Airport express light is green but is not working

My airport express is on,light is green, all of my computers see it though Airport Utility however the computer that is 2 feet away has no internet abilities. It however see the house network,sign in but no not able to communicate with other house computers as well as the internet. 'The lights are on but no one is at home'

If all the other computers can connect to the Internet, try power cycling your entire network.
Power everyhing down on the network...all devices, order is not important
Wait a moment, then start the modem first and let it run a moment by itself
Then start your AirPort Express the same way
Continue starting the devices the same way until everything is back up
Check for Internet connections on all devices
Please post on your results

Similar Messages

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

My light is green but wifi not working

The power went out today, now my wifi is not working even though the light is green. The internet is back up and running. Anyone know what I need to do. I have tried resetting a few times.

The power went out today, now my wifi is not working even though the light is green. The internet is back up and running. Anyone know what I need to do. I have tried resetting a few times.

Airport Express in solid green, but no internet.

Hi there,
I have been travelling around with my airport express and i encountered problems in some hotels.
My Airport express lights solid green, i can join my own network with the password that i set. however, my laptop/iphone does not have any form of connectivity at all. my iphone safari will prompt that i have no internet connection available.
Are my setting wrong? All i want is to plug the hotel's ethernet cable into the device to get wireless network.
In places where my Airport Express works fine, i will join my wireless network with my password, then the hotel's webpage will pop up on my Ipohne Safari or on my Laptop's explorer for me to purchase internet.
Thanks for helping.

Violet Ailee wrote:
Are my setting wrong?
Probably not. If your Express light is green, it's getting an IP address from the hotel's router and that's pretty much all it (and you) can do.
The unfortunate fact is that many hotels are notorious for woefully unreliable service. Even when they work some are too slow to use anyway. Hotels with reliable and fast service are rare, at least in the U.S.
If it's not working for you the way you've described, it's probably not working for anyone.
Complain to the hotel's management. People have justifiably grown to expect Internet service in hotels, and wireless devices like iPhones and iPads are the future.

My power cord lights up green, but is not charging my macbook pro. Any idea what I should do?

I have a MacBook Pro, about 2 years old. When I plug in the power cord, it glowa green but is not charging the computer. Any ideas?

Reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't get it charging again, see this article:
http://support.apple.com/kb/TS1713
If you have access to another AC adapter, see whether that one works better.

How can I tell what is causing wifi to drop - airport express light is green (iPad can find network, but no internet connection) and TWC cable modem has usual lights glowing?

Everything seems normal, except getting the internet connection. I have an old airport express - 802.11g

Is it the iPad that is the only device that cannot connect to the Internet....and other wireless devices can connect OK.....or.....is it a case of none of the wireless devices being able to connect to the Internet?
One of the potential issues here is that the iPad cannot be used to make any configuration changes to the older version of the AirPort Express that you have, so hopefully you have another Mac there that could be used to make any changes if needed.

Airport (Express) is turned on but is not connected to a network.

Hi
I am having an issue with my Airport Express set up. I have had 18 months of use of the AE for internet access (no other wireless hardware used), but have suddenly lost the wireless ability.
In my network preferences it shows the AE with an amber light (green on the actual AE) with the message "Airport is turned on but is not connected to a network". When I look at the Airport utility there is no AE showing even after multiple "rescans"
I have gone through multiple processes of turning on and off the router, AE and MBP to no avail. I have gone through soft and hard reboots to intermittent visibility in the Airport Utility. This includes direct linking MBP to AE with Ethernet cable
When the AE finally shows in the utility, i have reset all passwords etc as advised by program, but when the utility goes to restart the AE it loses it and I end up back at square one
I know the internet is working due to Ethernet directly into the MBP
I have take to a friends and they plug and play ... so know the AE works
Is there something i am not doing? Why is the AE and MBP not talking to each other?
Please someone help me !!

Hi, Kozou. Welcome to the forums!
Connect your computer to the Express's Ethernet port and open AirPort Utility. Does this allow AirPort Utility to find your Express?
If so, go through the setup process. After the Express restarts, disconnect it from the computer and connect it to your DSL, cable modem, or whatever provides your internet connection. Wait a minute or so. The light on the Express should turn green.
Now tell your MBP to join the wireless network created by the Express. You can do this using the AirPort menu or the Network pane of System Preferences.
Does this work?

I want to set up my Airport Express Base Station again but do not remember how. Please walk me thru it.

I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.

All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
Open the airport utility which you find under applications/utilties.
Router setting will depend on what version of the utility you are using.
In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
https://discussions.apple.com/community/wireless/airport
Manuals link http://support.apple.com/manuals/%23airport
If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
What modem do you have?
I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
How exactly is the airport setup now?
How do you connect to the modem?
How is the printer connected? What kind of printer?

Airport Express WiFi network MAC address filtering not working

I have an Airport Express WiFi network which I bought and installed new in 2011. Initially I enabled MAC address access control and populated a list. It was working perfectly, I know, because a niece visiting tried to connect her iPhone and could not until I added its MAC address to the allowed list. Now however, anyone can connect without being added to the list. I think I read somewhere that a recent firmware update permanently disabled MAC filtering in Airport Express, even when it was previously working? Can anyone enlighten me about what's going on here?

In a sense those are/were/should operate as two separate functions, which they did before recently.
They do operate as two separate functions.....but it all depends on how you have the default rule setup in Timed Access.
If the default rule in Timed Access is set to No Access.......then a wireless device cannot connect....even it has the password for the network.....unless it has been setup on the list of allowed devices in Timed Access.
I have checked this 3 times this evening to verify. It works as it always has, and as expected.
If the default rule in Timed Access is set to Unlimited, then any device can connect to the network if it has the password. Devices that are listed or specified in Timed Access will be allowed to connect at the specific times that have been set up for each device.
So, if you want to use the more traditional MAC Access Control settings, the default rule has to be set to No Access and then you must set up a rule for each device that you want to allow to connect to the network. Only devices on the Timed Access list will be allowed to connect to the network. Other devices will not be able to connect to the network....even if they have the correct password.
If a recent firmware update has changed things from what they have always been.....then I am not affected....and I should be if I am using the same firmware as others.

Airport Extreme Desktop connected wirelessly but laptop not working

I have an iMac working just fine connected to the internet via my Airport Extreme. We also have 2 laptops and 2 iphones in our home and none of them are able to connect to the internet. I am sensing this is an airport issue. I've already explored all modem issues. Everything is working fine there. I am getting wireless as my iMac is able to connect, however no laptops are able to.
We've rebooted, reset and emptied all cache's etc.
Am I correct to think my extreme may be the issue? If so, is it time to replace it?
Thanks in advance for your thoughts.

Joe and Hackintosh,
Thank you both for your replies. What I figured out is the router was going on my airport extreme. It was 7 years old so I guess it's time for them to say good bye.
Thanks again!

My wi-fi worked fine on Airport Express two days ago. Now the light is green, but I can't get the Internet on my satellite connection. I've checked Network Preferences, Aiport Express menu, and the satellite tech support. The Ethernet connection works.

My wi-fi connection from my iPad via the Airport Express Base Station on my home computer worked just fine until yesterday morning. I have a Macintosh G5 with a satellite connection. I could not get an Internet connection. After using the Network Preferences and Aiport Express applications several times, then unplugging and replugging in the computer, satellite modem and Airport Express module, checking the satellite dish for any obstructions, and so on, the computer still wouldn't connect to the Internet. (The green light was on in the Airport Express module.) I called the satellite company technical support division last night. The tech couldn't find any problem with the satellite connection. When I plugged the satellite modem cord directly into the Ethernet outlet on my computer, I could pick up the Internet.
Today, the Airport Express module still has a green light but still doesn't connect to the Internet. The only thing I can think of is that lights went out for about 15 minutes yesterday morning. All of my electronics, except the Aiport Express Base Station, are on surge protectors. Why would the Airport Express module still have a green light if it was damaged by the electrical outage?
I bought the module in 2009. I have never had problems with Apple equipment before this. Is this base station fixable?
I would appreciate your suggestions.

Hello everyone. I too have experienced the same problem Mary described starting on the same day she mentioned January 12. I have a G5 iMac, a G5 mini-mac, and a G4 laptop. They were all working fine but all have mostly the same problem now in that the G4 does not connect at all and the G5s connect once in a while after restarts but do not maintain the connection. In my case there was no power interruption. In fact, the G4 laptop was not even connected to the home power connection. My iPad2 and iPhone 4s wireless work fine and a wireless PC and Android tablet work fine as well. The G5 and G4 work fine on an ethernet connection. ISP tech support (AT&T u-Verse) was very generous with their time in trying to solve my problem although it was established early on that their connection and equipment was working fine and that the problem was with my computers. They walked me through a manual reset of all the particulars on IP addresses etc. so the problem was not related to that either. In the end ISP tech support concluded that the problem must lie with the Airport driver. For some reason it changes the IP addresses to an incorrect address so it cannot connect. Indeed when I tried the diagnostics on the G4 I got a window Pop-up that said an application had reset my settings. (In retrospect I seem to recall that I may have gotten that same message early on with the G5s but at that time I did not think much about it and went about trying to reset the settings but that process never concluded well) I think that the problem may be that there must have been an update of the Airport software that was not backward compatible with the G5 and older Macs. I mention all this for two reasons. First, perhaps someone out there who knows better than I do how to bring this to Apple's attention and perhaps they will address this. Second, I would be curious to know whether there is anyway one can return a configuration on Macs to some earlier time period (as you can on PCs) when everything worked and then leave it that way foregoing any subseqent upgrades or any subsequent apps?

My airport express is setup, the light is green but I have no Internet connection

i have setup my airport express the light is green but I get no wifi

I have a macbook pro 13'' with MAC OS X. Recently bought and installed airport express when it does not drop the WiFi conncetion it works great. Getting frustrated with the fact that I keep losing my WiFi connection, when this happens I check my iphone and I can access the internet do problem while my Macbook pro cannot? After doing some research on the problem I found out that this is not an uncommon problem specially or those who have upgraded to MAC OS X. From what I understand there is a a bug in the WiFi connection chip! Am going to the Apple store today to see what they have to say. I hope there is a fix for this!

Airport Express Shows in WAN, but not Wireless

I have an old Airport Express and a Time Machine (and Powerbook 13" 2011 model ... OSX 10.8.2). I have been using the TM fine for quite some time now. I used to use the AE, but packed it away for the last two years. Having just gotten a new stereo, I would like to play music via the AE again, as I used to.
However now I cannot get the AE to show up in Airport Utility. If I plug it in by Ethernet, it shows up fine and plays music. But the moment I unplug the Ethernet, I lose connection. I have tried to configure as Extend a Network and Join a Network, and the same thing happens with both ... music plays fine with plugged in, but cannot get a signal with wireless. AE does not show up at all on AU on wireless. Resetting the AE has no effect. The AE light is solid green the whole time.
I suspect I am doing something really basically wrong and dumb, but cannot figure it out at all. Any advice would be greatly appreciated.

ok here's an update.
now my airport express turns to green automatically (only in my room)
it will still be blinking amber anywhere else
so the problem is still not solved.

I have a Time Capsule as my router. I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

No, its is connected direct to the providers fiber box.

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

Airport express light is green but is not working

Similar Messages

Maybe you are looking for