Airport express fried? It has a smell and no light

I noticed in my network that the airport extreme was blinking yellow. It was still working, but when I went downstairs to look at the Airport Express that is part of the WDS network, the green light was off and it was smelling like burnt electronics.
In the airport utility, the message was:
"This Apple device is set up as part of a WDS network but no other Apple wireless devices were found"
Tom

Fried is correct. Mine did the same 18 months ago. Apple weren't interested even though it was only 2 months out of warranty. 'It's a throw away item' - Easy to say when it's not their $130.
Finally bought a new one last month and now I have constant audio drop out.
Starting to get disillusioned with this product and I think I will go and get my money back.
Sorry to be not very helpful...

Similar Messages

The connection to our airport express says it has time out and lost connection?

the connecton to airport express say it has timed out and lost connection. can not hear music from airport express speakers. only the computer

What is your overall network configuration with the AirPort Express? That is, is the Express configured to join a wireless network provided by another router or is it your main router? If it is joining another router, what is the make & model of this router? Which model of the Express do you have? Finally, if you have another router, where is the Express located related to this router? Same room, different room, different floor?

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? An unknown error (-15006) occurred while connecting to the AirPlay device "John Knox's AirPort Express".

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? "An unknown error (-15006) occurred while connecting to the AirPlay device “John Knox's AirPort Express”.

No more need for an answer... the problem has been solved!

Airport Express Not Working with iMac G4 and HP laptop

Ok I am really frustrated with this. I had my Airport Express configured to my mac and my old roommate's mac fine. I moved and just tried setting it up with my mac and my new roommate's PC laptop. It did not work. I tried connecting a router to see if that would help. It still didn't work. I reset the airport's default settings and it still didn't work. Is there a connectivity issue between macs and pcs using the airport express that I don't know about? Am I missing something? Can anyone give me some suggestions of what to try next because I am seriously fed up and running out of ideas of how to alleviate this.
Could it have anything to do with a firewall on the pc or the fact that I'm going from a place that supplied me cable internet to a place that now has dsl?
Thanks for any help.
Aaron

Macs and PCs work together just fine with an Airport Express.
Unfortunately, you have given us little information to help you with beyond simply indicating that "it doesn't work". Please elaborate:
1. do the Mac and PC "see" the Airport Express wireless network?
2. if so, does the Airport Utility (or Airport Admin Utility) on either computer "see" the Airport Express and allow you to view/change its configuration?
3. what does the status light on the Airport Express show?
4. if you can connect to the Airport Express wireless network from the PC and/or Mac, is the only problem that you cannot access the internet?
5. what kind of reset did you do? To really start from scratch, do a factory default reset as described here.

Airport Express with wireless Powerbook, wired PC, and multi printer

I have a Linksys wireless hub which is plugged into my old pc (running xp home)and wirelessly connected to my powerbook (1.67 G4). I also have an Airport Express which I have not yet used. I would like to use both my PC and laptop with this printer, using this same configuration, and I am wondering if I can use my Airport Express to do this.
Any help is greatly appreciated.
Powerbook G4 1.67 Mac OS X (10.4.9) Old PC- XP upgrade (slow)

01-74, Welcome to the discussion area!
Since the AirPort Express (AX) only has a single Ethernet port, it can not connect to the Internet AND support wired clients. Therefore the AX would not be able to replace your Linksys.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
CB

AirPort Express Base Station signal drops on and off

My Airport Express Base Station signal drops on and off about every 2 minutes. It’s quite frustrating. I currently have a Windows XP PC, with a Linksys Wireless Router. I’ve taken several steps as prescribed in the support chats to no avail. I’ve switched channels, updated software/firmware (iTunes, Base Station and my Router), reconfigured my security settings to no security back to my regular security settings, I’ve placed the base station right next to my router in case it was due to interference, I’ve used headphones in the event it was my stereo, I’ve changed different utility settings (interference robustness, stream size, etc). I’ve opted to use the option “Create a Wireless Network” versus “Existing Wireless Network” and back to “Existing Wireless Network”. Again, all to no avail. Can someone offer some insight to help solve this problem? The problem is so annoying that I no longer use the base station.
Thanks in advance,
Rene
AirPort Express Base Station Windows XP

Maybe Windows is trying to get an 802.1x authentication which should be disabled:
Ensure that the Enable IEEE 802.1x authentication for this network check box is not checked.
http://www.efelix.co.uk/tech/1010.html
It seems updating Windows XP to Service Pack 2 fixes that.

Airport Express not working, it disconeects over and over again

I have 3 airport express base stations, 2 of them work fine, but the third one doesnt. When I plug it in, it starts, and it gets the green light, so everythiing should me working right, but when i click on it on the airport utility it freezes and reboots, it gets the blinking orange light for liek 5 minutes or more, again when i get the green light and try to use airtunes, it stops working. I already tried reseting it.
what can i do?

Macs and PCs work together just fine with an Airport Express.
Unfortunately, you have given us little information to help you with beyond simply indicating that "it doesn't work". Please elaborate:
1. do the Mac and PC "see" the Airport Express wireless network?
2. if so, does the Airport Utility (or Airport Admin Utility) on either computer "see" the Airport Express and allow you to view/change its configuration?
3. what does the status light on the Airport Express show?
4. if you can connect to the Airport Express wireless network from the PC and/or Mac, is the only problem that you cannot access the internet?
5. what kind of reset did you do? To really start from scratch, do a factory default reset as described here.

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

HT4587 How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on hite background?

How do you read the Serial Number on the back of the Airport Express? It is sop small and silver writing on white background?

http://support.apple.com/kb/ht3546

Airport Express 802.11n Wi-Fi alternating green amber light

Apparent power surge causes AirPort Express 802.11n to not work correctly. Has alternating Green, Green, Amber light. How do I restore notmal functions?

As a last resort, try a Factory Default Reset to see if that might help.
Power off the Express for a minute
Hold in the reset button first, and keep holding it for another 10 seconds while you simultaneously plug the power back into the Express
Release the reset button after the hold period and allow a full minute for the Express to restart
At this point, you want to see a slow, blinking amber light, which is an indicatation that the Express has been reset and can now be reconfigured.
If after a few tries with the Factory Default Reset the Express still displays an alternating amber and green light, the Express has been damaged and will need to be replaced.

Airport express worked fine now shows only constant amber light ?

airport express worked fine now shows only constant amber light ?

A solid amber light indicates that the AirPort Express cannot get out of startup mode.....likely because of a power supply issue within the device.
Try a Factory Default Reset as a last resort to see if that might help. To do this....
Power off the AirPort Express and wait a minute or two
Hold in the reset button on the Express first, and keep holding it for 9-10 seconds while you simultaneously plug the Express back into power
Release the reset button after the hold period and allow a full minute for the Express to restart
At this point, if the Express is operating correctly, the amber light will be blinking slowly and you can reconfigure the Express again.
If the amber light remains solid after a few reset attempts, the internal power supply on the Express is faulty and the device will need to be replaced.

Can see Airport Express, but iTunes won't connect and more..

I'm running Mac OSX 10.4.2 on an Aluminium PowerBook G4, connected to an Airport Extreme Base Station - which can use the internet etc easily. I have an Airport Express, which can be seen & changed in Airport Admin, and can be seen in iTunes - but can not be connected to in iTunes - it tries for about 30 seconds, and then gives up, not even an error message? I'm not sure if it's a related issue, buit an old iBook running OSX 10.3.9, connects to the same Airport Express, no problems. But the PowerBook, whilst it can see the iBook, won't connect to the iBook via Airport - it tells me it is not operational, or something.
Can anyone think of anything that may fix the problem?
Thanks in advance.

Is this a new problem on this Powerbook - or has it never worked? While there are many (and some very obscure) causes for this problem, one of the more common causes is firewall software of some sort. This also includes applications designed to monitor outgoing network data (like spyware) on a Mac, like "Little Snitch".

Airport express fried? It has a smell and no light

Similar Messages

Maybe you are looking for