Airport express, green light but not working.

while streaming music to airport express, it suddenly stops. Green light on AE, but connection with wireless net is gone. iPad airport express app tells that the AE was in a network and isn't anymore. Only way to get it back working is power off/on. Sounds familiar? Any tips what can be the issue?

Is the AirPort Express the only wireless router in your current network configuration or is it configured to "join" another wireless network for streaming. If there is another wireless router, where is the Express placed in relation to it ... same room, different room, different floor?
When streaming from your iPad, is it in the same room, different room, or different floor than the Express?

Similar Messages

  • Airport Express Green Light but No Wireless Connection

    I would be grateful for any help on an issue that has been driving me crazy! I have spent countless hours trying countless solutions. My wireless network is set up as such: Time Capsule serving as a Base Station, Airport Extreme, 1 Airport Express downstairs in dining room, 1 Airport Express upstairs landing, and 1 Airport Express in the bedroom. All are new, 802.11n. Time Capsule is configured as Create a Wireless Network/Allow This Network to be Extended. All other devices are configured as Extend a Wireless Network/Allow Wireless Clients. All device lights are green. The Time Capsule and Extreme produce a signal and have strong wireless connectivity. The expresses, though green, do not receive a signal and I cannot connect with laptop/iPhone etc. I have tried pretty much everything including changing the channels on the Time Capsule - basically ran through 10 of them with no difference. The Extreme relays strong wireless signal to the upper landing, but the Express - though showing green - simply does not put out a signal. Getting desperate here as have great wireless interest downstairs, but nothing upstairs no matter what I try. Any ideas MOST welcome. (ps...all firmware is up to date)

    Kinda have a similar problem. Hijacking it.
    Everything's up to date. About 1 year old.
    Modem to AXp via Ethernet, AXp set to create a wireless network, shows greenlight.
    Modem is a Motorola SB6120. Probably isn't relevant but let's mention it just to be sure.
    Alu Macbook detects AXp. In Airport Utility, when I right-click Identify, it says orange/green flickering light. However, the state is greenlighted and it says that it's normal.
    All of my devices detect and can connect to my network. It seems everything's working alright except that none can access Internet.
    Internet works fine when I directly connect my modem to my Macbook and when I reset the former (which, according to what I read here and there, is fine).
    Everything (Macbook, iPod Touch, Wii) was working fine until yesterday afternoon, and nothing since then. Tried resetting the AXp, cycle everything (unplug all, plug in modem, AXp and boot Macbook, in that order) and it didn't work.
    Whether it's set to be distributing IP adresses to be sharing a public IP adress, it doesn't work.
    I can click on renew lease, I can reboot my devices, same results.
    So, where do I go from here? Just so you know, I know next to nothing about network stuff. Thanks in advance and here's the mandatory "sorry for my horrible english".

  • Airport Express Green Light - Can't Get To Internet

    Hello.
    I'm staying at a friends cottage. Their internet works fine (I can connect via ethernet to the internet). I can get the wireless network to work fine using Airport Express (green light on AX, shows network signal in menu bar).
    When I try and connect to the internet via AX it fails.
    I am using WPA2 Personal for the password.
    Am I missing something simple?
    Thanks in advance.
    Hello... I tried to find this before I asked, but I couldn't narrow the search enough to find an answer... I'm sorry if this has been asked a lot before.

    Michael Tutton1 wrote:
    I am connected directly from the back of the modem to the ethernet on the AX.
    So you're replacing the friends' equipment (if any) with your AX? Some questions:
    1) Did you remove power from the modem for several minutes before you connected your AX? Some modems will refuse to connect to a "new" device until they're reset by that process.
    2) How is your AX configured? Settings in AirPort Utility of particular interest are AirPort panel, Wireless tab, Wireless Mode and Internet panel, Internet Connection tab, Connection Sharing.

  • Just got my airport express and it's NOT working (Help)

    Hi,
    I've just got my airport express 2 days a go and I've try many time to set it with my black macbook and my pc and it's not working at all...
    When I've plugged it, the ligth went grenn and then solid amber and then it flashed as it was suppose to do. After that I wend in the "utility airport" on my macbook, I was seeing my airport express but when I clicked continue, the computer was searching for something for 30 minutes and then I realized that I was connected on the internet but that my networks were not configured.
    So I've decided to try to do a factory reset. And then my macbook couldn't see my airport anymore. So I've try with my pc and it has recognized my airport. I've started to do the configuration, but at some point, my computer couldn't see my airport anymore...
    So please help, what can I do to make airport express properly.
    Thanks
    Vero

    I really need some help please...
    I've tried to connect directly my macbook to airport with my ethernet cable to configure airport express... but when I've open the airport express utility, my computer couldn't find my airport express...
    PLEASE I NEED SERIOUS HELP !!!
    I really think about bringing airport back to the apple store

  • Airport Express USB printing suddenly not working

    Hi, we have an airport express which doesn't seem to be working properly. We've had it at least 2 years now. All has been working fine but suddenly USB printing is not working on it. When I load up AirPort utility and go to the printers tab, it says "USB printers: None". It didn't use to say that! I've checked the printer - it works fine when printing direct from computer to printer over USB (hence both the printer and the USB lead are fine). We use the airport express for iTunes and it works fine. The airport is running version 6.3. We used to print (when it worked) from both Windows computers running XP and from macs running Snow Leopard...
    Any thoughts?
    Edward

    Erm... help!
    In a bid to try to sort out the problem myself, I decided to restore the Airport Express (b/g) to the factory default and see if that helped... I did this through the airport utility. The airport reset fine and I then went through the set-up wizard. However, when it then tried to restart as part of the setup process, it said that there was an error and that it could not restart. It said to restart the airport utility and try again. This I did but it cannot see the airport. If I rescan, it says the same thing (unable to find any apple wireless devices). What should I do?
    All thoughts and suggestions gratefully received!
    Edward

  • Just installed new Time Capsule now my airport express range extender will not work any suggestions

    Just replaced my Time capsule that died with a new one now my airport express range extender won't work.  Any sugesstions?

    Thank you William, I reconfigured the Airport Express and it works perfectly.  Sorry I did not get back to you sooner but I came down with a bad cold.
    Thank You, and Merry Christmas and a Happy New Year.
    raiderron

  • Airport express Green light on, itunes transmitting, internet not working

    Hi,
    I have a thinkpad running XP and a cable/telephony modem from comcast. I installed the airport express following the directions and got a blinking amber light and no functioning internet or airtunes. I then took down the IP address, router address, etc (IP Address: 66.30.116.41 Subnet Mask: 255.255.248.0 Default Gateway: 66.30.112.1
    DHCP Server: 68.87.71.8 DNS Servers: 68.87.71.226, 68.87.73.242) from my modem and manually configured those settings into my airport express, and now I have a green light and am able to transmit itunes but can't access the internet. My computer connects to the network but then I can't load any pages. When I try "repair," it fails when reconnecting to the network. The IP adress when I'm connected to AX begins with 10.
    Any suggestions?
    Thanks!
    RCC

    no answer but same problem as yours. any news on your side ?

  • Airport Express - green light, no connection to net, but Windows cabled OK

    Hi all,
    For 2 days I've been having a strange problem:
    Suddenly I don't get a valid internet connection through my airport express (AX), although the whole setup has worked for 3 years.
    I am connected that way: a DSL modem from my network provider is connected via ethernet cord to the AX. This opens a WPA2-encrypted network via PPPoE, and uses a MAC-Address filter.
    So far, I have settled it down that way:
    When working under Mac OS X (latest updates for Leopard are installed, the last one was a pure application update for notes, pages and keynote 2 days ago), I don't get a valid connection: Via AirPort it cannot find the PPPoE host, although the green light is solid visible. Via Ethernet-Cable I also don't get access to the PPPoE host.
    Here comes the strange thing: When working under boot-camped Windows XP, setting up a network connection via Ethernet cord, it works! Obviously, when trying to connect wireless to the AX, a connection could be established, but there is no traffic possible.
    Any suggestions or hel would be very much appreciated !
    Could it be, that the last application updates for iWork had these effects? Would be too strange to believe..
    Thanks in advance,
    Andre
    BTW: MacBook Pro, 10.5 Leopard with all system updates are installed. No custom firewall or such things.

    Hi Andre
    I just had a similar thing happen to me where airport has been running fine for about a year and suddenly my iMac can't find the network although other wireless networks are found and our Wii, PS3 and PC notebook all connect. I contacted Apple and found that resetting the Airport Express was the only solution as it was originally set up on the Mac. The fact that it was picking up other wireless networks proved that there was nothing wrong with the wireless internals in the Mac.
    So I factory reset the Airport Express by pressing the tiny button with a pen until it started flashing really quickly. Set it all up again on the Mac, then let the AE restart, then unplugged power from the wall for both the modem and AE for 20 seconds and reconnected.
    It did the job for me - I hope it works for you.

  • Brand New Airport Express-Green Light Wireless, Dead Green Wired

    I just bought a brand-new airport express device. I have a cable modem connected to a dual band AirPort Extreme base station in my basement. My house is wired with Cat5 Ethernet cable. In a far bedroom, I am replacing an airport express-N (previous model) that was hard-wired to the Extreme. Always worked perfectly in extending and supplying 2.4ghz band wifi to that part of the house. I bought the brand-new AirPort Express to utilize the dual band bridge.
    After many hours of trying, this new airport express will only work properly if I do not plug in the Ethernet cable. It seems to be performing well, but i was under the impression that an ethernet cable should be used to physically connect the AirPort devices each other.
    Currently, in this wireless setup, I do have both bands available. I feel that if I used the cable, I would have much stronger better signal.
    Interestingly, when I do ether-connect the airport devices together. My AirPort Utility looses all of my AirPort devices and shows (with a yellow dot) that my Internet (modem) is not available. At the same time, all of my AirPort devices continue to show a green light. I am unable to connect anything with any of my wireless devices.
    Also, when everything seems to be working fine, my AirPort Utility does depict the wireless set up with a dashed line between the two AirPort devices representing that it is wireless connection.
    With my last AirPort Express, a wireless set did extend the range, but only while slowing everything down. An ethernet cable, when introduced, made everything work perfectly, during which time the AirPort Utility depicted that setup with all solid line indicating wired connectivity.
    I would appreciate any feedback from anyone who might be able to tell me why when I introducing ethernet to the new AirPort Express, it takes down the entire wireless network.
    Hi, of course, try all of the normal troubleshooting suggestions. I recycled all devices I have rebooted everything.

    It's always a good idea to do a complete power recycle when switching out network components ...
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBSn; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Airport Extreme - green light, but no internet

    I've been using my airport extreme for 2 years, connected to an Alcatel-Lucent modem.
    A couple of months ago I bought 2 airport express devices and cabled them to the extreme in bridge mode, working just fine.
    After a 2-week trip I returned home and I found that all the devices showed a green light in the Airport Utility, but the internet was orange.
    I could connect myself to the network, play music in my airplay sound system, but couldn't surf the web or use my apple tv.
    Now internet is changing from green to orange every 5 minutes.
    I tried everything that I have read in different forums, but with bad results.
    Any other suggestion?
    Thank you very much.

    I tried working on my computer with a wired connection from the modem itself and it works perfectly.
    If you mean that you have the computer connected directly to the modem and things work OK, then leave things "as is" for at least a few hours.....longer would be better....and report on your results at that time.
    Then, we will do the next check.

  • Airport Extreme green light but can't see the wifi network

    Hello, coming back from the holidays I can't see my Wifi network anymore (From PS3, Phone, Computers ..etc.). My airport has a greenlight and the internet is working fine if my computer is connected with an Ethernet cable. I re-did the configuration many times and I did a hard reset of both my modem and the airport. It is not setted to a hidden connection. All the settings are basic like before. The only difference is that I did the update to 7.6.4.

    I think you were right, my airport was broken and I noticed that at the end of the configuration process where there's a green checkmark it was written in the bottom that a wifi device wasn't working properly. Nothing could be done to make it work though.
    I bought a new Airport Express now but I still have a major problem. I was able to configure it through wifi with my iMac without any problem and now it is connected to the internet via wifi perfectly but i STILL can't see the network with either my Android phone or my PS3 console !?
    - Brand new airport express
    - configured to "create a wifi network" with a WPA2 password using the simple steps of the airport utility
    - Airport Utility 5.6.1
    I did reset the airport express a few times with the utility and by removing the power cord. I also did reset my iMac and I can still connect to the wifi just fine with it.

  • Airport Express and Extreme are not working together

    My new airport extreme came up just fine. All my Macs and PCs connected effortlessly.
    The same can not be said for my Airport Express. I reset it, and it takes the config, then vanishes. Connected directly to my Mac, to the Airport Express, or via wireless to the express, it still just disappears and gives a blinking amber light.
    I tried re-installing 6.3 firmware, with no luck. Any ideas?

    Dan,
    Thanks for the clarification. The behavior you're encountering sounds as if it may be the expected behavior of an Airport Express after it has been set to client mode, but wasn't able to join the network. Typically when setting up an Airport Express you'd want the unit to be in the same room as the Extreme, and then if the Airport LED is not going green then it's typically an authentication association relates situation. Have you reviewed knowledge base article http://docs.info.apple.com/article.html?artnum=302153 ?
    Regards,
    Chris

  • AirPort Express (802.11g) suddenly not working

    Hi;
    I've been using my AirPort Express unit for years now. For the last 6 months I've been using it to supply music to a set of speakers in my living room with no problem.
    Suddenly today, I notice that for some reason, AirTunes can't see the Unit, nor can AirPort Admin Utility nor AirPort Setup Assistant.
    The Unit has a solid green light on it, indicating it thinks it's working, but I can't seem to find it.
    Any clues?
    Thanks in advance.

    UPDATE: I reset the unit, and was able to configure it using AirPort Setup Assistant, but although the light is still solid green, iTunes and AirPort Admin still can't see it.

  • Airport connected to internet, but not working in Safari or Firefox?

    I had an airport network in my last apt. We just moved, and I can't set it up in our new apt! Our internet connect def works, and I get a green light on the airport. It says: <Airport is connected to the network "xxx". You are connected to the Internet via Airport/>
    But then both Safari and Firefox say "server not found"!
    what am I doing wrong?
      Mac OS X (10.3.9)  

    I have other info on the modem I'm trying to connect to.
    It is of a sensitive nature so I don't want to post it here.
    HELP PLEASE!
    2WIRE Modem is having a problem connecting the browser. the modem says I'm connected but my browser can't surf.
    I do have the network name as well as the encryption key.

  • Airport Express- Amber Light Blinking - Nothing works!

    Looking for Henry B. (or anyone else with a bright idea).
    A few days ago, no airport connection from my PB G4. I have had the same setup for the last year and a half without a problem - Airport 802.11b to AXP to T1 connection to/from my wall (no modem or router, etc.).
    Problems started with the no-connection. Clicking on the Airport icon in the toolbar gave me the endless spinning wheel. Hard shut down, which I NEVER have to do. In the last four days, I've done hard shut downs about 30-50 times.
    AXP: had a green light. Unplugged for 20 seconds, plugged back in to a green light. Did a soft reset, thinking something had to change so the PB would see the AXP. Amber blinking light. Hard reset. Amber blinking light. Factory default reset: Amber blinking light. Every time, the PB doesn't see the AXP or an Apple Newtork XXXXXX.
    Plugging the ethernet cable from the wall directly into the PB works great. Called the ISP, great technician could see my connection, said everything was fine on their end and that they do not limit any wireless/router equipment usage.
    Again, not a single problem until a few days ago.
    With all the crashes, I saw that some Finder crashes were involving Application Enhancer. I had Application Enhancer until an hour ago - uninstalled it. Didn't help. Also read about StuffIt AVR causing problems bu thaven't located any file with that name.
    Henry B., if you're out there, please send me a miracle cure.
    Cheers all,
    Jason

    clicking Airport icon shows no available networks (i used to see some of the meighbors' networks sometimes. so i can't seem to connect wirelessly.
    have another graphite iBook clamshell running Panther. didn't mention this earlier, but that computer has been acting similar to mine since the same day a few days ago. i just opened airport setup assistant and have the spinning ball for the last four minutes.
    again, both computers worked fine until that day. the only things i could think of that would cause this coincidence are power surge, virus, or something to do with airport. PB is working fine now, after 4-5 restarts today. iBook now seems frozen.

Maybe you are looking for

  • Help with JFrames:Two JFrames dont paint properly

    Hello Guys.I am new here and I would like to ask for some help. I have a problem with me Java application. My main Class is the MainGUI class which has some selection components and is a JFrame.When the user presses the "proceed" button, it will make

  • Error in server0.Java engine is unable to startup

    Hi experts we are using PI 7.00 In this   we  are unable to start java engine and it is saying that java VM terminated with non zero exit code.(-11113).If i access SXMB_IFR it is giving this error. "SAP WebAS Engine is starting or started but not yet

  • Photoshop Elements 9 and 16 bit support

    Some days ago i bought a copy of Elements 9. I do not own a previous version. I wasn't aware at the time of purchace that elements 9 does not support 16 bit editing. It was a mistake, buying without trying. I am willing to pay extra for a patch or up

  • Logic 64bit - slow 3rd party plugin adoption

    One of the biggest and long awaited feature in the recent Logic upgrade was it's 64bit support. The breaking through the 4GM Memory barrier. No more holding back on the amount of memory hungry plugin channels. After a long struggle with the proper In

  • DVCPro HD frame rate issues

    I'm sure that this question has been asked before, but I performed a couple searches and couldn't find a thread to perfectly answer it. I have a tape that was shot (with the Pansasonic HDX900, shot to tape and not P2) at two formats, 720/24P and 720/