Airport express has stopped working when college switched network to 'N'

Hi all,
My university has just switched their wireless to 'N'-band. My airport express ('G') is now upset: not only has airtunes stopped working (I previously had joined it to the dorm wireless network), but I can no longer even access my airport in the Airport Utility (5.3.2).
I've done a hard reset of my airport express and I still cannot access the device via the airport utility. When I click 'rescan', the device is never found.
I have noticed, however, the default network "Apple Network 600eab' appearing among my wireless network choices. Unfortunately, Airport never actually lets me join that network.
Does anyone have any ideas I can try?
Thanks
LD

I've had to go back to firmware 7.4.1 and that seems to work.  Anyone know what is up with 7.5.2?

Similar Messages

  • My airport express has stopped working when set to 802.11 b/g

    All of a sudden I have basically no signal when my Airport Extreme is set to 802.11n (802.11 b/g compatible).  It works fine at 802.11a compatible, but the Playstation 3 needs the g network.

    I've had to go back to firmware 7.4.1 and that seems to work.  Anyone know what is up with 7.5.2?

  • Airport Express has stopped working, no IP-adress

    Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
    Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
    It can see my Airport Extreme.
    Thanks in advance.
    Best
    Clintcool1968

    Try resetting the Airport Express.
    If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
    Do you have it set to "Join" the Extreme network? or something else?
    See this Apple doc on how to reset your base station.
    http://support.apple.com/kb/HT3728
    Also, you would not see it in your Network preference panel in the System Preferences.
    You will only see the main network which is your Airport Extreme....
    Unless you have 2 separate networks....
    How many do you have?

  • Airport Express has stopped working

    Hi.
    My AE has just stopped working and now can't connect to the network.  I have tried a harware reset and all I get is the amber light and now and again it flashes then turns green and then back to amber.  It looks to me as if the something has damaged the hardware as I cant get it to showup in my airport utility.
    Regards
    Amidabrian

    If you have tried a Factory Default Reset a few times, and the AirPort Express is still acting up, it is likely defective and will need to be replaced.
    Resetting an AirPort Base Station or Time Capsule FAQ
    If it is out of warranty......and you have the patience.....and want to take a real longshot......carefully saw open the case of the Express along the center seam to open up the device and look for something obvious....like a connector that has come loose, broken wire, etc.

  • My airport express has stopped working as an extender.

    Aloha:
    I have been successfully using my my airport Express as an extender for several months when it just quit working.  I now have plugged it in right next to my computer and airport Extreme to trouble shoot.
    It just sits there blinking orange.  I have pushed the reset button to no avail.  I have unplugged it, pushed and held reset while plugging it in, still  it flashes yellow.
    Any good ideas?
    Thanks
    Dan Page
    Hawaii

    When you performed the reset, you returned the Express back to its original new, out of box settings. So, you have to reconfigure it again to with settings for your network. You will not see a green light until you complete this process.
    Temporarily, connect a spare Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the AirPort Express
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Base Station tab below the row of icons and assign a name to the Express, a device password and adjust Time Zone settings
    Click the Wireless tab and adjust settings to look like this:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Same name as the AirPort Extreme wireless network
    Enter a check mark next to "Allow wireless clients"
    Wireless Security = WPA/WPA2 Personal
    Wireless Password = Same password as the AirPort Extreme wirelesss network
    Confirm Password
    Click Update at the lower right
    As soon as you see the message that the settings have been stored successfully, close AirPort Utility and disconnect the Ethernet cable
    Wait 40-45 seconds for a green light. Now you can move the Express back to the desired location and plug it back in

  • Hi for some reason my Airport Express has stopped working. It just glows Amber and occasionally flashes green but goes back to amber. AU can't see it. I have a macbook and want to connect via my existing wifi to stream music, can someone help please!

    Hi, title says it all. I have been doing this for years and don't know what has changed.....
    Reset doesn't seem to work, this includes factory! Please help.

    It certainly would not hurt to let the folks at the Apple store take a look to verify things. If the product is less than a year old, or you have AppleCare on one of your Mac, the Express may qualify for free replacement.
    The Apple Store may also some some refurbished Express devices on hand at a discount if you need to buy, or they can direct you to the Apple online store for the same thing.

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • Error "Licensing for this product has stopped working" when you launch Acrobat 9

    Hi,
    I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
    Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

    Wow,
    I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
    I reinstalled both from the "original media" (dmg's)  with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
    I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • Error message - Captivate has stopped working - when publishing to MP4

    I get and error message that Captivate has stopped working when I try to publish to an MP4. I am using Captivate 6. How do I solve this problem?

    Hi Shivers,
    What is the Exact version of Captivate you are using (Go to Help > About Adobe Captivate) ?
    Please try to clear the cache of Captivate ( Go to Edit > Prefrences > General Settings)
    See Screenshot
    Please clear cache from computer as well..
       Go to Start>Run>Type %temp% and then click on ok
    Delete all the files from that folder(Some of the files which are in used will not get deleted , Ignore them)
    Then try to Run as Admin and check if this works
    Thanks and Regards
    Himanshu Satija

  • ITunes has stopped working when I click "Get Info"

    Anyone can help me please..?
    My iTunes has *stopped working* when I right click on any song click "*Get Info*". It just stop and crash. I'm on Vista 32bit. Thanks before...

    Well it's working fine again.........................................I don't get it - -

  • Skype has stopped working when i make a call or vi...

    i need help my skype has stopped working when i make a call or video call.. i tried all solution my webcam works fine my mic too help me fast i use skype to study and work and thx :'( email me on [Mod edit: Please do not include personal/private information when making a public post. Thanks!]
    Attachments:
    Untitled.png ‏1174 KB

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Jrew.exe has stopped working when iam trying to install oracle on vista

    hi,
    iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving it

    Duplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista

Maybe you are looking for

  • PP CC 2014 and AE CC 2014 issues an nMacPro

    My frustration with the combination of Adobe and the new MacPro grows. I’ve posted in here before and everyone has been helpful, I’m hoping you can help shed some light once more. First I’ll explain the issue then let you know how the system is arran

  • Vendor Return Excise Invoice + VAT

    Hi All, We are make Vendor Return Excise Invoice wrt J1IS and Credit note by MIRO, But we want one consolidated print with Excise +Vat, How the same can be done Regards Niti Narayan

  • I added a CD to iTunes and every track is a separate album.  How do I combine them?

    I do not know how to combine several tracks into one CD.

  • Photo Viewing Size?

    How do you view a photo at 100% size like you can do in Photoshop? The zoom slider is cool but it does not give you any info as to what magnification size the image is at. Can anyone help? Thanks, Martin.

  • Synchronizing Address Book against a home server

    I have a Bubba Two home server setup with Debian Etch, and a Mac Mini. I want to synchronize Address Book's contacts against this home server. What is the protocol or method of doing this? I want to synchronize the Address Book on two Macs through th