like this for a long time off my MacBook Pro without a problem.
    Yesterday I got a new iMac and followed the steps to connect my new iMac's iTunes to the remote library. When I go to Prefs > Advanced > Change iTunes Media Folder Location, I can see the folder with my iTunes content, but the content does not show up in iTunes after I select the folder.
    on the iMac, launch iTunes with the options key pressed. this window will appear
    select choose and navigate to the iTunes library file on your external HD.
    any joy ?

  • External disk not shown in finder or diskutil

    When I connect an external harddrive to my Macbookpro it does not show on Finder, Diskutil (but the hdd disk starts). USB works fine. If I plug in FW when computer is shut down or sleep it works fine. Cant find out why. Tried with different cables and disks.

    You could run a Apple Hardware Test but I think the solution will be determined at a genius bar session.  I would suggest you make an appointment.
    Ciao.

  • External harddrive not show correct files

    thanks for your time.
       i've not had this problem before.  i have an external harddrive and lately some of the files have been incorrect.  and now it's been happening to most of the files on the drive.  for example if i click on a video file a different video will show.  it's usually on of about 3 videos, so if i click on 30 different video files, the same wrong movie will show up about 25 times.  other videos won't open at all.  the same for a lot of pictures on the drive and other types of files.
        the drive is probably suffering from some kind of corruption, but i'm not sure if the part of the drive that points to a file is corrupted and can be repaired maybe.  i've ran disk utility and it says the drive is fine.  has anyone else had this issue and come to a conclusion short of running a recovery program?
    thanks.

    HI sorry thats what I ment. The disk utility(application) in the folder utilities. The strange thing is that Yesterday the hard drive did apear there. I thought maybe it has something to do with NTFS application. As before I had installed this I could only read but notwrite to files on the hard disks. So I uninstalled and reinstalled the software,,,,,now the hard disk does not appear anymore in disk utilities .....I'm getting futher away from an solution .... :-( what can this be ? ever heard of an problem like this ?  I thank you in advance for taking your time to look into this problem.
    Regards,
    Terrence
    see both screeshot. Only the usb stick appears. and see preferences also

  • Exporting to external harddrive "not enough disk space"

    imac   Mac OS X (10.3.9)  
    I'm having several problems while trying to export my entire iphoto library as a backup to an external harddrive...
    The main on is I am getting a "not enough disk space error". There is 95 GB available on the harddrive and the library is approximately 20 GB.
    I've been doing it in smaller increments b/c I thought it might be an issue of not enough space on my mac's harddrive as I only have like 6GB left (the reason I'm backing up and deletiing photos) but it gets to a certain point and then says no more.
    I've been using the export function, but I've also tried just dragging and dropping them and get the same error.
    I'm runnning iphoto 4.0.3.
    Of course I've tried restarting to no avail...
    Any suggestions would be welcome...
    Another issue is the filenames. Of course many have the same names from the camera. Is there a way to get them to automatically put them in folders on the harddrive. I've been doing this manually and it's tiresome.
    Finally, is there a way to get it keep the "date created" information. When I look on the harddrive it says they were all created 12/31/1903! That's going to make it very difficult to find something later should I need it...
    Thanx so much!
    JT

    < The library is like 30 GB while the pictures are only 20GB.>
    If you have rotated, cropped, or edited any pictures in iPhoto, the originals are all kept inside the iPlibrary in case you want to "revert to the originals"... it's good to know it's there, but you are less likely to revert to an original, since there's a reason you edited the pics in the first place.
    Anyway, those originals are taking "wasted space" in your iPlibrary.
    If you want to reduce the size of the iPlibrary from 30GB to close to 20GB, (because the thumbnails will remains and must), then you should get rid of the superfluous duplicates! I did.
    if you want to clean you iPlibrary and get rid of duplicates, you can use iPhoto diet. Free download.
    My advice, is do a drop and copy the entire iPlibrary to the external, as suggested by eww, because imagine a day, when the internal HD iPLibrary crashes on you, and becomes not salvageable, you will have a mirror copy, to copy back to your internal drive, with all it's albums, names, favorites ,star ratings etc....... If you export to the external HD, and if your iP library crashes on you.... you are to re-import from scratch.... and you will go %#%^&$&@$$@#
    I have been there myself... now I have 3 differents external HD that I back up to. 9 different iPlibraries, and 3 copies of each on 3 separate HD..... Photos are too important to me.....
    Reading this discussion group, you see many people writting thing such as "my library is gone what do I do?"
    it's not a matter of if but when!
    You be the judge...
    Michel

Maybe you are looking for

  • Reference a Derived table in another Derived Table

    Is it possible to reference a derived table from another derived table? I am using Business Object XI 3.0.

  • OCCI Only for MS Visual C++ 6.0 ?

    I found that the oraocci9.dll is linked with MSVCPR60.DLL. So that when I use MS Visual Studio .NET (7.0), it conflic with MSVCPR70.DLL because there are some differents between two version of that library. Have you have any version of OCCI that inde

  • How to fix Windows update after refresh?

    ENVY dv7, Windows 8. After refreshing Windows, Windows update is stuck at 0%

  • Is there life after death? It won't boot!

    Hi guys and gals,  A tech said my lap-top is dead.  But could it be resuscitated? It is an M65 S9092 four years old and looking new.  It worked fine one night but would not start the next day.  Pressing the power button has it try to start-up for onl

  • Why do I have problems logging in to this site

    I have problems logging into these forums alot of the time. Its not my browser because i've tried on both IE and Firefox and it's not my machine because I use 2 seperate machine, one on a network and the other on dial-up. When I click the login link